X

FixnZip Instant Replacement Zipper Slider - 2 Sizes

$19.95

This is a fantastic but simple product and is designed to instantly repair stuck zipper sliders without any sewing. Use it on boat canopies, apparel, bags, tents, sleeping bags and more. All you do is choose the correct size, cut the old slider off and follow the instructions fitting the new slider. The body is nickel and you can either use the split ring or the small cord and plastic handle. You choose the size by measuring the width of the zip when it is zipped together.
Brand: Hunts Marine
SKU:
X

Canopy Press Stud Kits - Set of 10

$12.00

Need to replace broken or missing canopy press studs? This kit includes 10 complete sets, so 40 pieces all up. Tip: After you have repaired or replaced what's needed go round them all and put a small smear of Vasaline into the canopy press stud base (or Stud). It will stop them sticking together with the dried salt.
Brand: Hunts Marine
SKU:
X

Canopy Tube Ends - 4 Types

$2.00

Canopy tube ends come in 2 sizes and also 2 colours so there are 4 to choose from. The smaller ends suit tube that has an outside diameter of approx 20mm and the larger ends suits tube that has an outside diameter of approx 25mm.
Brand: Hunts Marine
SKU:
X

Canopy Tube Clamps - 4 Types

$2.00

Canopy tube clamps come in 2 sizes and also 2 colours so there are 4 to choose from. The smaller clamps suit tube that has an outside diameter of approx 20mm and the larger clamps suits tube that has an outside diameter of approx 25mm.
Brand: Hunts Marine
SKU:
X

Canopy Deck Mounts - 2 Colours

$3.00

Canopy deck mounts come in black and white and are supplied with the stainless screw. They will suit both 20mm and 25mm tube ends.
Brand: Hunts Marine
SKU:
X

Canopy Thumb Screws - 2 Colours

$2.50

Canopy thumb screws to suit deck mounts and tube clamps.
Brand: Hunts Marine
SKU:
X

Canopy Strap Ends - 2 Colours

$1.50

Canopy strap ends come in black or white and are designed to hook on to the stud below.
Brand: Hunts Marine
SKU:
X

Canopy Studs - 2 Colours

$0.80

Canopy studs to suit the strap ends above.
Brand: Hunts Marine
SKU:
X

Canopy Rope/Ute Loop Hooks - 2 Colours

$1.50

Canopy rope or ute loop hooks in nylon. The screw holes are already countersunk.
Brand: Hunts Marine
SKU:
X

Canopy Attaching Ute Loops - 3 sizes

$3.00

Made from 5mm bungee cord these ute loops are designed to attach to a canopy and then fasten down over a canopy stud or ute loop hook. You just make a small hole in the canopy then use the white locking plug to fasten them on from the other side. Available in 3 sizes, the measurement is the overall length including the plastic base.
Brand: Hunts Marine
SKU:
X

Screw On Ute Loops - 3 sizes

$2.50

Made from 5mm bungee cord these ute loops are designed to attach with a screw or bolt and then fasten down over a canopy stud or ute loop hook. Available in 3 sizes, the measurement is the overall length including the plastic base.
Brand: Hunts Marine
SKU:
X

Nylon Stayput Fasteners - 4 Types

$1.00

Nylon Stayput fasteners are available in two different shaft lengths to either take one or two canopy eyelets and the toggles can either fold horizontally or vertically relative to the base. The toggle is nickle plated brass. (Note: They are only available in white but make sure you refer to 2nd picture to choose the correct one.)
Brand: Hunts Marine
SKU:
X

2 Bow Bimini

$155.00

All Bimini canopies are made from a 600 denier polyester fabric which combines strength and abrasion resistance whilst still being breathable and water repellent. The tube size is 25mm polished aluminium and they include all the fittings you will need for complete easy installation. The 2 bow bimini is suitable for open boats and colour choices are Navy and Beige. Please make a note which colour you would prefer when placing order.
 Code Canopy Width Canopy Length Mounting Width MA060-1 1.0m 1.6m 1.1m - 1.3m MA060-2 1.2m 1.6m 1.3m - 1.5m MA060-3 1.4m 1.6m 1.5m - 1.7m
Brand: Hunts Marine
SKU:
X

3 Bow Bimini

$240.00

The 3 bow bimini is suitable for open boats and runabouts and colour choices are Navy, Beige, Maroon, Grey and Black. Please make a note which colour you would prefer when placing order.
 Code Canopy Width Canopy Length Mounting Width MA062-1 1.4m 1.83m 1.5m - 1.7m MA062-2 1.6m 1.83m 1.7m - 1.9m MA062-3 1.8m 1.83m 1.9m - 2.1m
Brand: Hunts Marine
SKU:
X

