X
Sale

Hunts Fishing Shirts - 3 Styles in 7 Sizes

$39.95

SPECIAL INTRODUCTORY PRICE. These lightweight sublimation fishing shirts are fast drying and moisture wicking so they pull the moisture away from your skin and it then quickly evaporates. Made for 100% polyester and machine washable, they are also UPF 50+ to protect you from the harsh Australian sun. A must have if you are spending anytime on the water or in the sun. Available in 7 sizes of three awesome designs of Mackerel, Sunset and Flathead. Don't miss out! NOTE: There is a sizing chart attached. It's always best to order a slightly larger shirt if you are between two size ranges. Bigger is always better as looser and cooler.
Brand: Hunts Marine
SKU:
X

Roll Up Vinyl Australian Fish Ruler

$24.95

This is a must have for every boat. Made from hard wearing easy to clean PVC material, this Australian Fish ID Maxi Ruler is one of the longest on the market at 35cm wide and stretching to 150cm. This mat conveniently rolls up and is secured with a velcro strap for easy storage in the boat or tackle box. It also contains a good eating guide for each species as well as a dangerous listing and angling merit of each species.
Brand: Hunts Marine
SKU: AC6107
X

PVC Straight Rectangular Rod Holder

$4.50

Available in Black or White, PVC straight deck mount rod holder with rectangular flange. Flange size is approx 85mm by 55mm. The tube is 250mm long and has an inside diameter of 40mm.
Brand: Hunts Marine
SKU: 21171
X

PVC Angled Rectangular Rod Holder

$4.50

Available in Black or White, PVC 30 degree angled deck mount rod holder with rectangular flange. Flange size is approx 85mm by 55mm. The tube is 250mm long and has an inside diameter of 40mm.
Brand: Hunts Marine
SKU: 21173
X

PVC Angled Oval Rod Holder

$4.50

Available in Black or White, quality PVC 30 degree oval angled rod holder. Length is 240mm and inside diameter 40mm. Note: If you are after the Genuine QUINTREX black oval angled rod holder please see the Quintrex Genuine Accessories tab in the Accessories drop down menu.
Brand: Hunts Marine
SKU: 21175
X

PVC Side Mount Rod Holder

$10.00

Available in Black or White, designed for surface mounting and can be used on its own or in gangs of two or more on the boat or at home in the garage. Length is 235mm and inside diameter is 40mm.
Brand: Hunts Marine
SKU: 192592
X

Oval Stainless Steel Angled Rod Holder

$26.99

This is a very common pressed 304 grade stainless steel oval flush mounted 30 degree rod holder. Comes with cap and mounting gasket. Tube length approx 240mm.
Brand: Hunts Marine
SKU: W511
X

Angled Rectangular Stainless Steel Rod Holder

$42.00

Australian made quality 15 degree angled flush mounted rod holder with rectangular head. Perfect for downriggers, BBQ's and bait boards. Tube length is 220mm and outside diameter is 45mm.
Brand: Hunts Marine
SKU:
X

Straight Rectangular Stainless Steel Rod Holder

$55.00

Australian made quality straight flush mounted rod holder with rectangular head. Perfect for downriggers, BBQ's and bait boards. Tube length is 220mm and outside diameter is 45mm.
Brand: Hunts Marine
SKU: BM10011
X

Cast Stainless Steel Rod Holders - Straight and 30 Degree

$65.00

Available in 0 & 30 degrees these heavy duty cast 316 marine grade stainless steel game rated rod holders are fully welded, hand polished to a mirror finish and are strong enough to hold your most precious game rods. With heavy duty gimble pins and heavy wall thickness (1.5 x 48mm), the 0 degree version is ideal for your bent butt game rods. Come complete with a rubber cap to prevent unwanted water entry and a gimbal bar in the base to align the rod. They are supplied with the 4mm thick base gasket and also feature a rubber liner to protect fishing rods. Hole cutout is approx 55mm and length of tube is approx 210mm.
Brand: Hunts Marine
SKU: BM-10008
X

Stainless Steel Fully Adjustable Rod Holder Extension

$125.00

Made from 316 Stainless Steel, this is a popular heavy duty fully adjustable rod holder extension with a 42mm Inside diameter tube to take the rods. It rotates 360 degrees as well as vertically 180 degrees. The bottom tube size is OD42mm and the bottom and top tube lengths are 323mm to pivot point so 646mm overall.
Brand: Hunts Marine
SKU: FM99290
X

Stainless Adjustable Rail Mount Rod Holder - 22mm, 25mm and 32mm

$19.99

Made from 316 stainless, the rod holder pivots both left and right as well as up and down. It comes in 3 versions and can either suit 22mm, 25mm or 32mm rails.
Brand: Hunts Marine
SKU: FM99117
X

