See more: New Boats
MAC 210 Dinghy
Packages from
$1,770.00
$1,490.00
for boat only or $2,990 for package with 2.5hp Yamaha 4 stroke outboard. Price also includes our exclusive 6 year Yamaha engine warranty.
$1,770.00
$1,490.00
Brand:
Smartwave
SKU: NEWBO23813
People rating: 2
Hull length (metres): 2.10
Width (metres): 1.3
Maximum HP: 3
Categories:
New Boats
We always have these stacked high in the showroom and ready to go. Weighing just 30kgs, the MAC 210 is rated to 3hp and is a great little tender or dinghy which is lightweight and yet very stable. You can easily transport a MAC 210 on a roof rack, camper van or even carry it up the beach. It's ideal for rowing or motoring to your mooring, but it is just as much fun playing on the water. It is a single skinned model making it extremely light weight and easy to handle and transport. Its extremely stable and very kid friendly. Colour choices are white, red, green, blue, grey and orange. Features include 3 seating positions and 2 rowing position.
You might also like
X
Sale
Chok-A-Blok Strap Guard - Ea
$8
$5
$8
$5
The CHOK-A-BLOK™ strap guard protects both the cargo and the webbing strap, the strap guard can accommodate webbing strap widths from 25mm to 50mm. It can be easily slid along the strap to crucial points of contact. It measures 180mm long and the foam is 13mm thick. Price is for 1 only.
Brand:
Hunts Marine
SKU: CAB-50
X
Sale
Raymarine RS150 GPS Antenna - P/N E70310
$499
$385
$499
$385
The Raymarine RS150 GPS Antenna is a high performance, 72-channel, remotely mounted GPS sensor for Raymarine Navigation systems. The RS150 offers fast 10Hz position updates and enhanced accuracy. It is also a GNSS Receiver and supports the GLONASS global Navigation satellite system.
Brand:
Raymarine
SKU: E70310
X
Sale
Enerdrive 3 Bank Epower Smart Charger 20Amp / 12V
$551
$299
$551
$299
Suitable for GEL, AGM, Flooded and Lithium batteries. The Enerdrive ePOWER 20A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently. As dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging. Our ePOWER multistage smart 20A battery charger deliver four primary charge stages:-
Stage 1 – Bulk or Boost Charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery capacity is recovered as fast as possible.
Stage 2 – Absorption Charge; With the charger voltage held steady the remaining 20% is replaced allowing the current to drop as the battery approaches its full charge.
Stage 3 – Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged while supporting any additional loads connected to the battery, such as DC lighting and refrigerators. This stage allows for the charger to be used as a DC power supply.
Stage 4 –Maintenance; This stage is a regular timed “return to bulk” stage. After 7 days of constant operation in “float” the Enerdrive ePOWER Battery Charger will switch the charger from float to bulk to agitate the batteries electrolyte helping to provide an extended service life.
Stage 1 – Bulk or Boost Charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery capacity is recovered as fast as possible.
Stage 2 – Absorption Charge; With the charger voltage held steady the remaining 20% is replaced allowing the current to drop as the battery approaches its full charge.
Stage 3 – Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged while supporting any additional loads connected to the battery, such as DC lighting and refrigerators. This stage allows for the charger to be used as a DC power supply.
Stage 4 –Maintenance; This stage is a regular timed “return to bulk” stage. After 7 days of constant operation in “float” the Enerdrive ePOWER Battery Charger will switch the charger from float to bulk to agitate the batteries electrolyte helping to provide an extended service life.
Brand:
Hunts Marine
SKU: EN31220
