X
50A or 60A Waterproof Surface Mount Circuit Breaker
$49.95
$49.95
Suitable for 12V-42V applications these breakers are what we use for all our Minn Kota installations. They are waterproof and resetable. Suitable for all marine applications including inside engine boxes.
Brand:
Hunts Marine
SKU: 302254
X
3 Way Port or Starboard Stainless Steel Rod Holder
$39.95
$39.95
Available in PORT and STARBOARD this 3 Way stainless steel rod holder fits into any 30 degree deck mount rod holder. Has a movable nylon tapered spacer for a secure fit and cross cut in the bottom to engage in any rod stop. (Note: The one on the left in the picture is of the STARBOARD rod holder as the straight rod holder is closest to your motor.)
Brand:
Hunts Marine
SKU: 99080P
X
Stainless Steel Transducer Spray Deflector - Tabs Down - 3 sizes
$40
$40
This unit is the same dimensions as the one above however the mounting tabs are bent down so it can fit on a smaller transducer bracket. This is the one you should get for almost all Quintrex and Stacer boats (and any other brand of alloy boat) that has a welded on transducer bracket. It is 150mm wide at its widest point and is either 135mm, 200mm or 250mm long.
Brand:
Hunts Marine
SKU: BM90131
X
Quintrex Fuel Sender - 5 Lengths
$55
$55
Replacement fuel sender used on almost all Quintrex and Stacer models. It comes in 5 different lengths (just select below) and the measurement is taken from the bottom of the post to up underneath the larger top plate. All are supplied with a new gasket. The diameter of the top plate is 65mm and it has 5 bolt holes. The Ohms range is 240-33.
Brand:
Quintrex
SKU: 40136
X
Oval Outboard Flusher
$25
$25
This is the one we use in all our workshops. Whilst a little bit more expensive than cheaper flushers, this is definitely on of the best to get. The reason being is that the frame is stainless and the muffs are made of rubber not PVC so they are much more flexible and seal better to the gearbox.
Brand:
Hunts Marine
SKU: 2282
X
Quintrex Angler Sport Seat
$255
$255
This is the current fold down Angler Sport seat in the Quintrex boats. Note: Price is for ONE only and does NOT include the pedestal.
Brand:
Quintrex
SKU: 210810
X
Boat Bench Seat Cushions - 300mm Wide
$39.99
$39.99
These bench seat cushions are a great addition to any open boat. These ones are 300mm wide and come in the two lengths of 600mm and 1200mm. They are available in Grey or Blue and come with the press studs required for easy installation and then easy removal when needed. They are made with dense 50mm thick foam and are covered in a UV stabilized vinyl fabric.
Brand:
Hunts Marine
SKU: MA700-1B
X
Quintrex Ski Pole mounted Alloy Cutting Board
$595
$595
New to the Quintrex range, this alloy cutting board fits on to the Quintrex stainless ski pole and is strong and sturdy yet easily removed when needed. (Note: Does not include ski pole in this price. Pole needs to be purchased separately.)
Brand:
Quintrex
SKU: A_CBS001
X
Quintrex Lean Seat Pedestal
$145
$145
Same specs as the standard Quintrex seat pedestal except its 900mm long. (Whilst not shown in main picture, it comes with the black plastic end cap as per the normal pedestal)
Brand:
Quintrex
SKU: A_PED004
X
Quintrex Trailer Plastic Dress Cap
$29.95
$29.95
This is the centre dress cap that clip into the black alloy mag wheels. Approx diameter of where it clips in is 65mm. Note: its common for these to fall out on long trips so we recommend gluing them in.
Brand:
Quintrex
SKU: 570036
X
Boat Bench Seat Cushions with Side Pocket - 400mm Wide
$59.95
$59.95
Same as the standard cushions above these come with side pockets. These ones are 400mm wide and come in the three lengths of 600mm, 1200mm and 1500mm. The 600mm comes with one pocket and the 1200mm and 1500mm comes with 2 pockets. They are available in Grey or Blue and come with the press studs required for easy installation and then easy removal when needed. They are made with dense 50mm thick foam and are covered in a UV stabilized vinyl fabric.
Brand:
Hunts Marine
SKU: MA710-2B
X
Fish Kool Chiller Bags
$139
$139
This fish chiller bag is designed to store your fish catch in a hygienic environment ensuring fresher, long lasting fish.This insulated bag hold ice for days. It’s portable, ideal for boats, has flared bottom to ensure it doesn’t tip over, it’s insulated with 1/2” dense foam, is UV and mildew resistant. Includes drain plug for easy emptying. Small size is 750mm x 400mm x 200mm. Medium size is 1000mm x 400mm x 200mm. Large size is 1400mm x 400mm x 400mm. X-Large size is 2000mm x 600mm x 400mm.
