Miscellaneous

The Gerber Suspension Multi Tool has everything housed in a single tool, including scissors, saw, wire cutter, screw driver, bottle opener, pliers and a bottle opener, plus much more! This multi-tool also includes both a fine edge and a serrated edge so you have the versatility of two knife types. The serrated edge is great for cutting ropes and other tough materials, while the plain edge is better for clean 'push' cuts, so you have a knife that can be used in a number of situations. The open frame single knife with a serrated locking blade that is lightweight, easy to clean and opens effortlessly. Features smooth heavy duty stainless steel handle and a clip for secure belt attachment. Gerber tools are backed by their genuine lifetime warranty.

Lemen have released a range of padlocks that are 99% Stainless Steel. These long shank ones are available in small 30mm, medium 40mm and large 50mm which represents the width of the solid body. The length of the shank is 50mm for the small, 70mm for the medium and 80mm for the large. Each one is supplied with 3 keys.

Made from 99% Stainless Steel, the 30mm wide one with a 5mm shackle is the one you need for the removable pin on the electric motor quick release brackets. The larger one is just a good all rounder and is 50mm wide by 75mm high all up with an 8mm shackle. Supplied with 3 keys.

Made from 99% Stainless Steel, this ultra heavy duty padlock is 60mm wide by 40mm high by 18mm deep. It has a 10mm shrouded pin. Supplied with 3 keys.

This is the one you need to lock the removable pin on your electric motor quick release bracket. ANYTHING LARGER WONT FIT. Made from 99% Stainless Steel it has a 30mm wide body with a 5mm shackle. Overall height is 60mm. Supplied with 3 keys for each lock and both locks are keyed alike.

Available in the 2 body sizes of 30mm wide with a 5mm Shackle and 40mm wide with a 6mm Shackle, these quality Relaxn padlocks are 99% Stainless Steel and are all keyed alike so you get 4 padlocks and 12 keys all up with each set. Great for use also around the home or work as you just need the one key to open all 4 padlocks. Overall height is approx 60mm.

The Neptune Sail Repair Kit is made in England by Wm Smith & Son and is the ideal handyman kit for any yacht, Kit contains, 1 x standard right hand sail palm, 1 x plastic tube of 5 assorted sail needles, 1 reel of waxed sewing thread and beeswax

Perfectly suited to Laser and other small sailing craft. It weighs only 34 grams and simply and securely clips onto the 60mm mast with the integral clip on bracket provided. It has a 200mm vane and gives fast and accurate wind direction readings which are 100% accurate in 2 knots of wind.

Weighing just 90g the Ronstan Shackle key and multi-purpose tool is one of the most well known sailing products around. Suits coined and slotted head shackle pins. Features sockets for 3/16” & 1/4” nuts. Screwdriver tip. Hollow end ideal for tightening drain plugs. Red plastic grip handle.

Made from 316 grade stainless steel it has a 3mm to 5mm semi hard blue plastic covering for easy grip and protection from damaging other fittings. The 8 functions including flat screwdriver, 8, 10 & 13mm spanner, shackle key and bottle opener.

Measuring 100mm by 81mm and held on by either 4 screws in the corners or double sided tape, the white plastic dual inclinometer has easy to read markings. It has the large scale form 0 - 45 degrees and the 0 - 5 degrees smaller one to attain optimum heel angle.

Measuring only 90mm by 40mm and held on by double sided tape it's filled with green fluorescent fluid with easy to read markings form 0 - 45 degrees.

These heavy duty wheels allow you to easily move your boat across sand and all firm surfaces including parking lot and boat ramps. The Heavy Duty wheels measure 105 x 135mm and can carry boats up to 200 Kg in total weight and up to four metres in length. An all non-corrosive construction with self-lubricating wheels means no maintenance is required and the wheels also easily lock up in up or down position for convenience. Suitable for all wooden, fibreglass, aluminium an inflatable boats with a solid, fixed transom.

C-TUG Dinghy Wheels are a lightweight and rugged option for transporting your dinghy up the beach, or down the boat ramp, avoiding having to carry the heavy load. Ideally suited for inflatable boat tenders or small lightweight aluminium boats. Easy installation & assembly, lightweight and effective 10 inch puncture free wheels made from fibreglass reinforced UV resistant plastic.

Heavy duty canoe and kayak trolley with sand wheels which can be completely taken apart for easy storage. The C-TUG SandTrakz is the best, most versatile and durable kayak cart on the market with a huge carrying capacity of up to 80kg (170lbs). SandTrakz puncture free wheels mimic the proven tank track system, the outer rim compresses when in use giving a longer track length. On soft sand this reduces how hard you have to pull to move your cart by up to half compared to standard wheels often used over sand.

These galvanised tinnie movers clamp around the gunwale and chine and you wind the handle to achieve the desired gap. It fits hull sides between 365mm to 590mm and the tyre size is 260mm diameter by about 85mm wide. You just position them towards the back of the boat either side where the balance point roughly is and then you can pick the nose up easily and push the tinnie around. Works with and without the engine still on the boat.