If you have broken your jockey wheel handle off and it looks like this you may be in luck. This is the most common handle and really the only one you can get. To replace it you punch the roll pin out and the old one should just lift straight off the threaded rod. Dimensions are in the following photos. Note: Its important you look at where the pin goes through the handle in the 2nd picture and compare it to yours. It DOES NOT go through the flat section. If yours goes through the flat section it is most probably the Meyer/Quintrex one below.
You might also like
X
Trailer Coupling Lock with Padlock
$39.95
This is a simple trailer lock that can be used to secure the trailer to the car when parked at the boatramp or to secure the trailer when it is parked up for storage. All you do is move the cross bar from one slot to the other. It is supplied with the padlock which is shrouded when fitted to make it almost impossible to cut.
Brand:
Hunts Marine
SKU: W2901
X
Lockable Tow Hitch Pin
$59.95
Once you have a coupling lock you need to make sure that you cant just simple remove the tow hitch pin or bolt from your car. We have them on all of our company tow vehicles. Rated to 3500kgs, it's a 16mm solid stainless pin that has a lockable shrouded end. Comes with 3 keys and also a dust cover to protect where the key is inserted.
Brand:
Hunts Marine
SKU: 215199
X
Purpleline Torpedo Hitch Pin Lock
$49.95
Designed and developed in Australia the Torpedo hitch pin lock suits all standard tow hitches and articulated poly black trailer couplings. Rated to 3500kgs and with a chrome plated finish, it comes with 2 keys and will stop anyone just removing the trailer hitch from your tow vehicle.
Brand:
Hunts Marine
SKU: THP100