Brand:
Hunts Marine
SKU: AC7272
X
Flare Kit
$90
$90
Available for IN STORE pickup only. This flare kit includes 2 by Orange smoke day flares and 2 by red night time flares. They come packed in a heavy duty sealed plastic bag.
Brand:
Hunts Marine
SKU: 3218
X
Stainless Adjustable Rail Mount Rod Holder - 22mm, 25mm and 32mm
$19.99
$19.99
Made from 316 stainless, the rod holder pivots both left and right as well as up and down. It comes in 3 versions and can either suit 22mm, 25mm or 32mm rails.
Brand:
Hunts Marine
SKU: FM99117
X
Quintrex Rocker Switch - Accessory
$24.95
$24.95
Replacement 3 position rocker switch for the accessories.
Brand:
Quintrex
SKU: 160544
X
Quintrex Weld on Maxi Bracket
$229
$229
The Quintrex alloy weld on maxi bracket suits both the fold down rear telescopic ladder as well as the Quintrex burley bucket. Supplied with the main pin, nuts and bolts, nylon washers for pin as well as the end clip. They come unpainted and can be painted afterwards if you like.
Brand:
Quintrex
SKU: A_AMAXIW
X
Boat Fenders - Blue Ends
$19.95
$19.95
Made in Holland, these heavy duty inflatable fenders are made from UV resistant white PVC with reinforced blue heads. They are a commercial fender at an affordable price and are what we sell and recommend with all our boats. They are available in 6 sizes: (Length by Diameter)
450mm by 120mm
580mm by 150mm
600mm by 180mm
620mm by 210mm
700mm by 240mm
900mm by 300mm
450mm by 120mm
580mm by 150mm
600mm by 180mm
620mm by 210mm
700mm by 240mm
900mm by 300mm
Brand:
Hunts Marine
SKU: W1540
X
Stone Guard Kit - 2 sizes
$405
$405
Available in 2 sizes, the Oceansouth stone guard protects your boat from stones and other road debris when being towed, helping to maintain the condition of your boat. Constructed using 25mm diameter stainless steel tube creating a robust framework which supports the heavy duty mesh. Mesh has large built in zipper to allow easy access to items such as winch and spare wheel. Supplied complete with all mounting components for quick and easy installation. One size is 1.52m long by 0.9m high and the other is 1.87m long by 1.0m high.
Note: CLICK HERE for fitting instructions when you receive the unit. Sometimes none are supplied in the box when shipped.
Note: CLICK HERE for fitting instructions when you receive the unit. Sometimes none are supplied in the box when shipped.
Brand:
Hunts Marine
SKU: MA300A-1
X
Canopy Thumb Screws - White or Black
$3.50
$3.50
Canopy thumb screws to suit deck mounts and tube clamps.
Brand:
Hunts Marine
SKU: S315
X
Quintrex Maxi Bracket Pin
$35
$35
Replacement pin for the Quintrex bolt on and weld on maxi brackets. It is 25mm diameter and 340mm long. You will need to purchase below the nylon washers and locking pin separate.
Brand:
Quintrex
SKU: 120187
X
Canopy Tube Ends - 2 Sizes in 2 Colours
$2
$2
Canopy tube ends come in 2 sizes and also 2 colours so there are 4 to choose from. The smaller ends suit tube that has an outside diameter of approx 20mm and the larger ends suits tube that has an outside diameter of approx 25mm.
Brand:
Hunts Marine
SKU: S200W
X
Boat Bench Seat Cushions - 400mm Wide
$49.99
$49.99
These ones are 400mm wide and come in the three lengths of 600mm, 1200mm and 1500mm. They are available in Grey or Blue and come with the press studs required for easy installation and then easy removal when needed. They are made with dense 50mm thick foam and are covered in a UV stabilized vinyl fabric.
Brand:
Hunts Marine
SKU: MA700-2B
X
Quintrex Rocker Switch Insert - Middle
$6
$6
If you want to extend you Quintrex switch panel then use this middle surround with your extra switch or switches.
Brand:
Quintrex
SKU: 160545
X
Fender Basket - Stainless Steel
$120
$120
Heavy duty stainless steel fender baskets are ideal for mounting on the rails of cruisers. They are made of 10mm 304 grade rounded stainless steel and come complete with rail clamps. They will suit 22mm, 25mm and 32mm diameter rails and are available in 5 sizes: (Diameter by Height)
175mm by 450mm
218mm by 450mm
250mm by 490mm
300mm by 620mm
310mm by 550mm
175mm by 450mm
218mm by 450mm
250mm by 490mm
300mm by 620mm
310mm by 550mm
Brand:
Hunts Marine
SKU: 37760
