Products

Bracket to suit the Quest remote above.

Waterproof remote is lightweight with intuitive user menus and simplified keypad with four customisable One-Boat Network buttons, three on the keypad and one side button. Program these buttons to functions that fit any fishing style, control connected Talon or Raptor shallow water anchors, Auto Stow/Deploy and Power Trim with RT Instinct and Ulterra models or even mark a waypoint on a connected Humminbird fish finder. Includes Minn Kota lanyard and carabiner and is powered by 2 AA batteries (included).

There are several different types of propellers available for the Minn Kota engines and most will only fit certain engines. Please have a look at the chart below to work out which prop belongs to which engine.

The Minn Kota Riptide I-PILOT Bowmount has been a popular unit for ages and whilst the original model was just available with a corded foot control it can now be purchased with I-PILOT. When you go to this model you do not get the foot pedal but rather the Bluetooth handheld remote. With I-PILOT and the hand held remote boat positioning becomes automatic. Set Spot-Locks, record paths, control speed, steering and more all from the palm of your hand. Its available in 55lb 12 volt or 70lb 24 volt thrust both in a 54" shaft length. 

The main features of the RT55 are the new and improved deploy assist lever and the Digital maximizer. DEPLOY ASSIST LEVER - Get optimized saltwater performance with Riptide’s re-engineered electric steer control, new deploy-assist lever, and a host of features that set the standards for power and control. Riptide Powerdrive’s new deploy assist lever puts you in motion and in pursuit of fish quickly and easily. Simply depress the lever to deploy the motor and you’re ready to go. When it’s time to move, it stows easily and securely – ready for action again as soon as you are. DIGITAL MAXIMIZER - Up to five times longer run time on a single charge. Standard on the Riptide Powerdrive Bowmount model.

NO ONE WILL BEAT THIS BUNDLE. You get the RT45 above in a 36" shaft, a 50 AMP Lithium 12v battery as well as the Lithium charger to suit. The battery weighs just 7Kgs and the dimensions are 280mm long by 230mm high by just 100mm wide.

The superior durability and long lasting performance of the all new and improved Riptide is also available for the back of the boat. Available in 4 models, all our transom mount motors are 12 volt and range from 40 to 55 lbs thrust. They feature an enhanced corrosion protection, 'sacrificial anode' system and all the rugged reliability you expect from Minn Kota. With the 'Push to Test' battery meter you get an instant state of charge reading at the push of a button. Rebuilt with an intuitive, easy-to-use design, the all-new Riptide Transom delivers up to 55 pounds of power and precision manoeuverability. With a push-to-test battery meter, the battery-extending power of Digital Maximizer (on select models) and unmatched corrosion protection, Riptide Transom means fish are out of places to hide

Available in 8 configurations, the every faithful Terrova has had a revamp for 2024. What makes Riptide Terrova so popular in Saltwater? How about unlocking more boat control than ever before. Start with Minn Kota’s most advanced GPS trolling system, including Spot-Lock. Top it off with all the thrust you need to take on any water and effortless stow and deploy. That’s what makes this workhorse one of the most trusted, most capable, and most proven motors on the water. Other features include: Stow/Deploy Lever, Advanced GPS Trolling System, Part of the One-Boat Network, Spot-Lock with Jog, Drift Mode, Real-time Battery Monitoring, Digital Maximizer, Indestructible Composite Shaft — Guaranteed for Life and now Mobile App Compatibility.

With a new one touch launch bracket, the Riptide Terrova Saltwater Advanced I-Pilot powerhouse features better performance, I-PILOT as standard and a new foot pedal option. New stow/deploy mechanism now with lift assist lets you move effortlessly in and out of the water. The I-PILOT is available in 6 models across 12, 24 and 36 volt options. Simply depress the handle and fall-away ramps effortlessly deploy the motor into the water. The balanced motor design makes stowing easy, and a special master cut-off switch automatically turns the power off when stowed. Includes Hand Held Remote and Heading Sensor.

IF YOU WANT THE DEAL OF THE YEAR THEN THIS IS IT. For a limited time at Hunts Marine we have the 55lb 60" Terrova above available as a package. Comes with the heading sensor, hand held remote, 50 amp circuit breaker, 70 amp 3 pin genuine power plug, quick release bracket, lock for quick release bracket and shaft stabiliser. Note: The package is available via an internet order and we will send it out (freight additional) or pickup from our Sydney store only.

Available in 2 sizes, the Minn Kota Riptide Terrova with I-LInk is the exact same engine as the standard Terrova however the I-Link feature lets you control the motor from your Humminbird fishfinder or its new touch-screen remote. It includes our new, most accurate Spot-Lock ever, every i-Pilot feature, and the ability to follow depth contours, save and retrace your Humminbird Current Track, and return to productive waypoints.

With auto stow and deploy and power trim, the saltwater Ulterra is available in 4 models with 80lb and 112lb thrust and with shaft lengths from 60" to a massive 72" to cater for the offshore angler who wants to hold those off-shore marks. Standard features of the Ulterra include a reinvented spot lock to hold you tighter to your fishing spot, new heading sensor, I-Pilot hand held remote, power trim and an optional foot pedal. CLICK HERE to see a great bunch of videos on how to use your Minn Kota Ulterra.

This replacement sheer pin suits current and superseded Minn Kota motors. There are two different sized sheer pins. One does engines up to (but not including) 80lbs and the other does 80lb engines and above.

