X

2nd Base for Removable Cockpit Table

$59.95

Why not have a table position up the front in the bow rider section as well as down the back? This is the same table base and specs as above. 
Brand: Quintrex
SKU: RWB4905
X

450mm Flipper Guide Kit - Pair

$135.00

If you have a trailer with just the cotton reel roller at the rear and your sick of having trouble lining it up with the keel then this is a must. It comes as a pair and suits any trailer that has 50mm by 50mm (2 inch by 2 inch) cross member. It's super easy to fit but make sure you line up the end of the blue skid so it overhangs the keel roller by about 5mm to 10mm so the keel of your boat cannot go anywhere but to the centre of the roller. Note: You don't adjust the skids up to touch the bottom of the boat, they are there to slip the keel down onto the keel roller and are not designed to take any of the boat weight. Also when drilling the pivoting bolt through the skid make the inner length longer than the outer length (like in the picture) so the skids always flop towards and slightly on top of the keel roller. IF YOU DRILL EXACTLY IN THE MIDDLE THEN WHEN IMERSED IN THE WATER THE SKID CAN FLOP OUTWARDS.
Brand: Quintrex
SKU: A_SK450
X

450mm Gluider Guide Kit - Pair

$185.00

This is the exact same product as the flipper kit above except it comes with a 2nd set of longer arms so that you can have it at a fixed angle. It comes as a pair and suits any trailer that has 50mm by 50mm (2 inch by 2 inch) cross members. It's super easy to fit but make sure you line up the end of the blue skid so it overhangs the keel roller by about 5mm to 10mm so the keel of your boat cannot go anywhere but to the centre of the roller. Note: You don't adjust the skids up to touch the bottom of the boat, they are there to slip the keel down onto the keel roller and are not designed to take any of the boat weight. 
Brand: Quintrex
SKU: A_SK450GK
X

500mm C Section Plastic Skid

$16.50

This heavy duty C section blue skid fits on the rear trailer guides. It is approx 500mm long and is riveted into place (rivets not supplied). The internal dimensions of the C section are approx 45mm wide and 15mm deep either side. It is supplied as one only so if you need to do both then make sure you order 2.
Brand: Quintrex
SKU: 565308
X

Hunky Plug Quintrex Ski Pole/Cutting Board/Seat Insert

$5.00

Replacement cap for black insert for where the ski pole, cutting board and spiggot seats slip in.
Brand: Quintrex
SKU: 160961
X

Plastic Pedestal End Cap - 50mm

$5.00

This 50mm black plastic end cap fits into the end of the Quintrex and Stacer pedestal seat poles. Note: Total diameter of cap is 50mm and it suits a 42mm inside diameter tube. 
Brand: Quintrex
SKU: 160960
X

Quintrex 13" White Mudguard - each

$59.95

This is the genuine 13" Meher white mudguard to suit almost all Quintrex and Stacer trailers. Just check that your wheels are 13" (will be on the side wall of the tyre). Price is for 1 only.
Brand: Quintrex
SKU: 545005
X

Quintrex 19mm Skin Fitting

$12.50

This 19mm white skin fitting suits the Quintrex anchor well outlet and most smaller bilge pump outlets. 19mm is the inside diameter of the hose that joins to the skin fitting.
Brand: Quintrex
SKU: 401671
X

Quintrex 400G Etch Primer Spray Can

$29.95

This is a Quintrex/Stacer etch primer and is designed to be used with the Quintrex spray paint when you are painting over bare aluminium. 
Brand: Quintrex
SKU: 190017
X

Quintrex 400G Touch Up Spray Can

$29.95

Referred to as 'Telwater White', this is the genuine Quintrex spray paint. Suits 2014 models to current. 
Brand: Quintrex
SKU: 190042
X

Quintrex 7 Pin Trailer Plug with 1mtr lead and joiner

$29.95

This is a replacement 7 pin trailer plug with a prewired 1mtr lead that plugs in to the rest of the trailer wiring.
Brand: Quintrex
SKU: 535081
X

Quintrex Alloy Bow Roller

$55.00

Replacement Quintrex alloy bow roller assembly with black nylon bow roller and spring loaded locking pin. Dimensions are 200mm overall length and the base plate is 120mm long. The width is 55mm.
Brand: Quintrex
SKU: 161125
X

Quintrex Alloy Cutting Board

$699.00

This is the most common Quintrex cutting board that we use and suits all Quintrex boats that have the plastic rear insert.
Brand: Quintrex
SKU: TCB08
X

Quintrex Anchor Light Base

$39.95

Replacement Quintrex anchor light base.
Brand: Quintrex
SKU: 160505
X

Quintrex Angler Sport Seat

$245.00

This is the current fold down Angler Sport seat in the Quintrex boats. Note: Price is for ONE only and does NOT include the pedestal. 
Brand: Quintrex
SKU: 210810
X

Quintrex Apex Sport Seat

$550.00

This is the current Apex Sport seat in the Quintrex Apex hull boats and it has the flip up bolster at the front. Give your boat a face lift today. You can also fit one or both of them with the slider to suit. Note: Price is for ONE only and does NOT include the pedestal. 
Brand: Quintrex
SKU: 210815
X

Quintrex Black Plastic Angled Rod Holder

$10.00

Genuine Quintrex black plastic angled rod holder. Has an oval top with 3 countersunk screw holes.
Brand: Quintrex
SKU: 160915
X

Quintrex Bolt on Seat Slider

$139.95

If you have a seat pedestal that has the 4 mounting screws at the top (like in pictures above) then why not convert you seat so that it slides forward and back? You just fasten the top half to your seat base using the existing screws and then bolt the other half to the top of your pedestal. (Bolts/Nuts not included)
Brand: Quintrex
SKU: 182102
X

Quintrex Burley Bucket Kit - Medium

$145.00

This Quintrex medium burley bucket kit suits the standard maxi bracket and is supplied with the aluminium muncher. See diagram for dimension. Measurement in picture is 285mm.
Brand: Quintrex
SKU: A_BURB002
X

Quintrex Burley Bucket Kit - Small

$145.00

This Quintrex small burley bucket kit suits the standard maxi bracket and is supplied with the aluminium muncher. See diagram for dimension. Measurement in picture is 245mm.
Brand: Quintrex
SKU: A_BURB001
X

Quintrex Burley Bucket Muncher

$34.95

Quintrex alloy burley bucket muncher.
Brand: Quintrex
SKU: 161201
X

Quintrex Catch and Release Replacement Handle

$19.95

Replacement black nylon handle for the Quintrex Catch and Release trailer system above. It's approx 100mm long and 30mm diameter and is slightly tapered each end.
Brand: Quintrex
SKU: 161112
X

Quintrex Catch and Release Trailer Latch

$495.00

Exclusive to Quintrex, this is a fantastic product and allows you to launch and retrieve your boat on your own with ease. We put it on almost all of our stock boats now as standard as we know people will want it. It comes with both parts and can be retro fitted to most older boats and trailers. Note: The gap between the two arms that hold the bow roller must be 100mm as per image attached. If your gap is 75mm then this unit will not work.

CLICK HERE
to watch a great short video on the Catch and Release in operation.

Note: CLICK HERE for fitting instructions when you receive the unit. None are supplied in the box when shipped.
Brand: Quintrex
SKU: 161117
X

Quintrex Cockpit Light

$19.95

Quintrex LED Flush mounted cockpit light.
Brand: Quintrex
SKU: 161060