4 Bow Bimini

$289.00

The 4 bow bimini is suitable for open boats, runabouts and centre comsoles and colour choices are Navy, Beige, Maroon, Grey and Black. Please make a note which colour you would prefer when placing order.
 Code Canopy Width Canopy Length Mounting Width MA063-1 1.4m 2.2m 1.5m - 1.7m MA063-2 1.6m 2.2m 1.7m - 1.9m MA063-3 1.8m 2.2m 1.9m - 2.1m MA063-4 2.0m 2.2m 2.1m - 2.3m
Brand: Hunts Marine
SKU:
X

Oceansouth Open Boat Cover

$95.00

All Oceansouth Covers are light grey in colour and are made from a 600 denier premium woven dope dyed polyester fabric which is breathable and water repellent. They are designed to be semi custom fit covers and are a perfect choice when you need something to store your boat from the sun, rain, leaves, dust and birds. They are not really designed for trailing at high speeds however can be towed provided they are fitted tightly and correctly as per instructions.
 Code Boat Length Max Beam Width Overall Fabric Length MA202-3 3.5m-3.7m 1.6m 4300mm MA202-4 3.7m-3.9m 1.7m 4500mm MA202-5 3.9m-4.1m 1.8m 4700mm MA202-6 4.1m-4.3m 1.95m 4900mm MA202-7 4.3m-4.5m 2.05m 5100mm MA202-8 4.5m-4.7m 2.05m 5300mm MA202-9 4.7m-5m 2.25m 5600mm MA202-10 5m-5.3m 2.25m 5900mm MA202-11 5.3m-5.6m 2.25m 6200mm
Brand: Hunts Marine
SKU:
X

Quintrex APEX and Fighter Hull Covers to suit TILLER STEER Explorers, Hornets and Frontiers 3.5m to 6.3m

$159.00

Made by OceanSouth, these covers are available in Black only and have been designed to suit the TILLER STEER Quintrex APEX and Fighter style bows of all the Explorers, Hornets and Frontiers from 3.5m to 6.3m. Made from a premium woven dope dyed 280g polyster fabric they are great to keep the leaves, dirt and rain out of your pride and joy. Strapped down properly they are also towable.
Brand: Hunts Marine
SKU:
X

Quintrex APEX and Fighter Hull Covers to suit SIDE CONSOLE Explorers, Hornets and Frontiers 3.5m to 6.3m

$214.00

Made by OceanSouth, these covers are available in Black only and have been designed to suit the SIDE CONSOLE (SC) Quintrex APEX and Fighter style bows of all the Explorers, Hornets and Frontiers from 3.5m to 6.3m. Made from a premium woven dope dyed 280g polyster fabric they are great to keep the leaves, dirt and rain out of your pride and joy. Strapped down properly they are also towable.
Brand: Hunts Marine
SKU:
X

Oceansouth Inflatable Boat Cover

$95.00

All Oceansouth Covers are light grey in colour and are made from a 600 denier premium woven dope dyed polyester fabric which is breathable and water repellent. They are designed to be semi custom fit covers and are a perfect choice when you need something to store your boat from the sun, rain, leaves, dust and birds. They are not really designed for trailing at high speeds however can be towed provided they are fitted tightly and correctly as per instructions.
 Code Boat Length Max Beam Width Overall Fabric Length MA601-1 2.3m-2.6m 1.5m 3280mm MA601-2 2.6m-2.9m 1.55m 3580mm MA601-3 2.9m-3.2m 1.65m 3930mm MA601-4 3.2m-3.6m 1.75m 4330mm MA601-5 3.6m-3.9m 1.9m 4650mm MA601-6 3.9m-4.3m 2.0m 5112mm MA601-7 4.3m-4.7m 2.1m 5510mm
Brand: Hunts Marine
SKU:
X

