24V 30A Battery Charger - Suits all Battery Types
$941.00
$450.00
Suits Gel, AGM, Flooded and Lithium batteries. Charging up to 3 seperate battery banks at once, the Enerdrive Dometic 30A AC Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently. Main features include: Multistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks, Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three, Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3, Current Control: User adjustable current output (e.g. Dial the 30amp unit back to run off a 1kVA generator), Smart Charging: The Enerdrive | Dometic 24V 30A AC Battery Charger will regulate its output based on the loads connected to your battery banks, Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz, LED Display: Easy to use “set and select” menu along with scrolling charger status, Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours and a temperature Sensor: Battery temperature sensor included with 7.5 meter cable. Dimensions are 36cm by 21cm by 11cm and it weighs 4kgs
You might also like
Airmar Lowrance In Hull P79 600W 50/200kHz Transducer
$279
$180
Hydrive Commander 551BH Cylinder - 2 Only
$799
$250
This is the standard 511BH cylinder that is used on the Hydrive Commander COMKIT1 series hydraulic outboard steering kit. It comes with the bent linking arm however if yours is dead flat you can just re-use your existing arm.
Ultraflex UC95-OBF1 Hydraulic Cylinder Front Mount - 3 Only
$988
$260
The UC95-OBF1 front mount cylinder is recommended for use with outboard engines up to 175hp total and where the boat speed does not exceed 80 kph. It will fit most engines including Yamaha, Evinrude, Honda, Johnson, Mercury, Mariner, Suzuki and Tohatsu. You will need to do your own homework however. This is the standard OBF1 cylinder that is used on the very common Ultraflex HyTech 175hp Hydraulic Steering Kit. This one comes with the common flat linking arm however if yours is slightly bent or offset you can just re-use it.
