Online Accessories Store

The Pro Series 1500 represents the most powerful anchor winch in the Viper range. A powerful 1500 watt high torque 12 volt electric motor allows this winch to handle tough commercial applications and larger vessel installations to a maximum of 12 metres.

The substantial drum and mounting cradle are constructed from 8mm plate stainless steel for extreme durability and long service life. The heavy duty 1500 watt motor can power out the anchor rode at a quick 60 metres per minute and retrieve at an equally impressive 55 metres per minute. The high capacity drum is supplied with 100 metres of 8mm three strand nylon rope and 10 metres of 8mm short link chain. To help avoid chain damage to vessels the special pack includes the Viper Pro Series 10 metre chain sock to suit 8mm chain. The Viper Pro Series 1500 weighs just 25.5kgs bare yet provides a high at anchor holding capacity of 3800kg's and a maximum load of 360kgs. For complete piece of mind the entire Viper Pro Series is covered by a category leading 5 year warranty.

Supplied complete with the following items:

100 metres of 8mm three strand nylon rope
10 metres of 8mm short link chain
135Amp circuit breaker
Reversing solenoid
Large Deluxe anchor roller in stainless steel mount bracket
Large stainless steel anchor swivel
Up/Down switch with face panel
5mm stainless steel sandwich mount plate
Complete mounting hardware kit

This SEAFLO Narrow, Low profile bilge pump fits deep down in small/awkward bilge spaces where other pumps won't fit. Compact, Horizontal or vertical mounting, with 360 Degree Discharge for easy remove and replace and leaves the bilge almost dry. Comes with 3 output sizes of 3/4" (19mm) and 1" (25mm) straight Hose barbs and a 1 1/8" (29mm) 90 degree elbow. It automatically turns on and off when the water rises up and down. Output capacity is 1100 GPH or 4164 LPH. Height of pump is 85mm.

This heavy duty cast 316 grade stainless steel split bollard with spring loaded pin allows securing and fastening of the anchor chain. The split can accept 8mm to 13mm chain depending on the size. The smaller unit has a 60mm by 60mm base and is 84mm high and can take chain size up to 10mm. The larger unit has a 85mm by 85mm base and is 115mm high and can take chain up to 13mm. Both sizes take 6mm fastening screws or bolts.

This light suits both 12v and 24v applications and is a twin row fluro style LED cabin light with inbuilt high/low switch so you can have either one or both rows of the LED's on. It also has a 50,000 hour life and has a diffused lens to spread the light. Dimensions are 400mm Long by 78mm wide by 30mm high.

These sleek low profile hatches are designed for use on all boats from powerboats, sailboats and large yachts. With a 25mm profile above the deck and as low as 19mm if counter sunk in teak decks, the sleek minimalist lines add style to any vessel. With smoked acrylic glass and an anodised aluminium frame they utilise a unique heavy-duty anodised aluminium frame. The larger escape hatches are designed with two struts and two twist locks and the smaller ventilation hatches use one strut and one locking lever. Each strut comes standard with a twist lock brace to hold the lid in any position up to 95 degrees. A quick release pin enables the struts to be detached from the frame, allowing the hatch to open to a full 180 degrees.

These high quality, solid bronze ships bells come complete with bronze wall bracket, striker and rope lanyard. They are a solid construction with elegant styling and good solid sound. Available in the 2 sizes of 100mm Base (4") and 150mm Base (6").

This small waterproof LED light is designed to fit inside your live well through a 5/8" diameter hole and you will be amazed at how much light it throws out. Can also be used in cupboards and storage lockers.

The BEP Splashproof Switch Panels are a stylish and quality contoured, moulded plastic panel with a removable cover plate over the switches to conceal the screws. Each switch has a backlit LED Red or Green light so you can see at a glance if they are on or off. They are available with and without fuses (blade type) and both come standard with a 29 piece label set. Suitable for 12volt only. Height = 158mm, Width = 110mm with a 75mm intrusion.

This BEP switch panel suits both 12volt and 24volt applications and has a built in USB dual charging socket. All BEP Splashproof Switch Fuse Panels are supplied complete with a 28 piece label set. They are high quality and not a cheap copy. They are all pre-wired and have spade fuses already wired into the back of the units for easy installation. Overall Size: 107mm x 95mm Cut Out Size: 87mm x 75mm Intrusion: 55mm. Labels Supplied: Anchor Light, Accessories, Aerator, Autopilot, Bait Tank Pump, Bilge Pumps, Blower, Cabin Lights, Cockpit Lights, DC Outlets, Deck Wash, Depth Sounder, Fridge, Freshwater Pump, GPS, Horn, Instruments, Inst. Lights, Navigation Lamps, Radar, Spare, Spot Light, Stereo, Stern Light, Trim Tabs, VHF, Winch & Wiper.

