motors

IF YOU WANT THE DEAL OF THE YEAR THEN THIS IS IT. For a limited time at Hunts Marine we have the 55lb 60" Terrova above available as a package. Comes with the heading sensor, hand held remote, 50 amp circuit breaker, 70 amp 3 pin genuine power plug, quick release bracket, lock for quick release bracket and shaft stabiliser. Note: The package is available via an internet order and we will send it out (freight additional) or pickup from our Sydney store only.

Available in 2 sizes, the Minn Kota Riptide Terrova with I-LInk is the exact same engine as the standard Terrova however the I-Link feature lets you control the motor from your Humminbird fishfinder or its new touch-screen remote. It includes our new, most accurate Spot-Lock ever, every i-Pilot feature, and the ability to follow depth contours, save and retrace your Humminbird Current Track, and return to productive waypoints.

With auto stow and deploy and power trim, the saltwater Ulterra is available in 4 models with 80lb and 112lb thrust and with shaft lengths from 60" to a massive 72" to cater for the offshore angler who wants to hold those off-shore marks. Standard features of the Ulterra include a reinvented spot lock to hold you tighter to your fishing spot, new heading sensor, I-Pilot hand held remote, power trim and an optional foot pedal. CLICK HERE to see a great bunch of videos on how to use your Minn Kota Ulterra.

Available in 4 sizes, the Minn Kota Riptide Ulterra with I-LInk is the exact same engine as the standard Ulterra however the I-Link feature lets you control the motor from your Humminbird fishfinder or its new touch-screen remote. It includes our new, most accurate Spot-Lock ever, every i-Pilot feature, and the ability to follow depth contours, save and retrace your Humminbird Current Track, and return to productive waypoints. Link on Riptide Ulterra also gives you control of Auto Stow/Deploy and Power Trim. CLICK HERE to see a great bunch of videos on how to use your Minn Kota Ulterra.

This replacement sheer pin suits current and superseded Minn Kota motors. There are two different sized sheer pins. One does engines up to (but not including) 80lbs and the other does 80lb engines and above.

A lot of people buy this so they can mount it on the wall of their garage and then you can hang your Minn Kota bow mount away safely and securely when not in use on your boat. It Suits the Quick release bracket above.

The Minn Kota Stabiliser is designed to reduce bounce on bow-mount trolling motors. It's equipped with a low profile base that allows the stabiliser to be easily folded down or removed when not in use. The pole can be cut down to suit the required height and it suits all RipTide, Ulterra, Terrova and PowerDrive bow mount engines.

The Minn Kota Talon cover is available in Black only and the two sizes to suit either the 8ft models or the 15ft models.

The Talon Anchor System is designed to quickly and quietly stop and position your boat in depths down to 15ft – whether you’re fishing saltwater or freshwater, the Talon is the ultimate holding device for stealth fishing. Operating from the boat’s existing battery setup, the Talon vertically deploys its three stage telescopic spike with the wireless remote and without the fish-spooking noise of a traditional anchor. When not in use, the lightweight Talon can be taken off the boat thanks to its standard release bracket or folded away for garaging with the optional tilt bracket. It’s electro-mechanical, cable-driven design, is easy to install with minimal wiring & rigging. A wireless remote is supplied as standard and you can purchase the optional foot control. The Talon is available in 4 sizes with different colour combos for each one. Select  your desired model in the drop down menu to see options. Popular features include: Multiple Control Options: Control Talon from anywhere on the boat using your choice of options: Control Panel, Wireless Remote, Foot Switch, i-Pilot or i-Pilot Link Remote, Mobile App or right from the Humminbird fish finder. Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), and standard (normal anchoring). Built-in Work Light: Illuminate the boat transom any time of day — or night. Includes two colors (white and blue) and each has three brightness intensity settings. Indestructible Anchoring Spike: Strong and flexible composite anchor spike backed with a lifetime guarantee and the Vertical Deployment keeps the Talon out of the way of your fishing lines.

The Minn Kota Talon tilt bracket is made from marine grade, anodized aluminum and accommodates for low clearance areas and boat storage. Features adjustable deck support for added stability while tilting.

The Minn Kota Talon wireless foot control gives you hands free control of you Talons and now including control of anchoring modes.

Allows mounting on lower unit of bow or transom-mount motors. Rugged, durable construction. Fits transducers of all major manufacturers.

RUNOUT MODEL, RUNOUT MODEL, RUNOUT MODEL. The ProMariner ProSport 20 Plus is the previous version of the 3 bank 20 Amp HD model above. It just doesn't have the LED indicator. 

The ProMariner ProSportHD 20 Plus operates on exactly the same technology as the ProSportHD 12 above except it is a 20Amp charger and is designed for triple battery setups. It also has the expanded LED display with a completion status gauge.

The ProMariner ProSportHD 20 operates on exactly the same technology as the ProSportHD 12 above except it is a 20Amp charger and is designed for twin battery setups.

