X
Ronstan Threaded Bung
$3
$3
The most popular threaded bung on the market. It has a flat edged thread.
Brand:
Hunts Marine
SKU: RF738
X
Ronstan Fine Threaded Bung
$3
$3
An older style popular bung that was used in a lot of boats. It has a fine pointed thread.
Brand:
Hunts Marine
SKU: RF293
X
Brass Screw in Boat Bung
$10
$10
Brass screw in bung to suit most American boat brands.
Brand:
Hunts Marine
SKU: 400367
X
Ronstan Threaded Bung with Plastic Housing
$4
$4
Flat edged popular screw in bung with plastic housing.
Brand:
Hunts Marine
SKU: RF294
X
Ronstan Threaded Bung with Chrome Brass Housing
$6
$6
Flat edged popular screw in bung with chrome brass housing.
Brand:
Hunts Marine
SKU:
X
Scupper Valve 70mm
$9.95
$9.95
Used on the rear of a lot of boats and on the sides of quite a few Quintrex models, it has a white polypropylene outer ring with a rubber flap that opens to let water out then seals to prevent water getting back in. It's supplied with the 4 stainless mounting screws. The outer diameter of the white ring is 70mm and the drain hole size is approx 40mm.
Brand:
Hunts Marine
SKU: RWB1431
X
Scupper Valve - Thru hull
$24.95
$24.95
Using the same outer scupper valve as above, it has a 75mm threaded shaft that then takes a 38mm hose so you can connect it up to a floor drain as per the picture. Also supplied with the 4 stainless mounting screws. The overall length is 157mm and the cut out hole size is 45mm.
Brand:
Hunts Marine
SKU: RWB1430
X
Fold Down Drink Holders
$8.50
$8.50
Available in White, Grey or Black these fold down drink holders with flip up adjustable arms will fit any boat or installation. Mounting dimensions are 100mm by 100mm and when folded up they only 25mm thick.
Brand:
Hunts Marine
SKU: RWB479
X
304 Grade Stainless Folding Drink Holder
$49.95
$49.95
Finally there is a really good solid top quality stainless steel folding drink holder. Made from 304 grade stainless it has spring loaded adjustable arms to grab and can or bottle size (48mm to 91mm) and has a foam coaster on the base on the inside so there is no vibration when the boat is underway. Its supplied with 2 mounting screws and when folded up the dimensions are 100mm by 105mm by 15mm.
Brand:
Hunts Marine
SKU: 37478
X
Small Recessed Drink Holder - Black or White
$12
$12
Available in Black or White these drink holders suit cans and smaller bottles. Cutout size is approx 70mm and then there is an 8mm lip. Depth is 75mm.
Brand:
Hunts Marine
SKU: W466
X
Large Recessed Drink Holder - Black or White
$10
$10
Available in Black or White these drink holders have 2 internal sizes to suit either a wine bottle or can snugly. Cutout size is approx 90mm and then there is an 8mm lip. Depth is 90mm. They have a small 1/4 inch drain fitting on the base so they can be plumbed out the sides or internally if required.
Brand:
Hunts Marine
SKU: RWB470
X
Small Recessed Drink Holder - Stainless Steel
$49.95
$49.95
This stainless steel recessed drink holder has an internal diameter of 70mm to suit all canned drinks and is 40mm deep.
Brand:
Hunts Marine
SKU: 194106
X
Large Recessed Drink Holder - Stainless Steel
$19.95
$19.95
This stainless steel drink holder has 2 internal sizes to suit either a wine bottle or can snugly. Cutout size is approx 90mm and then there is an 8mm lip. Depth is 90mm. They have a small 1/4 inch drain fitting on the base so they can be plumbed out the sides or internally if required.
Brand:
Hunts Marine
SKU: RWB467
X
Large Recessed Drink Holder with LED - Stainless Steel
$22.95
$22.95
This stainless steel drink holder with 3 blue LED lights inside has 2 internal sizes to suit either a wine bottle or can snugly. Cutout size is approx 90mm and then there is an 8mm lip. Depth is 90mm. They have a small 1/4 inch drain fitting on the base so they can be plumbed out the sides or internally if required.
Brand:
Hunts Marine
SKU: RWB471
X
Boat Caddy Organiser with Drink Holder
$34.95
$34.95
The Sea Pro Boat Caddy Organiser is the perfect storage solution for boats, kayaks, canoes, and other watercraft. It has been designed to maximize space, keep essential gear within reach, and maintain a clutter-free deck. It has been constructed from premium ABS plastic to ensure durability and long-lasting performance in marine environments. Mount it how you like with quality suction mounts for a quick fix or go permanent with stainless steel self-tapping screws. Stay organised, keep your essentials close, and have fun on the water with the Sea Pro Boat Caddy Organiser. Measures 300mm long by 110mm deep.
Brand:
Hunts Marine
SKU: AC1341
X
Black Standard Glove Box
$55
$55
One of the most common plastic glove boxes used in most open boats, runabouts and half cabins. It has a stylish front and is also lockable. Lid dimensions are 350mm wide and 135mm high and the box is 160mm deep.