Stainless Clamp on Rod Holder - Multi Fit

$89.95

Adjustable in both rail size and rod angle, it's made from solid 316 grade mirror polished stainless steel and has a soft black PVC liner to protect rod and reel. The slotted barrel and multi-position articulation is designed for setting rods with overhead reels to the optimum fishing position. Also commonly used in multiples for rod storage racks for overhead and spinning reels.  Tube length is 245mm and the inside diameter of tube is 46mm. It is adjustable to suit rail sizes from 19mm to 25mm.
Brand: Hunts Marine
SKU: 192600
X

Heavy Duty Cast Stainless Clamp on Rod Holder

$59.99

The heavy duty cast holder is designed to accept and securely hold most common rods but also allows the rod to be quickly removed when fish strike. Each holder is mounted on a cast stainless steel base which is designed to be clamped around hand rails or rod racks manufactured from 25mm diameter tube. The heavy duty cast rod holder can be swivelled to best suit any desired rod angle. It rotates through 360 degrees in both the horizontal and vertical axis.
Brand: Hunts Marine
SKU: FM99138
X

Adjustable Swivel Mount Rod Holder

$19.95

This adjustable swivel rod holder pivots both left and right as well as up and down. Includes the side mounting base which fastens with 4 screws or bolts.
Brand: Hunts Marine
SKU:
X

Rail Mount Adaptor for Adjustable Rod Holder

$6.50

Use this rail mount adaptor for the adjustable rod holder above.
Brand: Hunts Marine
SKU: RWB2192
X

Railblaza Multi Directional Rod Holder with Surface Mount Base - Black

$53.00

The Railblaza rod holder with surface mount star base is perfect for spinning, bait casting, boat and fly reels. It turns a full 360 degrees and pivots 90 degrees vertically. The rotating collar helps prevent "strike-theft" and the rear gimbal lock reduces rod rotation. Remove the rod holder from its base and all you are left with is a slim line round base. No need to drill large holes through the deck, just needs 2 screws or 3/16" bolts.
Brand: Hunts Marine
SKU: RB04-4020-11
X

Railblaza Multi Directional Rod Holder with Surface Mount Base - White

$53.00

The Railblaza rod holder with surface mount star base is perfect for spinning, bait casting, boat and fly reels. It turns a full 360 degrees and pivots 90 degrees vertically. The rotating collar helps prevent "strike-theft" and the rear gimbal lock reduces rod rotation. Remove the rod holder from its base and all you are left with is a slim line round base. No need to drill large holes through the deck, just needs 2 screws or 3/16" bolts.
Brand: Hunts Marine
SKU: RB04-4020-21
X

Rowlock Mount Stainless Steel Rod Holders - Pair

$80.00

With a 10mm shaft diameter they fit any size of rowlock holder and are a great addition to any tinnie. The tube is 150mm long. They are made from 304 stainless and have plastic end caps so your rods and reels wont get harmed.
Brand: Hunts Marine
SKU: 7198
X

Single Stainless Steel Rod Holder

$29.99

Single stainless steel rod holder that fits into any 30 degree deck mount rod holder. Has a movable nylon tapered spacer for a secure fit and cross cut in the bottom to engage in any rod stop.
Brand: Hunts Marine
SKU: FM99131
X

3 Way Port or Starboard Stainless Steel Rod Holder

$39.95

Available in PORT and STARBOARD this 3 Way stainless steel rod holder fits into any 30 degree deck mount rod holder. Has a movable nylon tapered spacer for a secure fit and cross cut in the bottom to engage in any rod stop. (Note: The one on the left in the picture is of the STARBOARD rod holder as the straight rod holder is closest to your motor.)
Brand: Hunts Marine
SKU: 99080P
X

3 Way Port or Starboard Stainless Steel Rod Holder with 3 Way Joint

$99.95

Available in PORT and STARBOARD this 3 Way stainless steel rod holder with 3 Way Joint fits into any 30 degree deck mount rod holder. Has a movable nylon tapered spacer for a secure fit and cross cut in the bottom to engage in any rod stop. Made form 316 Stainless Steel.
Brand: Hunts Marine
SKU: 99111P
X

Railblaza Rod Rak 2 Rod Holder Storage System - Black or White

$33.95

Available in Black or White, the RodRak is an expandable fishing rod storage system for hanging your rods from any vertical or horizontal surface. This kit will hold two fishing rods on the shed or garage walls, under the cabin roof, inside the gunnel or any other place you can screw into. The hooks can be installed standalone, or joined together. If needed you can add a 4mm bungee cord (not supplied) as a retention band. Features soft flexible inserts to protect handle and tip while allowing fast and easy stowage or removal. Rod/pole handle size from 25mm to 38mm diameter.
Brand: Hunts Marine
SKU: RB09-0008-21
X

Horizontal 3 and 5 Rod storage Rack

$14.95

Used for storing rods in a horizontal position onboard or at home. Bases incorporate closed cell foam inserts to support rod stems. Black U.V. stabilised plastic frame. Sold as a pair. The 3 rod holder brackets are 195mm long, 73mm deep and 62mm wide. The 5 rod holder brackets are 290mm long, 62mm deep and 52mm wide.
Brand: Hunts Marine
SKU: