Online Accessories Store

The Zipwake Pro series contains all the great features of the Zipwake S System above but adds the following.  Zipwake PRO’s interceptors operate five times faster than previous models, delivering a whole new level of performance and precision. Moving from 0 to 30 or 60 mm in just 0.3 seconds, the increased blade speed enables ultra-fast adjustments to changing conditions. Whether you’re facing wind, waves, or shifting loads, Zipwake PRO responds instantly — optimizing trim and stability for smoother, safer, and more accurate control when it matters most. Check out the last photo for what comes in the Box.

A kit box includes all the parts needed to install a dynamic trim control system with one pair of fast acting interceptors. There are 4 different kit boxes, one for each length of interceptor model. The 4 different kits are the different interceptor lengths of 300mm, 450mm, 600mm and 750mm. The two most common kits by far are the 300mm and the 450mm and are the ones used on all our trailerboats including the large Yellowfin plate boats and the CruiseCrafts.

Each kit contains a pair on interceptors with 3mtrs cables on each, the control panel with a 7mtr cable and the distribution unit with a 4 mtr power cable. Dimensions of the control panel and the interceptors are in the pictures.

Made in Sweden, Zipwake is the world's first Dynamic Trim Control System which incorporates a state of the art series of durable, fast acting interceptors, eliminating the well known trim problems of planing and semi planing hulls. The S Series suits boats between 17 to 50 feet. The system is fully automatic and significantly enhances performance, fuel economy, comfort and safety when accelerating and cornering. Thye have a built in GPS, 3D Gyro and 3D Accelerometer. 

A kit box includes all the parts needed to install a dynamic trim control system with one pair of fast acting interceptors. There are 4 different kit boxes, one for each length of interceptor model. The 4 different kits are the different interceptor lengths of 300mm, 450mm, 600mm and 750mm. The two most common kits by far are the 300mm and the 450mm and are the ones used on all our trailerboats including the large Yellowfin plate boats and the CruiseCrafts.

Each kit contains a pair on interceptors with 3mtrs cables on each, the control panel with a 7mtr cable and the distribution unit with a 4 mtr power cable. Dimensions of the control panel and the interceptors are in the pictures.

Dimensions of all 5 tanks are in the last picture. Ranging from 50ltr up to 200ltr, these Plastimo flexible water tanks are strong and reliable and a practical low cost solution to fresh water storage on board. They are flexible, lightweight and form-fitting and so can be installed in compartments where it would not be possible to fit a rigid tank. Double envelope - a water chamber inside a tough nylon outer. Consists of a welded nonporous tasteless NON-BPA PVC water chamber (inner bladder) inside a tough nylon outer. They are completely waterproof and highly resistant to tearing and  abrasion. The inner water bladder can be easily removed from the outer covering for routine cleaning and inspection and replacement inner bladders are available, if required. The tanks include tie-down loops on the corners and all tanks have a 38mm (1 1/2”) hose inlet fitting on the upper side of the tank and a 12mm (1/2”) hose outlet fitting on the underside. The exception is the triangular bow tank where both fittings are located on the upper side. When filled with water all tanks are approx 250mm depth.

A very common product, its a large size woven polyester netting with elastic shock cord all round and nylon corner securing clips. This versatile elastic netting can be used for securing bedding, clothing and cabin items as well as being a great cupboard organiser. Its 2mtrs wide and 600mm high.

The removable Side Mounting Table Pedestal kit is the perfect spacesaver solution for your boat. The Side Mounting Pedestal is made from high-quality marine grade stainless steel. A versatile heavy-duty aluminium mounting bracket can be mounted against any vertical surface making it ideal for all entertainment areas. The Side Mounting Pedestal is perfectly paired with the Premium Tabletop, which attaches to the Pedestal bracket with a pull-pin that locks the Tabletop in place. The pull-pin is easily accessible when you need to remove and store the table. This Tabletop is available in a premium artic white high-gloss surface or the eye-catching contoured Seadek finish. The table top is 740mm wide by 460mm deep and has 4 recessed cup holders.