Brand:
Hunts Marine
SKU: RWB650
X
Deluxe Glove Box - Black or White
$69.95
$69.95
Available in Black or White, this lockable glove box has an attractive textured finish and 2 inbuilt drink holders in the fold down lid. It's supplied with 6 stainless mounting screws. Lid dimensions are 340mm wide and 135mm high and the box is 153mm deep. Cutout size required is 300mm by 100mm.
Brand:
Hunts Marine
SKU: RWB652
X
Utility Storage Box with Waterproof Lid
$69.95
$69.95
White plastic flush mounted heavy duty glove/storage box with waterproof lid. Outer lid dimensions are 245mm wide and 120mm high and the depth of the box is 165mm.
Brand:
Hunts Marine
SKU: RWB5130
X
Waterproof Hatch and Storage Box
$47
$47
The Oceansouth Hatch Storage Box is a durable and practical storage solution purpose-built for marine environments. Constructed from UV-treated, marine-grade ABS plastic, it delivers strength, longevity, and reliable protection against the harsh effects of sun and saltwater. Water Tight Seal – Fitted with a ¼" wide rubber seal that keeps out moisture and water. Secure Hardware – Built with a stainless-steel clasp and locking handle for reliable closure and corrosion resistance. Reinforced Door – Features a checkered grip pattern to improve traction and prevent slipping when stepped on. When mounted on the floor, the door can support up to 100kgs. The overall outer dimensions of the front door and box depth is H374mm x W272mm x Deep 287mm.
Brand:
Hunts Marine
SKU: MA802-3
X
Waterproof Hatch with 3 Tackle Draws - Horizontal
$110
$110
Using the storage box above, this one holds 3 tackle boxes, each with clear hinged lids and adjustable compartments for ultimate organisation. The Oceansouth Hatch Storage Box is a durable and practical storage solution purpose-built for marine environments. Constructed from UV-treated, marine-grade ABS plastic, it delivers strength, longevity, and reliable protection against the harsh effects of sun and saltwater. Water Tight Seal – Fitted with a ¼" wide rubber seal that keeps out moisture and water. Secure Hardware – Built with a stainless-steel clasp and locking handle for reliable closure and corrosion resistance. Reinforced Door – Features a checkered grip pattern to improve traction and prevent slipping when stepped on. When mounted on the floor, the door can support up to 100kgs. The overall outer dimensions of the front door and box depth is H374mm x W272mm x Deep 287mm.
Brand:
Hunts Marine
SKU: MA802-2
X
Waterproof Hatch with 5 Tackle Draws - Vertical
$125
$125
Using the storage box above, this one holds 5 tackle boxes, each with clear hinged lids and adjustable compartments for ultimate organisation. The Oceansouth Hatch Storage Box is a durable and practical storage solution purpose-built for marine environments. Constructed from UV-treated, marine-grade ABS plastic, it delivers strength, longevity, and reliable protection against the harsh effects of sun and saltwater. Water Tight Seal – Fitted with a ¼" wide rubber seal that keeps out moisture and water. Secure Hardware – Built with a stainless-steel clasp and locking handle for reliable closure and corrosion resistance. Reinforced Door – Features a checkered grip pattern to improve traction and prevent slipping when stepped on. When mounted on the floor, the door can support up to 100kgs. The overall outer dimensions of the front door and box depth is H374mm x W272mm x Deep 287mm.
Brand:
Hunts Marine
SKU: MA802-1
X
5 Draw Tackle Storage Box
$199.95
$199.95
This is a popular option and is found in many boats. It is made from white polypropylene and has a clear watertight locking hatch. Each draw also has a clear locking lid. Outer dimensions are 364mm X 183mm and the cutout is 321mm X 140mm and requires 150mm depth. The draws are 130mm X 150mm X 50mm.
Brand:
Hunts Marine
SKU: 173082
X
Removable Oval Cockpit Table
$225
$225
There is no original Quintrex cockpit table as they just come from 3rd party suppliers but this is the most common one and the one we use in all our other boats. The tables are made from UV stabilised high impact plastic and the pedestals are silver anodised aluminium. The thread-lock pedestal system allows the table and pedestal pole to be quickly and easily removed from the base for storage. The thread lock also includes a ratchet lock mechanism for very steady and secure mounting. This is a really easy table to fit as the base only needs to be screwed down to the floor and you don't need to recess a big hole in the middle. The base only sits up about 15mm and is tapered on the sides so you cant kick your feet on it either. The base diameter is 180mm, the pole is 680mm high and the table top is 760mm long by 460mm wide.
Brand:
Quintrex
SKU: RWB4903
X
Removable Rectangular Cockpit Table with Cup Holders
$225
$225
Same pole and base as above except the table is rectangular and has 4 inbuilt cup holders. Table dimensions are the same at 760mm by 460mm.
Brand:
Quintrex
SKU: RWB4913
