Online Accessories Store

Available in 2 sizes, its made from heavy duty 304 grade pressed stainless steel and has a 50mm black nylon roller. The quick release captive pin retains your rope and chain on the roller and both come with 3 by 6mm c/sunk mounting holes. The small has a total length of 195mm and a base length and width of 100mm by 55mm. The large has a total length of 220mm and a base length and width of 125mm by 55mm.

This large sized vented marine battery box is fully portable with its soft grip carry handle, has 2 by 20mm cig power sockets with covered caps and wired 10amp fuse, pre-wired positive and negative terminals on exterior of the box with a 30 amp fuse on the positive power connection, it has a battery condition indicator built into the lid and also comes with a battery strap and fastening hardware. Just put your own battery inside and you are good to go. The outside size including lid and handles is 410mm L by 230mm W by 300mm H and the inside size to take a battery is 340mm L by 190mm W by 225mm H.

Made from stainless steel, the oval Hawse hole is 160mm long by 115mm wide by 34mm high and has a throat diameter of 105mm by 52mm. The lid is permanently attached with a security chain and the cutouts in the lid and base fits into the anchor chain to hold the lid down.

Hand polished marine grade 316 stainless steel hawse pipe is perfect for cuddy cabs, centre consoles or bow riders with very small anchor wells. The rope and chain simply comes straight up through the deck and out to the bow roller. Opening Dia:76mm H: 140mm D: 140mm

These trim and fly screens fit perfectly in the appropriate hatch and are an absolute must if you are going to be overnighting and want to leave the hatch open to get some fresh air. You will get eaten alive by mossies otherwise. Use the chart in the other picture to make sure you get the correct one.

Sold as a pair (Port and Starboard), These fairleads come in 2 sizes and are made of a UV resistant black nylon.

This heavy duty transom ski ring is made from stainless steel and is through deck bolted. The thread length is 50mm and it is supplied with the mounting plate, washers and nuts. The distance between the two bolts is 54mm centre to centre.

New Zealand made quality 5" Nairn inspection port with flush lid with 2 finger grips. available in all white, all black, clear lid with white surround or clear lid with black surround.

This stainless steel drink holder with 3 blue LED lights inside has 2 internal sizes to suit either a wine bottle or can snugly. Cutout size is approx 90mm and then there is an 8mm lip. Depth is 90mm. They have a small 1/4 inch drain fitting on the base so they can be plumbed out the sides or internally if required.