X
Quintrex Large Bung and Housing
$8.00
Quintrex large 38mm screw in bung and housing.
Brand:
Quintrex
SKU: 635
X
Quintrex Latest Logo Decal - 2 Sizes - Each
$25.00
This is the latest boat decal in their new logo design. Its individual lettering on a backing then when applied to the hull you peel off the front protective sheet. Dimensions are 440mm by 55mm for the small and 640mm by 80mm fir the large. This is the dimensions of the overall lettering when applied to the hull. Price is for one only.
Brand:
Quintrex
SKU: 268101
X
Quintrex Lean Seat Pedestal
$125.00
Same specs as the standard Quintrex seat pedestal except its 900mm long. (Whilst not shown in main picture, it comes with the black plastic end cap as per the normal pedestal)
Brand:
Quintrex
SKU: A_PED004
X
Quintrex Lean Seat Top
$75.00
Made from grey marine grade vinyl it has thick contoured foam padding and threaded inserts in base with S/S screws provided. Suits Quintrex standard or extra long lean seat pedestal.
Brand:
Quintrex
SKU: RWB5048
X
Quintrex Maritime Seat
$450.00
This is the current Maritime seat in the Quintrex boats and it has the flip up bolster at the front. Give your boat a face lift today. You can also fit one or both of them with the slider to suit. Note: Price is for ONE only and does NOT include the pedestal.Â
Brand:
Quintrex
SKU: 210813
X
Quintrex Maxi Bracket Locking Pin
$14.95
Stainless Steel spring loaded maxi bracket locking pin.
Brand:
Quintrex
SKU: 161237
X
Quintrex Maxi Bracket Pin
$35.00
Replacement pin for the Quintrex bolt on and weld on maxi brackets. It is 25mm diameter and 340mm long. You will need to purchase the locking pin separate.
Brand:
Quintrex
SKU: 120187
X
Quintrex Meher Mechanical Brake Pads - Pair
$45.00
These are the brake pads to suit the meyer caliper above. Almost all Quintrex and Stacer trailers in the last 10 years or so have Meyer brake components. The Meyer name will be stamped on the caliper arm and will be easy to see. If you have a Meyer caliper and it is a mechanically braked trailer (not electric/hydraulic brakes) then these will be the brake pads to suit. They come as a pair but PLEASE NOTE you will need 2 pair to do each axle.
Brand:
Quintrex
SKU: 505070
X
Quintrex Meher Mechanical Caliper
$74.95
Almost all Quintrex and Stacer trailers in the last 10 years or so have Meyer brake components. The Meyer name will be stamped on the caliper arm and will be easy to see. If you have a Meyer caliper and it is a mechanically braked trailer (not electric/hydraulic brakes) then this will be the replacement caliper to suit. It comes with 2 new brake pads. Make sure you grease up the slides when you bolt the new caliper to the axle.
Brand:
Quintrex
SKU: 566500
X
Quintrex Meher Mechanical Hub
$155.00
90% of Quintrex and Stacer trailers that have mechanical brakes run this hub. Only the very small unbraked tinnie trailer may use something different. It is a 5 stud Holden pattern that runs Ford bearings. The hubs are galvanised and come with the bearings already press in. make sure you grease them up well with a good quality bearing grease and clean the axle with some sand paper where the seal sits. NOTE: Price is a for one hub only.
Brand:
Quintrex
SKU: 505062
X
Quintrex MEYER Jockey Wheel Handle
$19.95
If you have a Quintrex/Stacer trailer and your jockey wheel looks like the one in the 2nd picture and has the brand MEHER stamped on it then this is your jockey wheel handle. It has a grub screw to hold it on to the shaft. The grub screw is opposite to the flat section in the head of the handle. Make sure you look at all the photos.
Brand:
Quintrex
SKU: 570005
X
Quintrex Mudguard Decals - Pair
$14.95
Genuine Quintrex Mudguard decals. Dimensions are approx 160mm by 55mm (At the widest point).Â
Brand:
Quintrex
SKU: 268031
X
Quintrex Nylon Washer for Maxi Bracket
$1.50
This is the nylon washer that suits the maxi bracket pin. Make sure you get a few as you need one each end of the maxi bracket pin to make it all work smoothly.
Brand:
Quintrex
SKU: 160120
X
Quintrex Port (Red) Horizontal Mount Nav Light
$49.95
Quintrex genuine port side (Red) horizontal mount navigation light.
Brand:
Quintrex
SKU: 160512
X
Quintrex Rear Lounge Clip
$14.95
Quintrex stainless spring loaded clip for holding in the folding rear lounge.
Brand:
Quintrex
SKU: C161236
X
Quintrex Rocker Switch - Accessory
$24.95
Replacement 3 position rocker switch for the accessories.
Brand:
Quintrex
SKU: 160544
X
Quintrex Rocker Switch - Nav Lights
$24.95
Replacement 3 position rocker switch for the navigation lights.
Brand:
Quintrex
SKU: 160542
X
Quintrex Rocker Switch - Pump
$24.95
Replacement 3 position rocker switch for the live bait tank, bilge pump or deck wash.
Brand:
Quintrex
SKU: 160543
X
Quintrex Rocker Switch Insert - End Piece
$4.50
This is used at either the left or right end of your switch panel.
Brand:
Quintrex
SKU: 160546
X
Quintrex Rocker Switch Insert - Middle
$4.50
If you want to extend you Quintrex switch panel then use this middle surround with your extra switch or switches.
Brand:
Quintrex
SKU: 160545
X
Quintrex Seat Covers - 2 Sizes
$39.95
Spec up your vessel with Quintrex branded seat covers. Designed to extend the life of your boat seats, these covers are ideal for added protection during towing or storage. Small suits the Bass Pro and Angler pro FOLDING seats and large suits the Maritime and Apex NON-FOLDING seats.
Brand:
Quintrex
SKU: 161509
X
Quintrex Seat Pedestal
$125.00
This Quintrex seat pedestal is 600mm long and the tube is 50mm diameter and suits all Renegades, Hornets, Explorer Trophies and pretty much any model with the underfloor spiggot position.
Brand:
Quintrex
SKU: A_PED0033
X
Quintrex Silver Transom Decal - Each
$19.95
Genuine Quintrex Silver Transom decal. Dimensions are approx 25cm by 7cm (At the widest point). Note: In the picture you can see where the sticker peels off from the main square background. It roughly follows the outlines of the flags and then is thinner for the words section. Price is for one only.
Brand:
Quintrex
SKU: 268019
X
Quintrex Ski Pole mounted Alloy Cutting Board
$595.00
New to the Quintrex range, this alloy cutting board fits on to the Quintrex stainless ski pole and is strong and sturdy yet easily removed when needed. (Note: Does not include ski pole in this price. Pole needs to be purchased separately.)
Brand:
Quintrex
SKU: A_CBS001