The ProSportHD 12 Dual bank 12 Amp fixed charger is prewired for easy installation and is 100% waterproof and saltwater tested. Its exclusive microprocessor and software ensures that all of the available charging amperage is fully utilized to meet the unique demands of each onboard battery and charge it in the most efficient way. After the batteries are charged, the ProSport 12 monitors and maintains the charge only as needed—reducing its AC power consumption. Connection to shore power is made easy by the included 10A plug. The “System Check OK” and “Battery Bank Trouble” LED indicators are exclusive to the ProSport line and confirm the system is operating properly or help shorten any required time spent troubleshooting. Compatible with flooded and AGM batteries, this smart charger provides three charging modes plus a storage recondition mode which helps extend the life of your batteries. Because this charger is waterproof, it can be installed almost anywhere on the boat. All of these features come in a charger that is 40% lighter than conventional epoxy filled (potted) chargers.

The ProSport 6 Amp fixed charger is prewired for easy installation and is 100% waterproof and saltwater tested. Its exclusive microprocessor and software ensures that all of the available charging amperage is fully utilized to meet the unique demands of each onboard battery and charge it in the most efficient way. All ProSportHD Generation 4 Chargers boast a new tri-surface heatsink design. This new heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode. ProSportHD’s enhanced microprocessor and software provides new digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status. Designed for use in harsh environments with our industrial grade jacketed 1.8m DC and AC power cables which include new molded strain reliefs and wire splitters.

The Railblaza adjustable height stabiliser can be offset inboard or outboard to suit the alignment of your Trolling motor shaft. It is height adjustable in almost any angle and the flexible strap holds the shaft captive to avoid vibration on-road or on water. Max height from the deck of boat to the centre of the electric engine shaft is approx 31cm. It can be removed to create a clear deck when Trolling motor is in use and will fit any StarPort mount to suit your application (ordered separately) Suits all RipTide, Ulterra, Terrova and PowerDrive bow mount engines. Note: The top can be twisted and then locked to line up correctly with the shaft.

The Railblaza StarPort deck mount base is available in either black or white and suits the stabiliser above. It can be used with or without the mounting color and is supplied with stainless steel mounting bolts and screws so you can just use what suits best.

The Railblaza Trolling Support Motor Kit provides a secure support for trolling motor shafts while travelling. The fixed extender gives you the correct height off the deck and the G-Hold gives tight retention for the trolling motor shaft. The support can be removed from the StarPort when not used, clearing the deck for fishing. Other mounts are also available if the StarPort is not suitable for the application. The height from the deck of the boat to the middle of the bow mount electric engine shaft is approx 18cm. Suits all RipTide, Ulterra, Terrova and PowerDrive bow mount engines. Note: The top can be twisted and then locked to line up correctly with the shaft.

The Railblaza RailMount is a practical and simple-to-use mount, allowing the easy attachment of Railblaza accessories, and many other accessories. The RailMount simply fits around any rail and screws together for a firm fit. There is no need to drill holes so it can easily moved to a different spots if necessary. The RailMount 19-25 suits rails 19 to 25mm and the 32-41 suits the larger 32 to 41 mm rails. All RailMounts come complete with adapters, rubber grips, self-adhesive grip tape and the necessary stainless steel mounting screws.

The RAM tough claw with round base consists of the small Tough-Claw base, double socket arm and round 6cm base adapter. The Tough-Claw can be clamped on rails from 0.625" - 1.5" outer diameter and the overall maximum height from the bottom of round base (deck of boat) to the Minn Kota shaft is approx 25cm. The round base adapter contains the industry standard universal hole pattern, which will connect to a large variety of RAM Mount and third party cradles or just screw it straight down to a flat surface. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm thus allowing for almost infinite adjustment. Suits all RipTide, Ulterra, Terrova and PowerDrive bow mount engines.

This is the genuine Minn Kota replacement strap for the head stabiliser above. 

Eco-friendly, universal and light, the TEMO propulsion solution takes care of both boaters and the environment. Designed to adapt to all boat types and uses, TEMO is a light, compact solution which can completely replace your existing outboard in many situations. No more fuel storage issues, or tricky handling of a heavy, outdated outboard motor. The lithium battery is fully integrated providing an extremely and user-friendly small electric outboard solution for all smaller craft. The package includes: TEMO 450W Motor, 240V charger, Transom mount rowlock fitting kit to simply attach it to your dinghy or inflatable boat, Magnetic Safety Key & Strap - activates or deactivates the thruster. The motor will stop automatically if you fall into the water.

Whisper quiet, you will wonder how you ever got by without a TEMO. The 450W motor delivers 200W of propulsive thrust at the prop (equates to 1.5hp), Up to 80 minutes range (at cruising power), Light & easy to handle - weighs less than 5kg, Battery provides an estimated 10,000 hours of use before replacement is required, control handle is ambidextrous, 100% waterproof - the unit has an IP67 water-tight rating, Buoyancy - sinks after a few seconds. We recommend purchasing the separate buoyancy kit if your application requires.