Online Accessories Store

- Anchoring/Mooring/Ropes
- Boat Maintenance
- Canopies and Covers
- Electrical
- Engine Accessories
- Evinrude Johnson Service
- Fishing Accessories
- Galley ×
- Gift Card
- Hardware
- Lighting
- Mercury Mercruiser Service
- Minn Kota
- Miscellaneous
- Pumps and Plumbing
- Quintrex Genuine Parts
- Safety Gear
- Seating
- Steering
- Suzuki Service
- Trailer Service Items
- water sports
- Yamaha Service
X
Stainless Steel Cast Folding Eye Plate - 2 Sizes
$23.50
Made from cast 316 grade stainless steel, the pad eye folds down after use. 2 piece construction with a cast base with 3 x countersunk fastening holes and cast folding dee ring. Click on the pictures for further dimensions.
Brand:
Hunts Marine
SKU: RWB2618
X
Stainless Steel Folding Eye Plate - 2 Sizes
$18.99
Made from 304 stainless steel they have a 2 piece body and dee ring that folds down and is only 14mm high when not in use. The overall dimensions of both are 65mm by 50mm and you can have either a 6mm by 40mm dee ring or a 8mm by 40mm dee ring.
Brand:
Hunts Marine
SKU: RWB2424
X
Stainless Steel Ring Plates - 2 Sizes
$8.75
Made from 304 stainless steel they have a welded eye and welded ring and 4 by countersunk holes drilled. Click on the 2nd picture to see the dimensions of each one. Note: the SWL is approx 25% of ultimate breaking load.
Brand:
Hunts Marine
SKU: RWB2418
X
Stainless Steel Eye Plates - 2 Sizes
$4.15
Made from 304 stainless steel they have a welded eye and 4 by countersunk holes drilled. Click on the 2nd picture to see the dimensions of each one. Note: the SWL is approx 25% of ultimate breaking load.
Brand:
Hunts Marine
SKU: RWB2420
X
Long Base Stainless Steel Folding Ladder - 3 Sizes
$141.00
With the short base ladders above, the gap between the top and bottom mounting arms is 275mm whereas with the 3 long base ones the gap is 430mm. You also get the choice of 3, 4 or 5 rung. All other dimensions and specifications are identical to what is above. There is dimensions in the last picture that shows the extended and retracted heights.
Brand:
Hunts Marine
SKU: MA033
X
Short Base Stainless Steel Folding Ladder - 2 Sizes
$107.00
The Oceansouth Short Base Stainless Steel Folding ladder is designed to cater to boats with shorter transoms. It is available in two different sizes to accommodate your specific needs. With spacings of 260mm between the nylon steps and a ladder width of 290mm, they provide a comfortable and secure boarding experience. Crafted from 316-grade stainless steel fasteners and 25mm tubes, and finished with a high-polish shine, these ladders offer not only strength and durability but also an attractive appearance that complements your boat’s aesthetics. There is dimensions in the last picture that shows the extended and retracted heights and the gap between the top and bottom mounting arms is 275mm.
Brand:
Hunts Marine
SKU: MA031
X
Deluxe Adjustable Height Cockpit Table with or without Soft Top Matting.
$415.00
Available with and without the soft matting top, this Premium Tabletop paired with the adjustable stowable pedestal is also a great package. One of its key features is the chic acrylic white “gel coat look” that portrays a premium feel. With the quick release pins turn your fishing boat in to an entertaining boat with a simple click and you are ready to serve lunch. Finished with lunch, push the quick release buttons and stow it all away and get back to business trying to land the big one! The table top is 740mm wide by 460mm deep and has 4 recessed cup holders. The good thing with this base is it just screws down to the floor and you don't need to to have any cutout for the pole. The pole just screws on to the base.
Pedestal:
• 540mm - 710mm in height.
• 175mm base.
• Polished aluminium post.
• Slides in 20mm increments.
• Nylon bushes for smooth adjustments.
• Push button release for table mount and base plate
Pedestal:
• 540mm - 710mm in height.
• 175mm base.
• Polished aluminium post.
• Slides in 20mm increments.
• Nylon bushes for smooth adjustments.
• Push button release for table mount and base plate
Brand:
Hunts Marine
SKU: 293984
X
Deluxe Fixed Height Cockpit Table with or without Soft Top Matting.
$317.00
Available with and without the soft matting top, this Premium Tabletop paired with the stowable pedestal is a match made in heaven. One of its key features is the chic acrylic white “gel coat look” that portrays a premium feel. With the quick release pins turn your fishing boat in to an entertaining boat with a simple click and you are ready to serve lunch. Finished with lunch, push the quick release buttons and stow it all away and get back to business trying to land the big one! The table top is 740mm wide by 460mm deep and has 4 recessed cup holders.
Pedestal:
• 760mm in height.
• 177mm base and top mount.
• Extends 50mm (2”) below the deck.
• Anodized finish.
• Requires 88mm (3-1/2”) hole in deck.
• 60mm (2-3/8”) post.
Pedestal:
• 760mm in height.
• 177mm base and top mount.
• Extends 50mm (2”) below the deck.
• Anodized finish.
• Requires 88mm (3-1/2”) hole in deck.
• 60mm (2-3/8”) post.
Brand:
Hunts Marine
SKU: 293982
X
Nylon Jamb Cleat - 2 sizes
$9.95
Made in New Zealand from quality black nylon, these jamb cleats are a great option to quickly tie off fender ropes. They come in 2 sizes to handle different rope thicknesses. The small one takes rope from 3 - 6mm and has a base size of 83mm by 18mm and the large cleat takes rope from 6 - 10mm and the base size is 108mm by 25mm.
