X
Brass Screw in Boat Bung
$10.00
Brass screw in bung to suit most American boat brands.
Brand:
Hunts Marine
SKU: 400367
X
Fold Down Drink Holders
$8.50
Available in White, Grey or Black these fold down drink holders with flip up adjustable arms will fit any boat or installation. Mounting dimensions are 100mm by 100mm and when folded up they only 25mm thick.
Brand:
Hunts Marine
SKU: RWB479
X
Ronstan Threaded Bung
$3.00
The most popular threaded bung on the market. It has a flat edged thread.
Brand:
Hunts Marine
SKU: RF738
X
Removable Cockpit Table
$199.00
There is no original Quintrex cockpit table as they just come from 3rd party suppliers but this is the most common one and the one we use in all our other boats. The tables are made from UV stabilised high impact plastic and the pedestals are silver anodised aluminium. The thread-lock pedestal system allows the table and pedestal pole to be quickly and easily removed from the base for storage. The thread lock also includes a ratchet lock mechanism for very steady and secure mounting. This is a really easy table to fit as the base only needs to be screwed down to the floor and you don't need to recess a big hole in the middle. The base only sits up about 15mm and is tapered on the sides so you cant kick your feet on it either. The base diameter is 180mm, the pole is 680mm high and the table top is 760mm long by 460mm wide.
Brand:
Quintrex
SKU: W4903
X
Scupper Valve 70mm
$9.95
Used on the rear of a lot of boats and on the sides of quite a few Quintrex models, it has a white polypropylene outer ring with a rubber flap that opens to let water out then seals to prevent water getting back in. It's supplied with the 4 stainless mounting screws. The outer diameter of the white ring is 70mm and the drain hole size is approx 40mm.
Brand:
Hunts Marine
SKU: RWB1431
X
Large Recessed Drink Holder - Black or White
$10.00
Available in Black or White these drink holders have 2 internal sizes to suit either a wine bottle or can snugly. Cutout size is approx 90mm and then there is an 8mm lip. Depth is 90mm. They have a small 1/4 inch drain fitting on the base so they can be plumbed out the sides or internally if required.
Brand:
Hunts Marine
SKU: RWB470
X
Small Recessed Drink Holder - Black or White
$9.00
Available in Black or White these drink holders suit cans and smaller bottles. Cutout size is approx 70mm and then there is an 8mm lip. Depth is 75mm.
Brand:
Hunts Marine
SKU: W466
X
Utility Storage Box with Waterproof Lid
$65.00
White plastic flush mounted heavy duty glove/storage box with waterproof lid. Outer lid dimensions are 245mm wide and 120mm high and the depth of the box is 165mm.
Brand:
Hunts Marine
SKU: W5130
X
Rectangular Elastic Net Holder - 2 Sizes
$29.95
With a plastic surround that's easily mounted with 5 screws and an elastic net in between this is great for storing mobile phones, sunglasses etc. Dimensions are 180mm by 375mm wide for the smaller one and 210mm by 415mm for the larger one.
Brand:
Hunts Marine
SKU: RWB5373
X
Stainless Steel Transom U Bolts - 5 Sizes
$6.00
304 grade stainless U bolts with crimped shaft for all transom mount applications. Comes with cross plate, 2 washers and 2 nuts. They are available in 5 sizes: Click on Product Name above to see full details of fitting and sizing to suit your boat.
Brand:
Hunts Marine
SKU: RWB2413
X
6 inch Inspection Ports - Black, White or Clear
$24.95
New Zealand made quality 6" Nairn inspection port with flush lid with 2 finger grips. available in all white, all black, clear lid with white surround or clear lid with black surround.
Brand:
Hunts Marine
SKU: RWB4113
X
Black Nylon Cleats - 4 Sizes
$3.00
Used on a lot of boats, particularly aluminium boats, these cleats are made of a strong black UV resistant nylon material. They have a flat base with two central fastening holes through the cleat posts.