A lot of people buy this so they can mount it on the wall of their garage and then you can hang your Minn Kota bow mount away safely and securely when not in use on your boat. It Suits the Quick release bracket above.

The Minn Kota Stabiliser is designed to reduce bounce on bow-mount trolling motors. It's equipped with a low profile base that allows the stabiliser to be easily folded down or removed when not in use. The pole can be cut down to suit the required height and it suits all RipTide, Ulterra, Terrova and PowerDrive bow mount engines.

The Talon Anchor System is designed to quickly and quietly stop and position your boat in depths down to 15ft – whether you’re fishing saltwater or freshwater, the Talon is the ultimate holding device for stealth fishing. Operating from the boat’s existing battery setup, the Talon vertically deploys its three stage telescopic spike with the wireless remote and without the fish-spooking noise of a traditional anchor. When not in use, the lightweight Talon can be taken off the boat thanks to its standard release bracket or folded away for garaging with the optional tilt bracket. It’s electro-mechanical, cable-driven design, is easy to install with minimal wiring & rigging. A wireless remote is supplied as standard and you can purchase the optional foot control. The Talon is available in 4 sizes with different colour combos for each one. Select  your desired model in the drop down menu to see options. Popular features include: Multiple Control Options: Control Talon from anywhere on the boat using your choice of options: Control Panel, Wireless Remote, Foot Switch, i-Pilot or i-Pilot Link Remote, Mobile App or right from the Humminbird fish finder. Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), and standard (normal anchoring). Built-in Work Light: Illuminate the boat transom any time of day — or night. Includes two colors (white and blue) and each has three brightness intensity settings. Indestructible Anchoring Spike: Strong and flexible composite anchor spike backed with a lifetime guarantee and the Vertical Deployment keeps the Talon out of the way of your fishing lines.

You may look at the picture and think these are a rip off but do yourself a favour and check them out online and watch the videos and you will appreciate that they are a really good piece of engineering and quite large. There is a universal version that bolts on to the side of the outboard jacking plate if your have one. Otherwise you get the Port or Starboard one. It will all make sense when you do some homework on the Minn Kota or BLA website.

The Minn Kota Talon tilt bracket is made from marine grade, anodized aluminum and accommodates for low clearance areas and boat storage. Features adjustable deck support for added stability while tilting.

Manual Deploy Terrova QUEST is here. No longer do you have to choose between a 24v or 36v motor as they are now one and the same. Just choose your shaft length and colour and then simply use a 24v or a 36v battery and you will get 90lbs of thrust from the 24v battery and 115lbs of thrust from the 36v battery. All engines now have a built-in heading sensor. Riptide Terrova QUEST is the hardest working first mate you’ll meet. One that doesn’t take breaks and doesn’t know the meaning of the term “day off”. With available shaft lengths up to 100”, Riptide Terrova QUEST comes ready to go where other trolling motors wont. The new QUEST series of dual 24/36 volt brushless trolling motors was designed for anglers who demand the best from their equipment – even in the harshest environments. With a reinforced motor and mount, more advanced GPS functionality than ever and even an eco mode to extend battery life, Terrova is ready to tackle the elements and feels right at home on bigger boats than ever before.

QUEST Series: These 24/36V dual-voltage brushless motors have been completely re-imagined from the ground up with updates to mounts, propellers, lift assist systems, drive motors and software – taking the world’s greatest trolling motors and redesigning them to outperform everything else on the water for years to come.

Allows mounting on lower unit of bow or transom-mount motors. Rugged, durable construction. Fits transducers of all major manufacturers.

RUNOUT MODEL, RUNOUT MODEL, RUNOUT MODEL. The ProMariner ProSport 20 Plus is the previous version of the 3 bank 20 Amp HD model above. It just doesn't have the LED indicator. 

The ProMariner ProSportHD 20 Plus operates on exactly the same technology as the ProSportHD 12 above except it is a 20Amp charger and is designed for triple battery setups. It also has the expanded LED display with a completion status gauge.

The ProMariner ProSportHD 20 operates on exactly the same technology as the ProSportHD 12 above except it is a 20Amp charger and is designed for twin battery setups.

The ProSportHD 12 Dual bank 12 Amp fixed charger is prewired for easy installation and is 100% waterproof and saltwater tested. Its exclusive microprocessor and software ensures that all of the available charging amperage is fully utilized to meet the unique demands of each onboard battery and charge it in the most efficient way. After the batteries are charged, the ProSport 12 monitors and maintains the charge only as needed—reducing its AC power consumption. Connection to shore power is made easy by the included 10A plug. The “System Check OK” and “Battery Bank Trouble” LED indicators are exclusive to the ProSport line and confirm the system is operating properly or help shorten any required time spent troubleshooting. Compatible with flooded and AGM batteries, this smart charger provides three charging modes plus a storage recondition mode which helps extend the life of your batteries. Because this charger is waterproof, it can be installed almost anywhere on the boat. All of these features come in a charger that is 40% lighter than conventional epoxy filled (potted) chargers.

The ProSport 6 Amp fixed charger is prewired for easy installation and is 100% waterproof and saltwater tested. Its exclusive microprocessor and software ensures that all of the available charging amperage is fully utilized to meet the unique demands of each onboard battery and charge it in the most efficient way. All ProSportHD Generation 4 Chargers boast a new tri-surface heatsink design. This new heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode. ProSportHD’s enhanced microprocessor and software provides new digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status. Designed for use in harsh environments with our industrial grade jacketed 1.8m DC and AC power cables which include new molded strain reliefs and wire splitters.