Galley and Cabin
$8.90 freight Australia wide (Excludes heavy or bulky items and delivery to remote areas). All orders ship in 1 to 3 days and we will contact you if items are on back-order and are going to be longer.
X
4 inch Inspection Port with Recessed Lid - Black
$19.95
New Zealand made quality 4" Nairn inspection port with recessed lid with 4 finger grips.
Brand:
Hunts Marine
SKU: W4100
X
4 inch Inspection Port with Recessed Lid - Clear with Black or White Surround
$18.95
New Zealand made quality 4" Nairn inspection port with recessed lid with 4 finger grips. Available with Black or White surround.
Brand:
Hunts Marine
SKU:
X
5 inch Inspection Ports - Black, White or Clear
$18.95
New Zealand made quality 5" Nairn inspection port with flush lid with 2 finger grips. available in all white, all black, clear lid with white surround or clear lid with black surround.
Brand:
Hunts Marine
SKU:
X
6 inch Inspection Ports - Black, White or Clear
$24.95
New Zealand made quality 6" Nairn inspection port with flush lid with 2 finger grips. available in all white, all black, clear lid with white surround or clear lid with black surround.
Brand:
Hunts Marine
SKU: RWB4113
X
Rectangular Elastic Net Holder - 2 Sizes
$29.95
With a plastic surround that's easily mounted with 5 screws and an elastic net in between this is great for storing mobile phones, sunglasses etc. Dimensions are 180mm by 375mm wide for the smaller one and 210mm by 415mm for the larger one.
Brand:
Hunts Marine
SKU: RWB5373
X
Barwig Singlet Faucet with Built in Switch
$39.95
Rated up to 35PSI this is a popular single adjustable faucet which is used on most boats. It has an in-built switch in the tap. Just turn the top and your good to go.
Brand:
Hunts Marine
SKU: 005953
X
White Plastic On/Off Shower Head
$15.50
This is a very common shower head on/off nozzle and is used on a lot of trailer boats including the Whittley models we sell. Fits the hoses and housings below.
Brand:
Hunts Marine
SKU:
X
White Plastic On/Off Adjustable Shower Head
$24.95
This is another very common shower head on/off nozzle. It has a round shower rose that is adjustable for the required water flow. Fits the hoses and housings below.
Brand:
Hunts Marine
SKU: RWB2268
X
Recessed Shower Container to Suit Shower Heads
$29.95
This recessed shower container will suit both the round and sqare headed shower nozzles above. It comes with the base gasket to seal the unit to the hull and also has a waterproof opening lid with O ring.
Brand:
Hunts Marine
SKU:
X
Reinforced Shower Hose - 2 Lengths
$22.00
Reinforced 3/8th shower hose line to suit shower nozzles above. The other end will thread on to most of the common pressure pumps. Available in the 2 lengths of 3m and 5m.
Brand:
Hunts Marine
SKU: RWB2269
X
Genuine Seabird Air vent
$17.95
One of the most common air vents on the market. Made from UV stabilised plastic the outer base dimensions are roughly 190mm by 150mm and the offset raised 70mm diameter air hole in the inner plate prevents any water entry into the boats cabin that may enter the vent.
Brand:
Hunts Marine
SKU: RWB125
X
90mm Flush Air Vent - Black or White
$5.00
90mm white plastic square air vent suitable for a number of different applications.
Brand:
Hunts Marine
SKU: RWB1668
X
85mm Flush Air vent with 75mm Tail - Black or White
$9.00
85mm plastic square air vent available in either black or white with a 75mm tail to suit bilge blower hose.
Brand:
Hunts Marine
SKU: RWB1665
X
Stainless Steel Louvre Vents - 4 Sizes
$5.90
Made from polished 304 grade pressed stainless steel, all 4 stainless louvre vents are pre-drilled for 4mm fastenings. Dimensions of all 4 are in the main picture.
Brand:
Hunts Marine
SKU: RWB504
X
Large Stainless Steel 3 or 5 Louvre Vent
$21.50
Made from polished 304 grade stainless they have raised "V" style louvres and are ideal for engine room venting. The 3 louvre air vent has outer dimensions are 210mm by 113mm with a cut-out of 187mm by 90mm and the 5 louvre vent has outer dimensions of 325mm by 113mm with a cut-out of 303mm by 90mm.
