Minn Kota

Waterproof remote is lightweight with intuitive user menus and simplified keypad with four customisable One-Boat Network buttons, three on the keypad and one side button. Program these buttons to functions that fit any fishing style, control connected Talon or Raptor shallow water anchors, Auto Stow/Deploy and Power Trim with RT Instinct and Ulterra models or even mark a waypoint on a connected Humminbird fish finder. Includes Minn Kota lanyard and carabiner and is powered by 2 AA batteries (included).

There are several different types of propellers available for the Minn Kota engines and most will only fit certain engines. Please have a look at the chart in the next picture to work out which prop belongs to which engine.

The Minn Kota Riptide I-PILOT Bowmount has been a popular unit for ages and now comes with a bluetooth hand control with I-PILOT as standard. With I-PILOT and the hand held remote boat positioning becomes automatic. Use Drift Point, set Spot-Lock, record paths, control speed, steering and more all from the palm of your hand. Its available in 55lb 12 volt or 70lb 24 volt thrust both in a 54" shaft length. 

The main features of the RT55 are the new and improved deploy assist lever and the Digital maximizer. DEPLOY ASSIST LEVER - Get optimized saltwater performance with Riptide’s re-engineered electric steer control, new deploy-assist lever, and a host of features that set the standards for power and control. Riptide Powerdrive’s new deploy assist lever puts you in motion and in pursuit of fish quickly and easily. Simply depress the lever to deploy the motor and you’re ready to go. When it’s time to move, it stows easily and securely – ready for action again as soon as you are. DIGITAL MAXIMIZER - Up to five times longer run time on a single charge. Standard on the Riptide Powerdrive Bowmount model.

NO ONE WILL BEAT THIS BUNDLE. You get the RT45 above in a 36" shaft, a 50 AMP Lithium 12v battery as well as the Lithium charger to suit. The battery weighs just 7Kgs and the dimensions are 280mm long by 230mm high by just 100mm wide.

The superior durability and long lasting performance of the all new and improved Riptide is also available for the back of the boat. Available in 4 models, all our transom mount motors are 12 volt and range from 40 to 55 lbs thrust. They feature an enhanced corrosion protection, 'sacrificial anode' system and all the rugged reliability you expect from Minn Kota. With the 'Push to Test' battery meter you get an instant state of charge reading at the push of a button. Rebuilt with an intuitive, easy-to-use design, the all-new Riptide Transom delivers up to 55 pounds of power and precision manoeuverability. With a push-to-test battery meter, the battery-extending power of Digital Maximizer (on select models) and unmatched corrosion protection, Riptide Transom means fish are out of places to hide

Available in 8 configurations, the every faithful Terrova had a recent revamp. What makes Riptide Terrova so popular in Saltwater? How about unlocking more boat control than ever before. Start with Minn Kota’s most advanced GPS trolling system, including Spot-Lock. Top it off with all the thrust you need to take on any water and effortless stow and deploy. That’s what makes this workhorse one of the most trusted, most capable, and most proven motors on the water. Other features include: Stow/Deploy Lever, Advanced GPS Trolling System, Part of the One-Boat Network, Spot-Lock with Jog, Drift Mode, Real-time Battery Monitoring, Digital Maximizer, Indestructible Composite Shaft — Guaranteed for Life and now Mobile App Compatibility.

This replacement sheer pin suits current and superseded Minn Kota motors including the new Quest models. There are two different sized sheer pins. One does engines up to (but not including) 80lbs and the other does 80lb engines and above.

A lot of people buy this so they can mount it on the wall of their garage and then you can hang your Minn Kota bow mount away safely and securely when not in use on your boat. It Suits the Quick release bracket above.

The Minn Kota Stabiliser is designed to reduce bounce on bow-mount trolling motors. It's equipped with a low profile base that allows the stabiliser to be easily folded down or removed when not in use. The pole can be cut down to suit the required height and it suits all RipTide, Ulterra, Terrova and PowerDrive bow mount engines.

The Talon Anchor System is designed to quickly and quietly stop and position your boat in depths down to 15ft – whether you’re fishing saltwater or freshwater, the Talon is the ultimate holding device for stealth fishing. Operating from the boat’s existing battery setup, the Talon vertically deploys its three stage telescopic spike with the wireless remote and without the fish-spooking noise of a traditional anchor. When not in use, the lightweight Talon can be taken off the boat thanks to its standard release bracket or folded away for garaging with the optional tilt bracket. It’s electro-mechanical, cable-driven design, is easy to install with minimal wiring & rigging. A wireless remote is supplied as standard and you can purchase the optional foot control. The Talon is available in 4 sizes with different colour combos for each one. Select  your desired model in the drop down menu to see options. Popular features include: Multiple Control Options: Control Talon from anywhere on the boat using your choice of options: Control Panel, Wireless Remote, Foot Switch, i-Pilot or i-Pilot Link Remote, Mobile App or right from the Humminbird fish finder. Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), and standard (normal anchoring). Built-in Work Light: Illuminate the boat transom any time of day — or night. Includes two colors (white and blue) and each has three brightness intensity settings. Indestructible Anchoring Spike: Strong and flexible composite anchor spike backed with a lifetime guarantee and the Vertical Deployment keeps the Talon out of the way of your fishing lines.