Oceansouth Runabout Boat Cover

$180.00

All Oceansouth Covers are light grey in colour and are made from a 600 denier premium woven dope dyed polyester fabric which is breathable and water repellent. They are designed to be semi custom fit covers and are a perfect choice when you need something to store your boat from the sun, rain, leaves, dust and birds. They are not really designed for trailing at high speeds however can be towed provided they are fitted tightly and correctly as per instructions.
 Code Boat Length Max Beam Width Overall Fabric Length MA203-6 4.1m-4.3m 1.95m 5020mm MA203-7 4.3m-4.5m 2.05m 5220mm MA203-8 4.5m-4.7m 2.05m 5420mm MA203-9 4.7m-5.0m 2.25m 5720mm MA203-10 5.0m-5.3m 2.40m 6020mm MA203-11 5.3m-5.6m 2.40m 6320mm MA203-12 5.6m-5.9m 2.45m 6620mm MA203-13 5.9m-6.3m 2.50m 7020mm MA203-14 6.3m-6.7m 2.50m 7420mm
Brand: Hunts Marine
SKU:
X

Oceansouth Side Console Cover

$170.00

All Oceansouth Covers are light grey in colour and are made from a 600 denier premium woven dope dyed polyester fabric which is breathable and water repellent. They are designed to be semi custom fit covers and are a perfect choice when you need something to store your boat from the sun, rain, leaves, dust and birds. They are not really designed for trailing at high speeds however can be towed provided they are fitted tightly and correctly as per instructions.
 Code Boat Length Max Beam Width Overall Fabric Length MA205-6 4.1m-4.3m 1.95m 4960mm MA205-7 4.3m-4.5m 2.05m 5110mm MA205-8 4.5m-4.7m 2.05m 5397mm MA205-9 4.7m-5.0m 2.25m 5697mm MA205-10 5.0m-5.3m 2.40m 5997mm MA205-11 5.3m-5.7m 2.40m 6297mm
Brand: Hunts Marine
SKU:
X

Oceansouth Centre Console Cover

$240.00

The Oceansouth Centre Console cover fits consoles up to 800mm high measured from the gunwale. All Oceansouth Covers are light grey in colour and are made from a 600 denier premium woven dope dyed polyester fabric which is breathable and water repellent. They are designed to be semi custom fit covers and are a perfect choice when you need something to store your boat from the sun, rain, leaves, dust and birds. They are not really designed for trailing at high speeds however can be towed provided they are fitted tightly and correctly as per instructions.
 Code Boat Length Max Beam Width Overall Fabric Length MA204-9 4.7m-5.0m 2.25m 5816mm MA204-10 5.0m-5.3m 2.40m 6115mm MA204-11 5.3m-5.6m 2.40m 6415mm MA204-12 5.6m-5.9m 2.45m 6715mm MA204-13 5.9m-6.3m 2.50m 7115mm MA204-14 6.3m-6.7m 2.50m 7515mm
Brand: Hunts Marine
SKU:
X

Oceansouth Bowrider Cover

$199.00

All Oceansouth Covers are light grey in colour and are made from a 600 denier premium woven dope dyed polyester fabric which is breathable and water repellent. They are designed to be semi custom fit covers and are a perfect choice when you need something to store your boat from the sun, rain, leaves, dust and birds. They are not really designed for trailing at high speeds however can be towed provided they are fitted tightly and correctly as per instructions.
 Code Boat Length Max Beam Width Overall Fabric Length MA200-9 4.7m-5.0m 2.25m 5660mm MA200-10 5.0m-5.3m 2.40m 5960mm MA200-11 5.3m-5.6m 2.40m 6300mm MA200-12 5.6m-5.9m 2.45m 6600mm MA200-13 5.9m-6.3m 2.50m 7040mm MA200-14 6.3m-6.7m 2.50m 7440mm
Brand: Hunts Marine
SKU:
X

Oceansouth Cabin Cruiser Cover

$240.00

Oceansouth Cabin Cruiser Covers suit windscreens or cabins up to 900mm high. All Oceansouth Covers are light grey in colour and are made from a 600 denier premium woven dope dyed polyester fabric which is breathable and water repellent. They are designed to be semi custom fit covers and are a perfect choice when you need something to store your boat from the sun, rain, leaves, dust and birds. They are not really designed for trailing at high speeds however can be towed provided they are fitted tightly and correctly as per instructions.
 Code Boat Length Max Beam Width Overall Fabric Length MA201-9 4.7m-5.0m 2.25m 5960mm MA201-10 5.0m-5.3m 2.40m 6350mm MA201-11 5.3m-5.6m 2.40m 6650mm MA201-12 5.6m-5.9m 2.45m 6950mm MA201-13 5.9m-6.3m 2.50m 7350mm MA201-14 6.3m-6.7m 2.50m 7750mm
Brand: Hunts Marine
SKU: