X

2 Piece Outboard Hydrofoil to suit up to 50hp

$21.00

This 2 piece hydrofoil suits most outboards 8hp to 50hp. Includes stainless mounting bolt, nuts and washers. Helps eliminate cavitation and porpoising, improves stability and provides maximum lift by forcing the stern up and keeping the bow down.
Brand: Hunts Marine
SKU:
X

Adaptor for Salt Engine Flush

$21.00

This adaptor for the Salt Engine Flush above comes with a 100ml capacity canister as well as the inlet and outlet hose fittings. Just add 50ml to 100ml of the Salt Flush, connect the hose and start flushing your engine. The dial on top lets you turn the ratio up and down depending on how long you want to flush your engine for.
Brand: Hunts Marine
SKU: HMEF
X

Biodegradable Engine Degreaser 750ml

$9.00

This environmentally friendly biodegradable engine degreaser is non-toxic and removes grease, oil and grime. Coming in a 750ml trigger bottle it is ideal for outboards, workshop applications and general use. It dissolves and removes grease, oils, lubricants and contaminants from engines, gensets, metal and fibreglass. Its effective on winches, chains, trailer brakes cables and bearings as well as BBQ's grills, drives and pathways.
Brand: Hunts Marine
SKU: HMD750
X

Brass Evinrude/Johnson Tank fitting

$7.00

Brass screw in tank fitting to suit Evinrude/Johnson fuel connectors.
Brand: Hunts Marine
SKU:
X

Brass Yamaha/Mercury Tank fitting

$7.00

Brass screw in tank fitting to suit Yamaha/Mercury fuel connectors.
Brand: Hunts Marine
SKU:
X

Cork Ball Key Float

$6.00

A must for every boater. The cork ball is 2" diameter so it will float a good bunch of keys. The rope is about 3 inches long and the split ring is stainless steel. Add one to your cart now.
Brand: Hunts Marine
SKU: W515
X

Double Action Universal Engine Flusher

$21.00

The Easterner Universal Dual Flow Motor Flusher works on almost all outboard and sterndrive legs and provides maximum water flow into both intakes. It is supplied with the standard clip on garden fitting so just slide the ear muffs over the water intakes of the motor, turn the water on and you're good to go. Rectangle ear muff sizes. 130mm long, 80mm wide.
Brand: Hunts Marine
SKU: W4002
X

Easterner 11L Universal Fuel Tank

$37.00

The Easterner 23L fuel tank suits any brand of motor as all you need to do is just purchase the appropriate fuel connector to screw into the tank pickup. Dimensions of the tank are 35cm X 25cm X 23cm.
Brand: Hunts Marine
SKU: 351300
X

Easterner 23L Universal Fuel Tank

$54.00

The Easterner 23L fuel tank suits any brand of motor as all you need to do is just purchase the appropriate fuel connector to screw into the tank pickup. Dimensions of the tank are 58cm X 29cm X 23cm.
Brand: Hunts Marine
SKU: 351305
X

Easterner Complete Fuel Filter Kit

$61.00

This Easterner aftermarket fuel filter/water separator kit is fantastic value. It comes complete with the alloy head with 4 inlet/outlets, 2 blanking plugs and 2 3/8th tails with hose clamps, the filter and the reusable clear bowl with drain.
Brand: Hunts Marine
SKU: W5340
X

Easterner Replacement Fuel Filter

$21.00

This Easterner replacement fuel filter for kit above.
Brand: Hunts Marine
SKU: W5342
X

Easterner Universal Gear Lube Pump #261000

$17.00

This universal gear lube pump fits both 946ml (quart) and 3.78Ltr (gallon) bottles and has adaptors to fit every brand of outboard and sterndrive gearboxes.
Brand: Hunts Marine
SKU:
X

Generic Evinrude/Johnson Fuel Connector

$6.00

Generic 5/16 or 8mm Evinrude and Johnson fuel connector.
Brand: Hunts Marine
SKU: W4683
X

