Products

12" Black Concave Keel Roller with 25mm Bore

$29.95

12" Black Concave Keel Roller with 25mm Bore

$29.95

All the BLACK trailer rollers are made from a soft but durable rubber and are designed for fibreglass boats.

Brand: Hunts Marine

SKU: 91232

12" Black Flat Roller with 25mm Bore

$18.95

12" Black Flat Roller with 25mm Bore

$18.95

All the BLACK trailer rollers are made from a soft but durable rubber and are designed for fibreglass boats.

Brand: Hunts Marine

SKU: HUNTS11066

3" Black Bow Roller with 17mm Bore

$5

All the BLACK trailer rollers are made from a soft but durable rubber and are designed for fibreglass boats.

Brand: Hunts Marine

SKU: 91210

3" Blue Bow Roller with 17mm Bore

$10

3" Blue Bow Roller with 17mm Bore

$10

All the BLUE trailer rollers are made from a hard poly material and are designed for aluminium boats. If they are used on fibreglass boats there is a chance they can crack the gelcoat. Use the softer black rubber or non-marking red rubber rollers for fibreglass boats.

Brand: Hunts Marine

SKU: HUNTS11066

3" Ribbed Wobble rollers - 3 colours in 2 different bore sizes

$6.95

3" Ribbed Wobble rollers - 3 colours in 2 different bore sizes

$6.95

Made from non-marking UV stabilised soft polyurethane, the Ribbed wobble rollers are available in three colours and in either a 20mm bore or a 26mm Bore. They are 3" in diameter and approx 70mm deep.

Brand: Hunts Marine

SKU: 91102

Type:

4 1/2" Black Flat Roller with 17mm Bore

$7.50

4 1/2" Black Flat Roller with 17mm Bore

$7.50

All the BLACK trailer rollers are made from a soft but durable rubber and are designed for fibreglass boats.

Brand: Hunts Marine

SKU: HUNTS11066

4 1/2" Black Keel Roller with 17mm Bore - Wide Middle

$9.95

4 1/2" Black Keel Roller with 17mm Bore - Wide Middle

$9.95

All the BLACK trailer rollers are made from a soft but durable rubber and are designed for fibreglass boats.

Brand: Hunts Marine

SKU: 91212

4 1/2" Blue Keel Roller with 17mm Bore

$14.95

4 1/2" Blue Keel Roller with 17mm Bore

$14.95

Brand: Hunts Marine

SKU: 91312

4" Black Keel Roller with 17mm Bore

$6

All the BLACK trailer rollers are made from a soft but durable rubber and are designed for fibreglass boats.

Brand: Hunts Marine

SKU: 91211

4" Blue Keel Roller with 17mm Bore

$10.50

4" Blue Keel Roller with 17mm Bore

$10.50

Brand: Hunts Marine

SKU: 91311

4" Ribbed Cone Blue Wobble roller with 21mm bore

$19.95

4" Ribbed Cone Blue Wobble roller with 21mm bore

$19.95

Made from non-marking UV stabilised soft polyurethane, this cone shaped wobble roller is a popular replacement for existing worn out wobble rollers. It looks smart and provides maximum protection from the metal bracket. Its 4" in diameter and takes a 21 or 22mm pin. Overall length is 5 1/2".

Brand: Hunts Marine

SKU: WR4DBLUE-R

4" Smooth Wobble rollers - 2 colours in 2 different bore sizes

$6.95

4" Smooth Wobble rollers - 2 colours in 2 different bore sizes

$6.95

Made from non-marking UV stabilised soft polyurethane, the Smooth wobble rollers are available in two colours and in either a 20mm bore or a 26mm Bore. They are 4" in diameter and approx 90mm deep.

Brand: Hunts Marine

SKU: 91112

Type:

450mm Flipper Guide Kit - Pair

$135

450mm Flipper Guide Kit - Pair

$135

If you have a trailer with just the cotton reel roller at the rear and your sick of having trouble lining it up with the keel then this is a must. It comes as a pair and suits any trailer that has 50mm by 50mm (2 inch by 2 inch) cross member. It's super easy to fit but make sure you line up the end of the blue skid so it overhangs the keel roller by about 5mm to 10mm so the keel of your boat cannot go anywhere but to the centre of the roller. Note: You don't adjust the skids up to touch the bottom of the boat, they are there to slip the keel down onto the keel roller and are not designed to take any of the boat weight. Also when drilling the pivoting bolt through the skid make the inner length longer than the outer length (like in the picture) so the skids always flop towards and slightly on top of the keel roller. IF YOU DRILL EXACTLY IN THE MIDDLE THEN WHEN IMERSED IN THE WATER THE SKID CAN FLOP OUTWARDS.

Brand: Quintrex

SKU: A_SK450

450mm Gluider Guide Kit - Pair

$199.95

450mm Gluider Guide Kit - Pair

$199.95

This is the exact same product as the flipper kit above except it comes with a 2nd set of longer arms so that you can have it at a fixed angle. It comes as a pair and suits any trailer that has 50mm by 50mm (2 inch by 2 inch) cross members. It's super easy to fit but make sure you line up the end of the blue skid so it overhangs the keel roller by about 5mm to 10mm so the keel of your boat cannot go anywhere but to the centre of the roller. Note: You don't adjust the skids up to touch the bottom of the boat, they are there to slip the keel down onto the keel roller and are not designed to take any of the boat weight.

Brand: Quintrex

SKU: A_SK450GK

5" Ribbed Blue Wobble roller with 26mm bore

$19.95

5" Ribbed Blue Wobble roller with 26mm bore

$19.95

Made from non-marking UV stabilised soft polyurethane, the 5" diameter roller with plastic reinforced bore is engineered for smooth, damage-free launching and loading of fibreglass and aluminium hulls. The ribbed TPE construction offers superior traction and flexibility, supporting approximately 40% of hull weight with minimal wear. Depth is 70mm

Brand: Hunts Marine

SKU: 91118

500mm C Section Plastic Skid

$16.50

500mm C Section Plastic Skid

$16.50

This heavy duty C section blue skid fits on the rear trailer guides. It is approx 500mm long and is riveted into place (rivets not supplied). The internal dimensions of the C section are approx 45mm wide and 15mm deep either side. It is supplied as one only so if you need to do both then make sure you order 2.

Brand: Quintrex

SKU: 565308