You may look at the picture and think these are a rip off but do yourself a favour and check them out online and watch the videos and you will appreciate that they are a really good piece of engineering and quite large. There is a universal version that bolts on to the side of the outboard jacking plate if your have one. Otherwise you get the Port or Starboard one. It will all make sense when you do some homework on the Minn Kota or BLA website.

The Minn Kota Talon tilt bracket is made from marine grade, anodized aluminum and accommodates for low clearance areas and boat storage. Features adjustable deck support for added stability while tilting.

Take a spare with you on that long trip. Designed to deliver optimal power, torque and efficiency its designed to work exclusively with QUEST Series motors. Includes prop pin, nut and washer. Suits all Terrova Quest and Instinct Quest 60″, 72″, 87″ and 100″ shafts.

Manual Deploy Terrova QUEST is here. No longer do you have to choose between a 24v or 36v motor as they are now one and the same. Just choose your shaft length and colour and then simply use a 24v or a 36v battery and you will get 90lbs of thrust from the 24v battery and 115lbs of thrust from the 36v battery. All engines now have a built-in heading sensor. Riptide Terrova QUEST is the hardest working first mate you’ll meet. One that doesn’t take breaks and doesn’t know the meaning of the term “day off”. With available shaft lengths up to 100”, Riptide Terrova QUEST comes ready to go where other trolling motors wont. The new QUEST series of dual 24/36 volt brushless trolling motors was designed for anglers who demand the best from their equipment – even in the harshest environments. With a reinforced motor and mount, more advanced GPS functionality than ever and even an eco mode to extend battery life, Terrova is ready to tackle the elements and feels right at home on bigger boats than ever before.

QUEST Series: These 24/36V dual-voltage brushless motors have been completely re-imagined from the ground up with updates to mounts, propellers, lift assist systems, drive motors and software – taking the world’s greatest trolling motors and redesigning them to outperform everything else on the water for years to come.

Allows mounting on lower unit of bow or transom-mount motors. Rugged, durable construction. Fits transducers of all major manufacturers.

One size fits all. Actually a very comfortable cap to wear.

The Railblaza adjustable height stabiliser can be offset inboard or outboard to suit the alignment of your Trolling motor shaft. It is height adjustable in almost any angle and the flexible strap holds the shaft captive to avoid vibration on-road or on water. Max height from the deck of boat to the centre of the electric engine shaft is approx 31cm. It can be removed to create a clear deck when Trolling motor is in use and will fit any StarPort mount to suit your application (ordered separately) Suits all Garmin and Minn Kota RipTide, Ulterra, Terrova and PowerDrive bow mount engines. Note: The top can be twisted and then locked to line up correctly with the shaft.

The Railblaza StarPort deck mount base is available in either black or white and suits the stabiliser above. It can be used with or without the mounting color and is supplied with stainless steel mounting bolts and screws so you can just use what suits best.

The Railblaza Trolling Support Motor Kit provides a secure support for trolling motor shafts while travelling. The fixed extender gives you the correct height off the deck and the G-Hold gives tight retention for the trolling motor shaft. The support can be removed from the StarPort when not used, clearing the deck for fishing. Other mounts are also available if the StarPort is not suitable for the application. The height from the deck of the boat to the middle of the bow mount electric engine shaft is approx 18cm. Suits all RipTide, Ulterra, Terrova and PowerDrive bow mount engines. Note: The top can be twisted and then locked to line up correctly with the shaft.

The Railblaza RailMount is a practical and simple-to-use mount, allowing the easy attachment of Railblaza accessories, and many other accessories. The RailMount simply fits around any rail and screws together for a firm fit. There is no need to drill holes so it can easily moved to a different spots if necessary. The RailMount 19-25 suits rails 19 to 25mm and the 32-41 suits the larger 32 to 41 mm rails. All RailMounts come complete with adapters, rubber grips, self-adhesive grip tape and the necessary stainless steel mounting screws.

This is the replacement rubber strap for the 2 RailBlaza MinnKota or Garmin head supports above. Its sold as a pair and is approx 100mm long

The RAM tough claw with round base consists of the small Tough-Claw base, double socket arm and round 6cm base adapter. The Tough-Claw can be clamped on rails from 0.625" - 1.5" outer diameter and the overall maximum height from the bottom of round base (deck of boat) to the shaft is approx 25cm. The round base adapter contains the industry standard universal hole pattern, which will connect to a large variety of RAM Mount and third party cradles or just screw it straight down to a flat surface. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm thus allowing for almost infinite adjustment. Suits all Garmin and Minn Kota RipTide, Ulterra, Terrova and PowerDrive bow mount engines.

This is the genuine Minn Kota replacement strap for the head stabiliser above.