accessories

The most popular of all anchors. With a heavy duty hot galvanised finish they are suitable for mud or sand. The anchor size refers to the approximate weight in pounds (lb). Make sure you choose the right size for your boat.
4lb - Boats up to 3 mtrs
6lb - Boats up to 4 mtrs
8lb - Boats up to 5 mtrs
10lb - Boats up to 6 mtrs
13lb - Boats up to 7 mtrs

This is what we use for the safety gear packs for all of our boats. Available in 3 sizes they come with 50mtrs of rope in the correct size, 2 gal shackles, stainless eye in the end of the rope and the correct amount of chain.
6lb kit - 50m by 6mm rope and 2m by 6mm chain.
8lb kit - 50m by 8mm rope and 4m by 8mm chain.
10lb kit - 50m by 10mm rope and 4m by 8mm chain.

Santorini 350mm steering wheel with brushed aluminium spokea and a polyurethane grip with inserts. It's 350mm diameter and the offset is 55mm to the back of the grip from the dash and 85mm to the front of the grip. It is supplied with the hub which suits any 3/4 inch tapered shaft and then is adjustable via the 6 hex head bolts so it can be rotated for easy wheel alignment.

SARCA is the first Sand And Rock Combination Anchor that actually works. The Hoop on the rear of the anchor ensures that the Super SARCA rolls over in most situations, allowing the toe to be in its best possible position to penetrate the ocean floor and reducing dragging as the fluke digs in. They incorporate an automatic reset trip release that offers you the highest rate of recovery from rocks. When anchoring in and around bommies, reef or coral the Super SARCA has less chance of getting stuck and will create less damage to the environment. If snagged, you tie off the rope and as you drive over the anchor the shackle slides up the shaft to pull the anchor out backwards. Make sure you always use a stainless shackle though so it slides easy. Use the table in the picture to work out the correct size for your vessel.

The next in the range is the 1000. Everything in the main picture is supplied in the box. The 2nd picture is the dimensions of the complete winch. The last picture shows what length of chain and rope it comes with. Below if needed is the Hawse pipes, bow sprits, genuine Savwinch anchors and wiring loom kits. CLICK HERE for the full installation manual for all models.

The largest in the range is the 1500. Everything in the main picture is supplied in the box. The 2nd picture is the dimensions of the complete winch. The last picture shows what length of chain and rope it comes with. Below if needed is the Hawse pipes, bow sprits, genuine Savwinch anchors and wiring loom kits. CLICK HERE for the full installation manual for all models.

The Savwinch Signature Series (SS) is their premium range of Drum Winch and is what we fit on all our trailerboats. As we fit them inhouse, we genuinely know what we are talking about and are only a phone call away if advice is needed. They feature a complete stainless steel motor, designed locally and exclusively for Savwinch. Machined to fine tolerances and utilising O ring seals, the SS series motors are IP68 rated and are completely submersible without the use of sealants or glues. You no longer need to be concerned about water ingress or corrosion. The motors can be moved into 12 different positions to ensure that each Drum Winch can be installed on almost any vessel.

Once you select the correct size for your boat, the winch is generally mounted on the rear of the anchor locker, provided it is strong enough and reinforced with the backing plate on the inside of the boat. If you have an aluminium boat like a Quintrex with a roto moulded anchor well then just purchase the plate below and still mount the winch inside the anchor locker but bolt it to the plate upside down and bolt the plate across the top of the anchor well. They can also be mounted just on top of the deck. Check out all the pictures as one of them shows the different mounting options and what extra may be needed. The only one its doesn't show is when you mount the winch upside down to the custom plate below that is bolted across the top of the anchor well. (What we use on Quintrex and Stacer boats)

Everything in the main picture is supplied in the box. The 2nd picture is the dimensions of the complete winch. The last picture shows what length of chain and rope it comes with. Below if needed is the Hawse pipes, bow sprits, genuine Savwinch anchors and wiring loom kits. CLICK HERE for the full installation manual for all models.

The next in the range is the 880. Everything in the main picture is supplied in the box. The 2nd picture is the dimensions of the complete winch. The last picture shows what length of chain and rope it comes with. Below if needed is the Hawse pipes, bow sprits, genuine Savwinch anchors and wiring loom kits. CLICK HERE for the full installation manual for all models.

The next in the range is the 990. Everything in the main picture is supplied in the box. The 2nd picture is the dimensions of the complete winch. The last picture shows what length of chain and rope it comes with. Below if needed is the Hawse pipes, bow sprits, genuine Savwinch anchors and wiring loom kits. CLICK HERE for the full installation manual for all models.

Significantly quieten your chain so that you don’t scare away the fish! Our Chain Guard Sock is exclusively manufactured for Savwinch. Made from a custom thick sleeving which reduces almost all of the noise from the chain going over the Bowsprit. The thick custom material stretches over both 6mm and 8mm chain which allows the chain to breathe, ensuring you don’t get any sand/mud/seaweed stuck in the sleeving. Available in 7mtr or 9mtr lengths.  

