X
Quintrex Fish Sport Seat
$345
$345
This is the current fold down Fish Sport seat in the Quintrex boats. Note: Price is for ONE only and does NOT include the pedestal.Â
Brand:
Quintrex
SKU: 210802
X
Quintrex Foam Rod Clip to Suit Side Panels
$14.95
$14.95
This replacement Quintrex Foam Rod Clip is the one that is in all the boats that have the plastic side panels. It simply presses in so no gluing or fastening needed.
Brand:
Quintrex
SKU: 161059
X
Sold Out
Quintrex Folding Anchor Light
$155
$155
THIS FOLDING ANCHOR LIGHT IS NO LONGER AVAILABLE AND NEVER WILL BE. SEE BELOW FOR REPLACEMENT. It's a better telescopic light but yes you will have to change the base as well.Â
Brand:
Quintrex
SKU: 160506NLA
This product is sold out
X
Quintrex Folding Ladder Rubber Bungee Loop
$24.95
$24.95
This rubber 6 inch bungee loop is used on the later model larger Quintrex, Stacer and Yellowfin boats.
Brand:
Quintrex
SKU: 160415
X
Quintrex Folding Ladder Step Insert
$24.95
$24.95
Replacement Quintrex folding ladder plastic step insert.
Brand:
Quintrex
SKU: 161278
X
Sold Out
Quintrex Folding Ladder Ute Loop
$3.50
$3.50
Quintrex Folding Ladder and Windscreen ute loop for holding your ladder up or your windscreen open.
Brand:
Quintrex
SKU: 7448
This product is sold out
X
Quintrex Folding Seat Leg Bracket
$24.95
$24.95
This is the plastic seat leg bracket on its own as a replacement.
Brand:
Quintrex
SKU: 161295
X
Quintrex Folding Seat Leg Kit
$55
$55
This is the folding leg that is used on most of the Quintrex and Stacer rear lounges. It's 320mm long overall and has 25mm aluminium tubing which can be cut down if needed. Diameter of the 4 screw hole mounting base is 80mm. It's supplied assembled with the plastic bracket, pole and end cap.
Brand:
Quintrex
SKU: QFL
X
Quintrex Folding Stainless Telescopic Ladder
$290
$290
Quintrex 3 rung stainless steel telescopic ladder to suit maxi bracket. Width at the top to fit between the aluminium brackets is 285mm.
Brand:
Quintrex
SKU: A_RLM020
X
Quintrex Front Cargo Netting
$29.95
$29.95
This is the Quintrex cargo netting that is fitted in the front of boats like the 430 and 481 Fishabout to create extra storage.
Brand:
Quintrex
SKU: A_CARGO
X
Quintrex Fuel Breather
$9.95
$9.95
Replacement Quintrex fuel breather. Note: Does NOT include the shroud, that is sold separately.
Brand:
Quintrex
SKU: 160411
X
Quintrex Fuel Breather and Shroud
$14.95
$14.95
This is both of them together in a kit.Â
Brand:
Quintrex
SKU: Q160411
X
Quintrex Fuel Breather Shroud
$5
$5
Replacement Quintrex fuel breather shroud. Designed to stop any escaping fuel from running down the side of your boat.
Brand:
Quintrex
SKU: 3083
X
Quintrex Fuel Filler Assembly
$24.95
$24.95
Quintrex nylon fuel filler assembly in black. If you need a replacement fuel cap then you need to buy this assembly and just unscrew the cap from its retaining strap.
Brand:
Quintrex
SKU: 160400
X
Quintrex Fuel Gauge
$45
$45
Replacement fuel gauge used on almost all Quintrex and Stacer models. NOTE: Even if your fuel gauge is not an ECMS one and is a Faria or other brand this is the only one available and will work with your existing sensor. It has a Red backlight.Â
Brand:
Quintrex
SKU: 165057
X
Quintrex Fuel Sender - 5 Lengths
$55
$55
Replacement fuel sender used on almost all Quintrex and Stacer models. It comes in 5 different lengths (just select below) and the measurement is taken from the bottom of the post to up underneath the larger top plate. All are supplied with a new gasket. The diameter of the top plate is 65mm and it has 5 bolt holes. The Ohms range is 240-33.
Brand:
Quintrex
SKU: 40136
X
Quintrex Fuel Sender Gasket
$5
$5
Replacement fuel sender gasket for senders above.
Brand:
Quintrex
SKU: GFS
X
Quintrex Genuine Recessed Cup Holder - White or Black
$10
$10
Whilst it's a little hard to see in the picture, these cup holders have a smaller section in the bottom to hold cans and then a bigger top section to hold larger diameter bottles. They suit a hole cutout of approx 90mm and the overall measurement from the outside of the lip is 110mm. They have a depth of 80mm and also have a small spout on the bottom to take a water drain if desired.
Brand:
Quintrex
SKU: 160923
X
Quintrex Glove Box
$69.95
$69.95
Quintrex lockable recessed glove box. Cut out dimensions are approx 300mm wide by 110mm high by 170mm deep.
Brand:
Quintrex
SKU: A_GBDH
X
Quintrex Hull Decal on Silver Background - Pair
$40
$40
This is the Boat decal that is on current model Quintrex Boats and is on a silver background. (White background decal is no longer available) Dimensions are approx 45cm by 15cm at the highest point. Price is for a pair.
Brand:
Quintrex
SKU: 268048
X
Quintrex Large Bung
$6
$6
Quintrex large 38mm screw in bung. Supplied as bung only and does not include surround. Note: For best sealing results put a smear of grease on the black O-ring before screwing bung into boat.
Brand:
Quintrex
SKU: 645
X
Quintrex Large Bung and Housing
$8
$8
Quintrex large 38mm screw in bung and housing.
Brand:
Quintrex
SKU: 635
X
Quintrex Latest Logo Decal - 2 Sizes - Each
$29.95
$29.95
This is the latest boat decal in their new logo design. Its individual lettering on a backing then when applied to the hull you peel off the front protective sheet. Dimensions are 440mm by 55mm for the small and 640mm by 80mm fir the large. This is the dimensions of the overall lettering when applied to the hull. Price is for one only.
Brand:
Quintrex
SKU: 268101
X
Quintrex Lean Seat Pedestal
$145
$145
Same specs as the standard Quintrex seat pedestal except its 900mm long. (Whilst not shown in main picture, it comes with the black plastic end cap as per the normal pedestal)
Brand:
Quintrex
SKU: A_PED004
