Online Accessories Store

This is a very popular light and is now available in LED with an inbuilt rocker switch. It has a 304 grade stainless surround. The three sizes are outside diameters of 100mm, 140mm and 160mm.

This low profile (10mm approx) surface mounted 12 volt LED light is stylish and practical. It has a 304 grade stainless surround with polycarbonate lens and the 16 LED's produce a bright warm white light. Outside diameter is 94mm. Light needs to be wired to a separate switch

This is an LED combination bow mount navigation light and is designed to be mounted on a horizontal surface. They are 12volt and this set comes with a white plastic surround. Dimensions are approx 90mm by 75mm by 40mm high.

This clamp on LED port and starboard nav light is also ideal for inflatables, sailboats or any other surfaces. The clamp opens up to 60mm wide. It takes 3 by C size batteries.

The Sport Colours – Camera Edition is the world’s first surface-mounted, full-colour underwater light with an integrated underwater camera. Designed for both recreational and professional use, this all-in-one solution delivers exceptional underwater visibility and unmatched lighting effects, ideal for leisure boats and sport fishing vessels. The Sport Colours – Camera Edition is more than an accessory – it’s a competitive advantage. Its wide angle-of-view offers a natural perspective with zero distortion, making it ideal for docking, hazard detection, and capturing underwater action in full clarity. Producing 3,500 fixture lumen’s, the Sport Colours – Camera Edition leverages OceanLED’s most advanced optical technology, ensuring uncompromising performance. Its just 100mm in diameter and 17mm deep. Note: Changes colour each time power is turned on and off.

Features:
• Up to 3500 fixture lumen’s
• Underwater Camera
• Advanced Underwater Optics
• Ultra Reliable
• Easy to Install
• Built In Driver
• IP 69K Certification

This surface mount underwater light is made from non-corrosive and chemical resistant polymer which totally encapsulates the LEDs and has an IP68 totally waterproof rating. The 10 x 3 watt Samsung LEDs have a 50,000 hour life and an effective rating of 235 Lumen for the blue colour light. The lights are supplied with a rubber wiring grommet and gland with 1.5 metres of wiring and S/S fastening screws. 2 light output colours available - white or blue. Suitable for both 12 volt and 24 volt systems. MUST be used underwater as these bright lights are water cooled. Light size : 161mm x 76mm

Only 25mm in height, the lens is 10 inches long and the overall length is 347mm or 14 inches. With 18 super bright 5630 SMD LEDs it puts out 288 Lumens and rotates 180 degrees. They surface mount and then the centre light bar swivels up and down. Perfect for not only reading but also ideal in a cabin or galley. 

Available in Blue or White, the Lumitec SeaBlaze Mini Underwater Lights are top quality and offer great value for their output and longevity. They have almost 900 Lumens output and their compact size means they can fit almost anywhere (See additional pictures for dimensions). They suit both 12V and 12V applications and have an anodized aluminium housing. Price is for a Pair

These are the light bars that we use on all our new boat installations now. The premium range of curved Lightbars are the apex predator of flood/spotlighting, aptly named the Mako series. The combination of flood and spotlight provides an even widespread beam while covering an extensive distance. The reflectors are designed with 94% reflector efficiency to take full advantage of the high performance CREE’s Next-Gen LEDs. These bad boys will eliminate darkness with an output of up to 22400 lumens! The die-cast aluminium housing is as rugged as it gets, torture tested to the extreme. These Mako Series Light Bars feature a large heat sink with a patented military-grade breather, GE Lexan lens and all 316-grade stainless steel hardware. The Mako Series Light Bars are built for the harshest environments. These Relaxn Mako Series Light Bars are available 20, 30 and 40-inch lengths and can be mounted almost anywhere. Kit Includes: 1 x Mako Series Light Bar, 2 x Mounting Brackets, 1 x Pre-wired Deutsch Plug (0.4m), 1 x Wiring Harness (4.2m) and 1 x 30A Relay.

This is the 1 piece black version. (The picture of the smaller pair just shows how they look from the left and the right.)

This is the 2 piece black housing version. (The picture of the smaller pair just shows how they look from the left and the right.)

You get both red and green lights and the optional stainless covers all in one pack. Mounted on a horizontal surface these LED Port and Starboard lights are compact and bright. They are 12volt and this set comes with stainless steel surrounds. Dimensions are approx 88mm by 55mm by 39mm high.

NO NEW DRILL HOLES REQUIRED. This is a pretty cool product and makes a great gift. If the boat has a large bung (40mm instead of the smaller 25mm) then this just fits straight on and fastens via the existing 4 screws. You just remove the old bung and housing and screw this one on with a bit of sealant. You don't need to drill a hole through the boat for the 12v wire as it runs internally in the black housing and then into your boat via the bung hole. Just hook it straight up to your 12v system with a simple switch and your good to go.

Great LED courtesy light for stair ways and cabin entrances. It only needs approx 20mm depth for flush mounting and the outside dimensions are 80mm X 30mm.

These are a great stylish light for use in cabins. The lens is 6 inches long and the overall length is 9 1/2 inches. They surface mount and then the centre light bar swivels up and down. Perfect for night time reading.

These are a great stylish light for use in cabins. The lens is 4 inches long and the overall length is 7 inches. They surface mount and then the centre light bar swivels up and down. Perfect for night time reading.

This surface mounted light sits 25mm high and has an inbuilt switch. Outside diameter is 90mm.

This white recessed down light is also a popular seller and is used in a lot of larger cruisers. It requires approx 15mm depth to be recessed. Outside diameter is 75mm. Light needs to be wired to a separate switch.

This is an LED combination bow mount navigation light and is designed to be mounted on a horizontal surface. They are 12volt and this set comes with a stainless steel surround. Dimensions are approx 90mm by 75mm by 40mm high.