Brand:
Hunts Marine
SKU: RWB950
X
Hatch Support Spring - Stainless Steel
$14.95
The Stainless Steel hatch spring holds hatches open when straight then simply push spring sideways to release and close the hatch. Also useful for tables leaves, ice box lids etc. The ends pivots and rotate to allow a variety of mounting positions. Total length 260mm
Brand:
Hunts Marine
SKU: W1364
X
Large Battery Tray with Hold Down
$14.95
This heavy duty black plastic battery tray with hold down suits batteries up to 315mm by 170mm.
Brand:
Hunts Marine
SKU: W658
X
25mm Stainless Hand Rails - 5 Sizes
$20.20
Available in 5 lengths from 229mm to 762mm these Stainless Steel Handrails are made from 316 grade mirror finish 25mm diameter stainless steel tubing. Each end has a Marine-grade nylon base and they come with the mounting stainless bolts, nuts and washers.
Brand:
Hunts Marine
SKU: MA025-9
X
304 Grade Stainless Folding Drink Holder
$49.95
Finally there is a really good solid top quality stainless steel folding drink holder. Made from 304 grade stainless it has spring loaded adjustable arms to grab and can or bottle size (48mm to 91mm) and has a foam coaster on the base on the inside so there is no vibration when the boat is underway. Its supplied with 2 mounting screws and when folded up the dimensions are 100mm by 105mm by 15mm.
Brand:
Hunts Marine
SKU: 37478
X
Barwig Singlet Faucet with Built in Switch
$39.95
Rated up to 35PSI this is a popular single adjustable faucet which is used on most boats. It has an in-built switch in the tap. Just turn the top and your good to go.
Brand:
Hunts Marine
SKU: 005953
X
Stainless Steel Folding Telescopic Ladder - 2 Sizes
$89.95
These telescopic folding 316 stainless ladders are what is used on a lot of the Quintrex boats and are designed to bolt on to a swim platform. The 2 rung is 290mm wide, 335mm when retracted and 600mm when extended. The 3 rung is 295mm wide, 370mm when retracted and 850mm when extended. They come with a velco strap to hold the steps together when retracted.
Brand:
Hunts Marine
SKU:
X
Scupper Valve - Thru hull
$24.95
Using the same outer scupper valve as above, it has a 75mm threaded shaft that then takes a 38mm hose so you can connect it up to a floor drain as per the picture. Also supplied with the 4 stainless mounting screws. The overall length is 157mm and the cut out hole size is 45mm.
Brand:
Hunts Marine
SKU: RWB1430
X
Deluxe Glove Box - Black or White
$65.00
Available in Black or White, this lockable glove box has an attractive textured finish and 2 inbuilt drink holders in the fold down lid. It's supplied with 6 stainless mounting screws. Lid dimensions are 340mm wide and 135mm high and the box is 153mm deep. Cutout size required is 300mm by 100mm.
Brand:
Hunts Marine
SKU: RWB652
X
Small Recessed Drink Holder - Stainless Steel
$49.95
This stainless steel recessed drink holder has an internal diameter of 70mm to suit all canned drinks and is 40mm deep.
Brand:
Hunts Marine
SKU: 194106
X
Small Battery Tray with Hold Down
$12.95
This heavy duty black plastic battery tray with hold down suits batteries up to 280mm by 170mm.
Brand:
Hunts Marine
SKU: W657
X
Stainless Steel Battery Tie Down
$29.95
Stainless Steel Battery tie down. Maximum battery height 215mm and minimum height 160mm, maximum width 190mm. 4mm countersunk mount screws.
Brand:
Hunts Marine
SKU:
X
85mm Flush Air vent with 75mm Tail - Black or White
$9.00
85mm plastic square air vent available in either black or white with a 75mm tail to suit bilge blower hose.
Brand:
Hunts Marine
SKU: RWB1665
