This is a true marine quality trumpet horn with 100% stainless steel exterior. Supplied complete with integral stainless mounting bracket on rear and shaft of horn. It has a 110 decibel sound rating. Dimensions are 390mm long by 100mm wide by 125mm high.
Another very common plug used in a lot of marine applications. It's surface mounted so all you have running through the dash or deck is a small hole for the 2 wires. It screws together so will not come apart in any condition and also has a screw on cap for when not in use.
Perfect for navigation lights this switch is 3 position. The first click turns your rear light on for when you are at rest and the 2nd turns both the rear light and port and starboard lights on for when you are underway. It is suitable for 12v and 24v applications. It has a brass body that fits a 3/8 hole.
Able to be mounted Horizontally or Vertically, these waterproof Switch Panels are quality CE certified and come in either 4 and 6 gang with a snap-on matt black facia and waterproof booted switches. They comes with 15amp blade type fuses which are behind a rubber sealed section to keep them water tight and the LED indicator lights turn red or green depending on if the switch is on or off. (As per picture) Suitable for 12 volt only. Height = 108mm, Width = 98mm for the 4 gang and the 6 gang is 152mm high by 98mm wide. Both have a depth of 75mm. Supplied with 30 assorted stick-on name labels.
Suitable for 12V-42V applications these breakers are what we use for all our Minn Kota installations. They are waterproof and resetable. Suitable for all marine applications including inside engine boxes.
The BEP Splashproof Switch Panels are a stylish and quality contoured, moulded plastic panel with a removable cover plate over the switches to conceal the screws. Each switch has a backlit LED Red or Green light so you can see at a glance if they are on or off. They are available with and without fuses (blade type) and both come standard with a 29 piece label set. Suitable for 12volt only. Height = 158mm, Width = 110mm with a 75mm intrusion.
Same top quality BEP Contour switch panel as above except it has 6 built in Positive Temperature Coefficient (PTC) resettable fuses. PTC fuses are solid state 9 amp resettable fuses where all you do is turn the particular switch off for 10 secs to reset. Comes standard with a 29 piece label set. Suitable for 12volt only. Height = 158mm, Width = 110mm with a 75mm intrusion.
This Contour BEP switch panel suits both 12volt and 24volt applications. They are an injection moulded plastic panel with modern contour styling with a switch tray featuring a Rubber mounting gasket and integral cover seal. They come in 2, 4 and 6 gang with or without fuses and then you can also choose between black or white. Both black and blue interchangeable contour wave trims are included and the panels can be mounted horizontally or vertically due to the unique label design that is readable from both angles. They have a Red LED indicator light to show when the switch is turned on. Dimensions are all 63mm wide with a 25mm intrusion and then the length is 71mm for the 2 gang, 119mm for the 4 and 167mm for the 6. All BEP Splashproof Switch Fuse Panels are supplied complete with a 28 piece label set.
« Previous Page 1 of 3 Next »