Pedestal:
• W 365mm x H 350mm.
• Eliminates the need for mounting holes in the deck or cockpit.
• Easily removable when not in use.
• Polished stainless steel finish with anodised aluminium bracket.
• Quick release pin.

Made from bright polished pressed aluminium its ideal for alloy boats. It comes complete with a removable retainer pin and a strong black nylon roller. The base is plain with no holes drilled so you can match any old holes. The base is 120mm by 57mm and the overall length is 187mm.

Stop your rope and chain from damaging your deck and ensure the smooth operation of your anchor winch with these deluxe 5mm plate marine grade 316 stainless steel anchor rollers. They are hand polished to a mirror finish and include our high performance nylon rollers. Best suited for fitment at the edge of your anchor well when installing your electric drum winch.

This heavy duty solid cast 316 grade stainless steel cross bollard has been around forever and is beautifully finished and highly polished. The smaller one has a 60mm by 60mm base with an 87mm cross width and is 90mm high. The larger one has a 75mm by 75mm base with a 110mm cross width and is 115mm high. The smaller unit takes 6mm screws or bolts and the larger takes up to 8mm.

Available in 5 lengths from 260mm to 655mm these Stainless Steel Handrails with wave pattern grip are made from 304 grade mirror finish 25mm diameter stainless steel tubing. The studs are 45mm long with 5/16" thread welded into the hand rail base. All handrails are 60mm in height above the deck. Supplied with locking nuts.

This solid heavy duty cast stainless handle is made from 316 grade stainless steel. It's 145mm long and 43mm high and has 4 by 5mm countersunk fastening holes

Available in 4 lengths from 229mm to 610mm these Stainless Steel Handrails are made from 316 grade mirror finish 19mm diameter stainless steel tubing. Each end has a Marine-grade nylon base and they come with the mounting stainless bolts, nuts and washers.

155mm long, the low profile heavy duty cast stainless steel fold away cleat is now used on many brands of boats we sell including CruiseCraft. It simply folds down when not in use to create an extremely smooth non-obstructing deck fitting with low profile appearance. Indented finger lift for easy retrieval, simply push to fold away. Height when folded down is just 10mm.

This stainless pennant / flag pole clamps to your rail and is 330mm long and split rings to attach your pennant. To suit rail size 22 to 25mm.

Attractive, strong and corrosion resistant, these solid bar cleats are made from polished 316 stainless and will last a lifetime.

Sold as a pair (Port and Starboard), These fairleads come in 2 sizes and are made of hollow cast 316 stainless.

This is the one and only ski hook on the market and has been around since boating began. Its a one piece stainless hook and bolt that passes through a chrome plated bronze base and is fitted with a wire safety lock to prevent accidental disconnection. The 5/16" (8mm) screwed shank measures 2 3/4" (70mm) from under the base.

New Zealand made quality 4" Nairn inspection port with recessed lid with 4 finger grips.

New Zealand made quality 4" Nairn inspection port with recessed lid with 4 finger grips.

Flat edged popular screw in bung with plastic housing.

Made from polished 304 grade stainless they have raised "V" style louvres and are ideal for engine room venting. The 3 louvre air vent has outer dimensions are 210mm by 113mm with a cut-out of 187mm by 90mm and the 5 louvre vent has outer dimensions of 325mm by 113mm with a cut-out of 303mm by 90mm.

Adjustable chrome plated hatch arms. One end had a ball joint and the other has swivel base so the arm will fit almost any application. Available in 2 sizes with the overall lengths being 275mm to 455mm and 350mm to 600mm.

Reinforced 3/8th shower hose line to suit shower nozzles above. The other end will thread on to most of the common pressure pumps. Available in the 2 lengths of 3m and 5m.

This recessed shower container will suit both the round and square headed shower nozzles above. It comes with the base gasket to seal the unit to the hull and also has a waterproof opening lid with O ring.

This is another very common shower head on/off nozzle. It has a round shower rose that is adjustable for the required water flow. Fits the hoses and housings below.