X
Single Swivel Steering Pulley
$28.95
$28.95
This swivel mounted steering pulley has a stainless steel bracket with a polyethylene wheel and can handle up to 5mm diameter wire. Note to be used for high performance or racing applications.
Brand:
Hunts Marine
SKU: RF154
X
Stainless Steel Five Spoke Steering Wheel - 2 Sizes
$185
$185
All stainless construction, tubular spokes and finger grip detents. Fitted standard with a swivel knob for easy, fast wheel turning. It's available in 340mm or 393mm diameter and the offset is 60mm to the back of the grip from the dash and 90mm to the front of the grip for the 340mm and 69mm and 96mm for the 393mm. The cast alloy hub will suit any 3/4 inch tapered shaft.
Brand:
Hunts Marine
SKU: RWB670
X
Stainless Steel Five Spoke Steering Wheel - 4 Sizes
$119
$119
Top quality dished stainless steel wheel with a screwed and welded hub. It's available in 387mm, 457mm, 510mm and 557mm diameter and the offset is 77mm to the back of the grip from the dash and 104mm to the front of the grip for the 387mm, 93mm and 118mm for the 457mm, 45mm and 68mm for the 510mm and 112mm and 137mm for the 557mm. The cast alloy hub will suit any 3/4 inch tapered shaft.
Brand:
Hunts Marine
SKU:
X
Stainless Steel Three Spoke Steering Wheel - 2 Sizes
$265
$265
All stainless construction, solid stainless spokes and finger grip detents. Fitted standard with a swivel knob for easy, fast wheel turning. It's available in 340mm or 393mm diameter and the offset is 60mm to the back of the grip from the dash and 90mm to the front of the grip for the 340mm and 69mm and 96mm for the 393mm. The cast alloy hub will suit any 3/4 inch tapered shaft.
Brand:
Hunts Marine
SKU: 62098
X
STANDARD Tilt helm assembly
$542
$542
Tilt steering is an option that allows the wheel to be pivoted through a 48° arc in 5 increments (42° up 6° down). Tilt helms have modified shafts and are for use with tilt mechanisms only. Helm and mechanism is required and are sold as a kit. Accepts the Quick Connect cable. All dimensions are in the last picture.
Brand:
Hunts Marine
SKU: 280142and280144
X
Steering Bezel 90 Degree to suit NON Feedback helm
$29.95
$29.95
This bezel suits the 280250 NON feedback helm above and sits 90 degrees to the dash. Its 130mm diameter and is 5cm deep. It comes with all the mounting hardware and the dimensions of the screw mounting centres is on the last picture.
Brand:
Hunts Marine
SKU: 280150
X
Steering Bezel 90 Degree to suit STANDARD helm
$29.95
$29.95
This bezel suits the 280132 helm above and sits 90 degrees to the dash. Its 130mm diameter and is 5cm deep. It comes with all the mounting hardware and the dimensions of the screw mounting centres is on the last picture.
Brand:
Hunts Marine
SKU: 280154
X
Steering Pulley Spring
$19.95
$19.95
This is the tension spring that is used on older style cable and pulley steering systems.
Brand:
Hunts Marine
SKU: 166662
X
Steering Wheel Speed Control Knob - 2 Styles
$34.95
$34.95
Available as either a clamp on or bolt on version, made from 316 grade stainless steel, these steering swivel can be used on both hydraulic and normal mechanical steering systems and alloys for faster and easier steering control at the wheel. They fit steering wheel rim size 20mm to 25mm (3/4 to 1 inch) diameter and the swivel protrudes approx 50mm from the wheel.
Brand:
Hunts Marine
SKU: 62124
X
Sold Out
Ultraflex UC128-1 Hydraulic Cylinder Front Mount - 2 Only
$1,017
$270
$1,017
$270
A lot of brand new outboards these days have inbuilt hydraulic steering so on all our new boat fit-ups, whilst we use the helm and lines that come in the new boat, we end up with a lot of left over brand new bullshorn rams. If you do your homework you will see its cheaper to buy one of our leftover rams than even putting a seal kit in your existing old one.
The UC128/1 front mount cylinder is recommended for use with outboard engines up to 300hp. It will fit most engines including Yamaha, Evinrude, Honda, Johnson, Mercury, Mariner, Suzuki and Tohatsu. You will need to do your own homework however. This is the standard UC128/1 cylinder that is used on the very common Ultraflex HyTech 300hp Hydraulic Steering Kit. This one comes with the common flat linking arm however if yours is slightly bent or offset you can just re-use it.
The UC128/1 front mount cylinder is recommended for use with outboard engines up to 300hp. It will fit most engines including Yamaha, Evinrude, Honda, Johnson, Mercury, Mariner, Suzuki and Tohatsu. You will need to do your own homework however. This is the standard UC128/1 cylinder that is used on the very common Ultraflex HyTech 300hp Hydraulic Steering Kit. This one comes with the common flat linking arm however if yours is slightly bent or offset you can just re-use it.
Brand:
Hunts Marine
SKU:
This product is sold out
X
Sale
Ultraflex UC95-OBF1 Hydraulic Cylinder Front Mount - 3 Only
$988
$260
$988
$260
A lot of brand new outboards these days have inbuilt hydraulic steering so on all our new boat fit-ups, whilst we use the helm and lines that come in the new boat, we end up with a lot of left over brand new bullshorn rams. If you do your homework you will see its cheaper to buy one of our leftover rams than even putting a seal kit in your existing old one.
The UC95-OBF1 front mount cylinder is recommended for use with outboard engines up to 175hp total and where the boat speed does not exceed 80 kph. It will fit most engines including Yamaha, Evinrude, Honda, Johnson, Mercury, Mariner, Suzuki and Tohatsu. You will need to do your own homework however. This is the standard OBF1 cylinder that is used on the very common Ultraflex HyTech 175hp Hydraulic Steering Kit. This one comes with the common flat linking arm however if yours is slightly bent or offset you can just re-use it.
The UC95-OBF1 front mount cylinder is recommended for use with outboard engines up to 175hp total and where the boat speed does not exceed 80 kph. It will fit most engines including Yamaha, Evinrude, Honda, Johnson, Mercury, Mariner, Suzuki and Tohatsu. You will need to do your own homework however. This is the standard OBF1 cylinder that is used on the very common Ultraflex HyTech 175hp Hydraulic Steering Kit. This one comes with the common flat linking arm however if yours is slightly bent or offset you can just re-use it.
Brand:
Hunts Marine
SKU: UltraflexUC95-OBF1
