X
Large Bait Board - Rod Holder or Rail Mount
$99.99
These white polypropylene boat boards are tough against cuts and UV deterioration. The size of the board is 700mm by 420mm and they can be purchased in either a twin rod holder or 25mm twin rail mount setup. Both models have adjustable width mounting from 285mm to 580mm so will fit almost any setup. Both mounting setups also feature an adjustable thumbscrew ratchet which allows the table to be fixed at the desired angle.
Brand:
Hunts Marine
SKU:
X
Live Bait Tank Kit
$195.00
Easy to install, this 30 litre live bait tank kit is 390mm Long, 260mm Wide and 290mm Deep and comes complete with heavy duty hinged lid for easy fitting to most vessels, all necessary plumbing connections, spray head plus 1.6m hose. The hatch has its own recess so all you do have a cutout big enough to suit the hatch recess and then the tank and the hatch bolt together from top and bottom and you plumb up as needed. Pump sold separately.
Brand:
Hunts Marine
SKU: SPXLBTHO-KIT
X
Long Nose Pliers
$14.99
Manufactured from high grade, corrosion resistant polished marine stainless steel. They are heavy duty and are a must for your tackle box.
Brand:
Hunts Marine
SKU: SHRFT2
X
Oval Stainless Steel Angled Rod Holder
$26.99
This is a very common pressed 304 grade stainless steel oval flush mounted 30 degree rod holder. Comes with cap and mounting gasket. Tube length approx 240mm.
Brand:
Hunts Marine
SKU: W511
X
PVC Angled Oval Rod Holder
$4.50
Available in Black or White, quality PVC 30 degree oval angled rod holder. Length is 240mm and inside diameter 40mm. Note: If you are after the Genuine QUINTREX black oval angled rod holder please see the Quintrex Genuine Accessories tab in the Accessories drop down menu.
Brand:
Hunts Marine
SKU: 21175
X
PVC Angled Rectangular Rod Holder
$4.50
Available in Black or White, PVC 30 degree angled deck mount rod holder with rectangular flange. Flange size is approx 85mm by 55mm. The tube is 250mm long and has an inside diameter of 40mm.
Brand:
Hunts Marine
SKU: 21173
X
PVC Side Mount Rod Holder
$10.00
Available in Black or White, designed for surface mounting and can be used on its own or in gangs of two or more on the boat or at home in the garage. Length is 235mm and inside diameter is 40mm.
Brand:
Hunts Marine
SKU: 192592
X
PVC Straight Rectangular Rod Holder
$4.50
Available in Black or White, PVC straight deck mount rod holder with rectangular flange. Flange size is approx 85mm by 55mm. The tube is 250mm long and has an inside diameter of 40mm.
Brand:
Hunts Marine
SKU: 21171
X
Rail Mount Adaptor for Adjustable Rod Holder
$6.50
Use this rail mount adaptor for the adjustable rod holder above.
Brand:
Hunts Marine
SKU: RWB2192
X
Railblaza Multi Directional Rod Holder with Surface Mount Base - Black
$53.00
The Railblaza rod holder with surface mount star base is perfect for spinning, bait casting, boat and fly reels. It turns a full 360 degrees and pivots 90 degrees vertically. The rotating collar helps prevent "strike-theft" and the rear gimbal lock reduces rod rotation. Remove the rod holder from its base and all you are left with is a slim line round base. No need to drill large holes through the deck, just needs 2 screws or 3/16" bolts.
Brand:
Hunts Marine
SKU: RB04-4020-11
X
Railblaza Multi Directional Rod Holder with Surface Mount Base - White
$53.00
The Railblaza rod holder with surface mount star base is perfect for spinning, bait casting, boat and fly reels. It turns a full 360 degrees and pivots 90 degrees vertically. The rotating collar helps prevent "strike-theft" and the rear gimbal lock reduces rod rotation. Remove the rod holder from its base and all you are left with is a slim line round base. No need to drill large holes through the deck, just needs 2 screws or 3/16" bolts.
Brand:
Hunts Marine
SKU: RB04-4020-21
X
Railblaza Rod Rak 2 Rod Holder Storage System - Black or White
$33.95
Available in Black or White, the RodRak is an expandable fishing rod storage system for hanging your rods from any vertical or horizontal surface. This kit will hold two fishing rods on the shed or garage walls, under the cabin roof, inside the gunnel or any other place you can screw into. The hooks can be installed standalone, or joined together. If needed you can add a 4mm bungee cord (not supplied) as a retention band. Features soft flexible inserts to protect handle and tip while allowing fast and easy stowage or removal. Rod/pole handle size from 25mm to 38mm diameter.
Brand:
Hunts Marine
SKU: RB09-0008-21
X
Railblaza Rodstow 2 Rod Storage - Black or White
$44.99
The Railblaza RodStow rod holder system is a vertical fishing rod storage rack and caddy for boats. RodStow rod racks will hold your rods above deck, safely and securely. The RodStow Double is available in black or white, comes with stainless steel fasteners and can be installed in minutes. It features a storage caddy for lures, traces and other tackle, it's even big enough to hold a small tackle box. These rod holders have a removable gimbal pin that you can leave in to support the rod and stop rotation, or remove to let the rod pass through. 40mm tube sizes caters for most equipment.