Brand:
Hunts Marine
SKU: RWB959
X
Hinged Stainless Bow Roller - 2 Sizes
$159.95
Available in 2 sizes, its made from heavy duty 316 grade pressed stainless steel and has a 50mm black nylon roller. The quick release captive pin retains your rope and chain on the roller and both come with 3 by 6mm c/sunk mounting holes. The small has a total length of 335mm and a base length and width of 105mm by 55mm. The large has a total length of 360mm and a base length and width of 130mm by 55mm.
Brand:
Hunts Marine
SKU: RWB2243
X
Stainless Bow Roller - 2 Sizes
$62.50
Available in 2 sizes, its made from heavy duty 304 grade pressed stainless steel and has a 50mm black nylon roller. The quick release captive pin retains your rope and chain on the roller and both come with 3 by 6mm c/sunk mounting holes. The small has a total length of 195mm and a base length and width of 100mm by 55mm. The large has a total length of 220mm and a base length and width of 125mm by 55mm.
Brand:
Hunts Marine
SKU: RWB2222
X
Powered Battery Box
$94.95
This large sized vented marine battery box is fully portable with its soft grip carry handle, has 2 by 20mm cig power sockets with covered caps and wired 10amp fuse, pre-wired positive and negative terminals on exterior of the box with a 30 amp fuse on the positive power connection, it has a battery condition indicator built into the lid and also comes with a battery strap and fastening hardware. Just put your own battery inside and you are good to go. The outside size including lid and handles is 410mm L by 230mm W by 300mm H and the inside size to take a battery is 340mm L by 190mm W by 225mm H.
Brand:
Hunts Marine
SKU: RWB663
X
Stainless Steel Oval Hawse Hole
$60.00
Made from stainless steel, the oval Hawse hole is 160mm long by 115mm wide by 34mm high and has a throat diameter of 105mm by 52mm. The lid is permanently attached with a security chain and the cutouts in the lid and base fits into the anchor chain to hold the lid down.
Brand:
Hunts Marine
SKU:
X
Viper Pro Series Deluxe Hawse Pipe
$135.00
Hand polished marine grade 316 stainless steel hawse pipe is perfect for cuddy cabs, centre consoles or bow riders with very small anchor wells. The rope and chain simply comes straight up through the deck and out to the bow roller. Opening Dia:76mm H: 140mm D: 140mm
Brand:
Hunts Marine
SKU:
X
Low Profile Aluminium Hatches - 4 sizes with Black Frame
$332.00
The same top quality hatch as above except with a powder coated black frame. These sleek low profile hatches are designed for use on all boats from powerboats, sailboats and large yachts. With a 25mm profile above the deck and as low as 19mm if counter sunk in teak decks, the sleek minimalist lines add style to any vessel. With smoked acrylic glass they utilise a unique heavy-duty anodised aluminium frame. The larger escape hatches are designed with two struts and two twist locks and the smaller ventilation hatches use one strut and one locking lever. Each strut comes standard with a twist lock brace to hold the lid in any position up to 95 degrees. A quick release pin enables the struts to be detached from the frame, allowing the hatch to open to a full 180 degrees.
Brand:
Hunts Marine
SKU: 362006
X
Aluminium Hatch Screens to suit above
$97.00
These trim and fly screens fit perfectly in the appropriate hatch and are an absolute must if you are going to be overnighting and want to leave the hatch open to get some fresh air. You will get eaten alive by mossies otherwise. Use the chart in the other picture to make sure you get the correct one.
Brand:
Hunts Marine
SKU: 36193
X
Nylon Transom Step/Handle
$9.99
Manufactured from high impact black plastic, this little guy has been around forever. It can be used as a large handle or a transom step. Its 160mm long by 42mm wide by 65mm deep.
Brand:
Hunts Marine
SKU: RWB1657
X
Slimline Solid Stainless Bar Cleats - 3 Sizes
$15.95
Attractive, strong and corrosion resistant, these solid bar cleats are made from polished 316 stainless and will last a lifetime.
Brand:
Hunts Marine
SKU:
X
Black Nylon Fairleads - 2 Sizes
$15.95
Sold as a pair (Port and Starboard), These fairleads come in 2 sizes and are made of a UV resistant black nylon.
Brand:
Hunts Marine
SKU: RWB1242
X
Stainless Ski Ring
$39.95
This heavy duty transom ski ring is made from stainless steel and is through deck bolted. The thread length is 50mm and it is supplied with the mounting plate, washers and nuts. The distance between the two bolts is 54mm centre to centre.
Brand:
Hunts Marine
SKU:
X
5 inch Inspection Ports - Black, White or Clear
$18.95
New Zealand made quality 5" Nairn inspection port with flush lid with 2 finger grips. available in all white, all black, clear lid with white surround or clear lid with black surround.
Brand:
Hunts Marine
SKU:
X
Large Recessed Drink Holder with LED - Stainless Steel
$22.95
This stainless steel drink holder with 3 blue LED lights inside has 2 internal sizes to suit either a wine bottle or can snugly. Cutout size is approx 90mm and then there is an 8mm lip. Depth is 90mm. They have a small 1/4 inch drain fitting on the base so they can be plumbed out the sides or internally if required.
Brand:
Hunts Marine
SKU: RWB471
Accessories
- Latest Catalogue
- Electric Engines
- Service Items, Kits & Oils
- Anchoring/ Mooring/Ropes
- Boat Maintenance
- Cabin, Galley & Hull
- Canopies and Covers
- Electrical
- Electronics
- Engine Accessories
- Engine Spare Parts
- Fishing Accessories
- Gift Cards
- Hardware
- Lighting
- Miscellaneous & Gifts
- Pumps & Plumbing
- Quintrex Genuine Parts
- Safety gear
- Sailing
- Seating
- Steering
- Trailer Items
- Water Sports