When you have an anchor well that is not strong enough to bolt the winch to, (like plastic Roto moulded wells on Quintrex and Stacer) then you fit this plate across the top and bolt the winch up to it from underneath. That way the winch is still hidden inside the anchor well. Works best with the 880 winch.

Slider anchors (also known as escape anchors) feature a full sliding ring along the shaft. The advantage of the full sliding action is that it allows you to drive over the top of your anchor, slide your chain down the shaft and pull it out when reefed or caught. Savwinch features the Delta Style design Anchor you’ve known to love. Whilst also having the excellent holding power of a traditional anchor with the added benefit of a Sliding ring. Use the chart below as a guide, if unsure then always go larger. You can get Galvanised and Stainless Steel in each size.

4kg    - Boats up to 4.5m
6kg    - Boats up to 5.5m
7.5kg - Boats up to 7m
9kg    - Boats up to 8m
16kg  - Boats up to 11m
20kg  - Boats up to 15m

Specially designed to fit your Savwinch (will also work on any other winch brand) the Rope and Chain are perfectly spliced together. The rope is pre-stretched and has an extreme breaking strength for even the harshest waters. All chains are short link.

The 316 Stainless Steel Savwinch Signature Bowsprit is designed to secure and house your anchor and suits almost all boats. This is our high end, premium Bowsprit which starts with a large piece of Stainless Steel that is folded, a second piece of Stainless Steel is then welded to the top, which is then polished our to create the perfect Bowsprit. The signature Bowsprit features 3 rollers, which allows for quick and easy anchor retrieval every time. If you look at the 1st picture you can see the 3 axle bolts along the side showing where the 3 rollers are. Dimensions are 78mm X 430mm.

If you don’t have an open Anchor Well and you don’t want to Deck Mount your Drum Winch you will require a Hawse Pipe. A Hawse Pipe gives a nice clean look and ensures the Winch is hidden away within the boat. Made from 316 stainless the small is great for boats under 7mtrs and suits almost all our trailer boats. the large is for boats over 7mtrs. The small has a base of 168mm X 100mm and an opening of 100mm X 48mm. The large has a base of 223mm X 100mm and an opening of 154mm X 48mm.

This product is a cracker. Operating at 70PSI and 20LPM nothing comes close to this deck wash. It can be mounted horizontally or vertically and comes with almost everything you will need. Included in the box is:
* Stainless Steel Deck Wash Pump
* Inline Strainer
* Coiled hose which extends up to 20ft
* Inline fuse and 40amp circuit breaker
* Triger nozzle and 2 quick release hose fittings
* 2 elbow and 4 straight hose fittings to suit 1/2 and 3/4 inch hose.

The Swivel Arm Bowsprit Small is a fixed 316 Stainless Steel Bowsprit perfect for any vessel up to 8m. Featuring a self launching design to ensure your anchor always drops. Universal mounting holes make this easy to install yourself with just a few bolts. If you’re looking for a self launching Bowsprit that not only looks great but performs flawlessly every time, you can’t go past the Swivel Arm Bowsprit. Dimensions are 78mm X 417mm.

The Savwinch Wiring Loom Kit includes twin sheath cable, heatshrink and required terminals. Featuring oversized cable to ensure that you don’t experience any voltage or performance issues. What length you choose will depend on not only the size of your boat but also where you batteries are positioned. 

The Scanstrut Flip Pro Multi is a Dual USB-C & 12V power socket. Combining features of the high-power Flip Pro Max and 12V Power Socket into a beautiful multi-power solution. Dimensions are 75mm by 45mm and depth required is 60mm. Universal fit for any USB-C connectors and is UV resistant, has a 316 stainless hinge and spring, is IPX4 waterproof with the cover closed. Input voltage is 12V system for Power Socket / 12V or 24V for Dual USB C Socket and it has a Red LED running light.

This Scanstrut ROKK charger securely holds and wirelessly charges your phone even in the toughest conditions. Now you can keep your phone in reach, fully charged and ready to go. Installation is simple on any boat, caravan, 4WD or outdoor location. Four screws secure the unit onto any flat surface with a simple installation guide and drilling template. A waterproof cable pass-through completes the IPX6 sealed installation. The Active charger is easy to clean and can be washed down with fresh water. Fits all brands of phones and works with the case still on. Min device size (including case): 120mm. Max device size (including case): 173mm. Full dimensions in the last picture.

This plastic elbow screws on to the thread of the Live Bait tank pickup in place of the wire gauze and makes the tank fill while under way. Good for aeration of the water when on a long trip. NOTE: for best results, when you get the fitting you may need to cut the end at roughly a 45 degree angle so it really jams water up the pipe when underway. 

This is the screw on stainless strainer that fits the threaded tube of the live bait tank pickups. 

Screw on rubber boot designed for 2 and 3 position switches above that have a threaded collar.

Using the same outer scupper valve as above, it has a 75mm threaded shaft that then takes a 38mm hose so you can connect it up to a floor drain as per the picture. Also supplied with the 4 stainless mounting screws. The overall length is 157mm and the cut out hole size is 45mm.