Generic Evinrude/Johnson Fuel Line Assembly

$27.00

Made from grey PVC 8mm x 2.1m UV and petrol resistant fuel hose with standard primer bulb and clamps. Suits all Evinrude and Johnson outboard up to and including V4. Anything larger hp than that needs to run the 10mm universal line and will should be connected directly to the underfloor tank and engine to allow for greater fuel flow.
Brand: Hunts Marine
SKU: RWB4697
X

Generic Primer Bulb - 8mm or 10mm

$7.00

This generic primer bulb is available in 2 sizes and is a good replacement for original ones. Suits 8mm or 5/16 inch hose or 10mm 3/8 inch hose.
Brand: Hunts Marine
SKU:
X

Generic Yamaha/Mercury Fuel Connector

$6.00

Generic 5/16 or 8mm Yamaha and Mercury fuel connector.
Brand: Hunts Marine
SKU:
X

Generic Yamaha/Mercury Style Fuel Line Assembly

$27.00

Compatible with all Yamaha motors from any year and Mariner and Mercury motors 1989-1998. Made from grey PVC 8mm x 2.1m UV and petrol resistant fuel hose with standard primer bulb and clamps. Suits all engines up to and including V4. Anything larger hp than that needs to run the 10mm universal line and will should be connected directly to the underfloor tank and engine to allow for greater fuel flow. 
Brand: Hunts Marine
SKU: RWB4698
X

Jiggler Fuel Siphon

$16.00

The jiggler fuel siphon provides a simple and easy way to siphon many types of liquids including fuel. Simply start the flow of liquid by jiggling the brass end up and down in the vertical position in the liquid. Inside diameter is 1/2 inch and the hose is 1.75m long.
Brand: Hunts Marine
SKU: RWB5681
X

Mixer Unit

$41.00

The hose adaptor suits almost all hose fittings and has a dispenser attached that you fill with Saltaway or Salt Attack fluid. Use it for flushing your outboard engine, washing the boat, caravan, 4 wheel drive or even the house where salt mist is an issue. The mixer will automatically dispense the fluid at a 500:1 ratio.
Brand: Hunts Marine
SKU: ASAM
X

Outboard Backing Plate or Transom Board

$21.00

This outboard backing plate, or transom board, is what we use in the workshop for all our installations. It's made from solid 8mm thick UV polypropylene and has smooth rounded outer edges for a professional finish. The top is 390mm wide, the bottom is 350mm and the height is 330mm.
Brand: Hunts Marine
SKU: L100134
X

Outboard Hydraulic Steering Lock

$24.00

A simple but great product that stops your outboard, fitted with hydraulic steering, flopping from side to side when on the road. It's made from heavy duty nylon that wont scratch anything and can be cut down to suit if needed. It fits 15mm and 19mm shafts which is pretty much any brand of hydraulic steering. Just remember to take them out when you put your boat in the water.
Brand: Hunts Marine
SKU: 84284
X

Outboard Motor support Bracket

$37.00

The "MOTO FLEX" deluxe support bracket for outboards suits motors up to 150HP and supports the motor leg while towing to take the weight of the hydraulics. It's adjustable from 510mm to 770mm and made from heavy gauge plated steel tubing with a shock absorbing spring steel coil. The "U" end hooks over the trailer chassis or real roller and the padded "V" end supports the motor leg. Supplied complete with rubber securing strap with end hooks.
Brand: Hunts Marine
SKU: RWB616
X

Outboard Motor Trolley

$67.00

Rated to 50kg this is the main trolley that we sell pallet loads of in our accessories department and the one we use in our service department. It will suit a 2 stroke up to about 20hp and a 4 stroke up to about 15hp. It has a plated steel frame with plastic end caps on all tube ends and soft rubber hand grips. It has 150mm diameter plastic wheels. Supplied in kit form which is quick and simple to assemble.
Brand: Hunts Marine
SKU: W3875
X

Outboard Wedges - 3 or 5 degree angle

$54.00

Sold as a pair, they are made from white epoxy coated aluminium alloy and are used to adjust the mounting angle of the outboard motor for increased performance. There are 2 angles available being 3 degree and 5 degree and the dimensions are 285mm by 95mm.
Brand: Hunts Marine
SKU: RWB3666