Brand:
Hunts Marine
SKU:
X
Railblaza Rodstow 3 Rod Storage - Black or White
$64.99
The Railblaza RodStow rod holder system is a vertical fishing rod storage rack and caddy for boats. RodStow rod racks will hold your rods above deck, safely and securely. The RodStow Double is available in black or white, comes with stainless steel fasteners and can be installed in minutes. It features a storage caddy for lures, traces and other tackle, it's even big enough to hold a small tackle box. These rod holders have a removable gimbal pin that you can leave in to support the rod and stop rotation, or remove to let the rod pass through. 40mm tube sizes caters for most equipment.
Brand:
Hunts Marine
SKU:
X
Roll Up Vinyl Australian Fish Ruler
$24.95
This is a must have for every boat. Made from hard wearing easy to clean PVC material, this Australian Fish ID Maxi Ruler is one of the longest on the market at 35cm wide and stretching to 150cm. This mat conveniently rolls up and is secured with a velcro strap for easy storage in the boat or tackle box. It also contains a good eating guide for each species as well as a dangerous listing and angling merit of each species.
Brand:
Hunts Marine
SKU: AC6107
X
Rowlock Mount Stainless Steel Rod Holders - Pair
$80.00
With a 10mm shaft diameter they fit any size of rowlock holder and are a great addition to any tinnie. The tube is 150mm long. They are made from 304 stainless and have plastic end caps so your rods and reels wont get harmed.
Brand:
Hunts Marine
SKU: 7198
X
SEA PRO Deluxe Floating Net – 2 sizes
$35.00
The Sea Pro Deluxe Floating Net is ideal for river, inshore and offshore work. Thanks to the handle and the floating structure, it can be easily recovered in case of accidental release. The mesh is rubber and the net head is 40cm wide at mouth and 45cm long on the large model and 30cm wide by 35cm long on the small. Collapsed the over all length is just 68cm and when extended its 160cm long for the large and 45cm and 80cm for the small. It has a soft foam rubber hand grip with elastic wrist strap with clip.
Brand:
Hunts Marine
SKU: AC9454
X
Single Stainless Steel Rod Holder
$29.99
Single stainless steel rod holder that fits into any 30 degree deck mount rod holder. Has a movable nylon tapered spacer for a secure fit and cross cut in the bottom to engage in any rod stop.
Brand:
Hunts Marine
SKU: FM99131
X
Small Bait Board - Rod Holder or Rail Mount
$29.99
These white polypropylene boat boards are reinforced with a unique rib core to provide a rigid and stable surface. The size of the board is 460mm by 375mm and they can be purchased in either a rod holder or 25mm rail mount setup. Both mounting setups feature an adjustable thumbscrew ratchet which allows the table to be fixed at the desired angle.
Brand:
Hunts Marine
SKU: MA104-1
X
Split Ring Bent Long Nose Pliers
$14.99
Manufactured from high grade, corrosion resistant polished marine stainless steel. They are heavy duty and perfect for opening split rings on lures.
Brand:
Hunts Marine
SKU: SHRFT3
X
Spooling Station - Bracket or Star Mount
$45.00
The Spooling Station is an easy, compact, one-person solution to effortlessly re-spool your fishing reel. The fishing line Spooling Station devices are designed to help you re-spool your line in the garage or on the go in the boat or kayak where vertical tracks are present or purchase the star port version and use an existing Rail Blaza Star Port. Can be easily attached directly to a flat vertical surface with the supplied self-tapping screws. Fully adjustable width and height to suit a wide range of spools. The integrated brake adds force to the spool to reduce the risk of major knots in the line. The pivoting base allows the Spooling Station to move freely and follow the movement at the tip of the rod. The height-adjustable shaft means it is compatible with fishing line spools up to 50mm (2”) thick and a maximum diameter of 115 mm (4.5”) (Fishing line not included)
Brand:
Hunts Marine
SKU: BBB-RB09-4159-11
X
Stainless Adjustable Rail Mount Rod Holder - 22mm, 25mm and 32mm
$19.99
Made from 316 stainless, the rod holder pivots both left and right as well as up and down. It comes in 3 versions and can either suit 22mm, 25mm or 32mm rails.
Brand:
Hunts Marine
SKU: FM99117
X
Stainless Burley Muncher
$49.90
700mm long and made from tough 20mm stainless tube, this berley muncher is fully welded, linished and polished by hand to give that ultimate gleam to the back of your boat. The Viper stainless steel muncher teeth require less physical work to produce a much finer berley and has no problem cutting through frozen pilchards or any fish for that matter.
Brand:
Hunts Marine
SKU:
X
Stainless Clamp on Rod Holder - Multi Fit
$89.95
Adjustable in both rail size and rod angle, it's made from solid 316 grade mirror polished stainless steel and has a soft black PVC liner to protect rod and reel. The slotted barrel and multi-position articulation is designed for setting rods with overhead reels to the optimum fishing position. Also commonly used in multiples for rod storage racks for overhead and spinning reels. Tube length is 245mm and the inside diameter of tube is 46mm. It is adjustable to suit rail sizes from 19mm to 25mm.
Brand:
Hunts Marine
SKU: 192600