Brand:
Hunts Marine
SKU: RWB500
X
Ventilation Hatch
$249.00
Manufactured from ASA plastic for strength and UV resistance, they are ideal for ventilation of the cabin, galley or bathroom areas. White satin finish exterior with smoked (tinted) acrylic lens, the hatch comes with a trim ring, neoprene gasket seal, one stay with stainless steel shaft and one opening handle. Made in Italy, its low profile at only 22mm above deck. The outside dimensions are 448mm by 268mm and the inside opening size is 376mm by 196mm.
Brand:
Hunts Marine
SKU: RWB5220
X
Low Profile Aluminium Hatches - 5 sizes with Silver Frame
$349.00
These sleek low profile hatches are designed for use on all boats from powerboats, sailboats and large yachts. With a 25mm profile above the deck and as low as 19mm if counter sunk in teak decks, the sleek minimalist lines add style to any vessel. With smoked acrylic glass and an anodised aluminium frame they utilise a unique heavy-duty anodised aluminium frame. The larger escape hatches are designed with two struts and two twist locks and the smaller ventilation hatches use one strut and one locking lever. Each strut comes standard with a twist lock brace to hold the lid in any position up to 95 degrees. A quick release pin enables the struts to be detached from the frame, allowing the hatch to open to a full 180 degrees.
Brand:
Hunts Marine
SKU: 36186
X
Low Profile Aluminium Hatches - 4 sizes with Black Frame
$332.00
The same top quality hatch as above except with a powder coated black frame. These sleek low profile hatches are designed for use on all boats from powerboats, sailboats and large yachts. With a 25mm profile above the deck and as low as 19mm if counter sunk in teak decks, the sleek minimalist lines add style to any vessel. With smoked acrylic glass they utilise a unique heavy-duty anodised aluminium frame. The larger escape hatches are designed with two struts and two twist locks and the smaller ventilation hatches use one strut and one locking lever. Each strut comes standard with a twist lock brace to hold the lid in any position up to 95 degrees. A quick release pin enables the struts to be detached from the frame, allowing the hatch to open to a full 180 degrees.
Brand:
Hunts Marine
SKU: 362006
X
Aluminium Hatch Screens to suit above
$97.00
These trim and fly screens fit perfectly in the appropriate hatch and are an absolute must if you are going to be overnighting and want to leave the hatch open to get some fresh air. You will get eaten alive by mossies otherwise. Use the chart in the other picture to make sure you get the correct one.
Brand:
Hunts Marine
SKU: 36193
X
19mm Stainless Hand Rails - 4 Sizes
$19.00
Available in 4 lengths from 229mm to 610mm these Stainless Steel Handrails are made from 316 grade mirror finish 19mm diameter stainless steel tubing. Each end has a Marine-grade nylon base and they come with the mounting stainless bolts, nuts and washers.
Brand:
Hunts Marine
SKU: MA019-9
X
22mm Stainless Hand Rails - 4 Sizes
$19.00
Available in 4 lengths from 229mm to 610mm these Stainless Steel Handrails are made from 316 grade mirror finish 22mm diameter stainless steel tubing. Each end has a Marine-grade nylon base and they come with the mounting stainless bolts, nuts and washers.
Brand:
Hunts Marine
SKU: MA022-09
X
25mm Stainless Hand Rails - 5 Sizes
$20.20
Available in 5 lengths from 229mm to 762mm these Stainless Steel Handrails are made from 316 grade mirror finish 25mm diameter stainless steel tubing. Each end has a Marine-grade nylon base and they come with the mounting stainless bolts, nuts and washers.
Brand:
Hunts Marine
SKU: MA025-9
X
25mm Wave Pattern Grip Stainless Hand Rails - 5 Sizes
$42.50
Available in 5 lengths from 260mm to 655mm these Stainless Steel Handrails with wave pattern grip are made from 304 grade mirror finish 25mm diameter stainless steel tubing. The studs are 45mm long with 5/16" thread welded into the hand rail base. All handrails are 60mm in height above the deck. Supplied with locking nuts.
Brand:
Hunts Marine
SKU: RWB1112
X
Handle - Cast Stainless
$21.95
This solid heavy duty cast stainless handle is made from 316 grade stainless steel. It's 145mm long and 43mm high and has 4 by 5mm countersunk fastening holes
Brand:
Hunts Marine
SKU: RWB2226