We use this one all the time in our Cruisecraft and Yellowfin boats. The Battery Management System makes twin battery charging easy! Pre-assembled module with solid links and application labels combining three 701 Mini Battery Master Switches with a 100 amp Voltage Sensitive Relay. It's easily connected to the existing wires, providing a fully automatic battery management system and provides for isolation of start and house batteries independently with the ability to emergency parallel supply from both. The VSR  (Voltage Sensitive Relay) automatically prioritises charging of the start battery. When the engine is first started the relay is open and remains open until the start battery has reached a preset 13.7 volt. At the rated Voltage, the relay closes providing charge to both batteries (start and house). When the Voltage drops below 12.8 volt (when the engine is stopped), the VSR disengages, separating the batteries. It eliminates possibility of draining the start battery and protects electronics powered by the house battery from harmful engine starting spikes. Dimensions are 140mm X 140mm wide X 75mm.

Lemen have released a range of padlocks that are 99% Stainless Steel. These long shank ones are available in small 30mm, medium 40mm and large 50mm which represents the width of the solid body. The length of the shank is 50mm for the small, 70mm for the medium and 80mm for the large. Each one is supplied with 3 keys.

A cracking good product and fits to all sized canopy frames and rocket launchers. Measuring 104mm X 35mm X 25mm, this is a great 80 Lumen LED white light with its own inbuilt switch. The flexible rear rubber mounting block suits tubing from 19mm to 60mm and there is a small little push button switch in the middle of the light. Supplied with stainless cover, 2 stainless mounting screws and a 30cm wire lead.

The RAM-109VU single swing arm mount consists of a 6" long swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate with universal holes already predrilled. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360 degree rotation.

The RAM-111U consists of a 63mm diameter round base that contains the universal hole pattern, STANDARD LENGTH double socket arm and 158mm x 52mm rectangle base. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, VHF Radios, Fishfinders, Gimbal Brackets and more. Overall length 186mm and will hold up to 1.8kgs.

Starbrite Ultimate Stain remover is very similar to the Ronstan Gelcoat restorer below except it is a gel formula and you don't dilute it. You should use gloves when you use this one as it contains olaxic acid. As always, test on an inconspicuous area to test colour fastness, but it's great for removing stubborn stains from your fibreglass hull incluing that brown water stain. As it comes in a gel formula it will stick to vertical surfaces so can be sprayed on the underside of your hull whilst it's still on the trailer.

Attractive, strong and corrosion resistant, these solid bar cleats are made from polished 316 stainless and will last a lifetime.

With a 10mm shaft diameter they fit any size of rowlock holder and are a great addition to any tinnie. The tube is 150mm long. They are made from 304 stainless and have plastic end caps so your rods and reels wont get harmed.

If you've got a big job to do then go for the 120g tube. Tef-Gel is teflon based and white and is a fantastic product. It is one of the only things that will pretty well eliminate any corrosion between dissimilar metals and when used on bolts it will prevent them from ever seizing. It is white in colour and has 0% solvents or silicons so will never dry out and has an indefinite shelf life. It can be used on electrical contacts and any grade of stainless or aluminium,

This Marlin Board Mount Burley Bucket is fully height adjustable! The collar which surrounds the burley bucket (not the flange that bolts on to your marlin board) has no pre-drilled holes, so all you do is use it as a template for your cut out, then place your bucket through the cut out and make sure your burley bucket reaches your water level. Once you are happy just drill 3 fixing holes and bolt it up with the supplied stainless bolts. Dimensions are 40cm high and 15cm diameter. The flange diameter is 22cm.

The Aquaviro 1Ltr bottle comes with a spray nozzle so its easy to use. Simple spray on any PVC, plastic, rubber, neoprene or hypalon surface, leave for a short time to do its work, then wipe or rinse off. It's ideal for cleaning boat fenders and inflatable boats of all make and model.

A 5 step rope ladder that folds up flat after use for easy storage. It has red polypropylene steps with a dimpled finish for extra grip. There's plastic reinforcing tube between steps for added boarding stability. Total length is 1.5Mtr.

Johnson pumps are a well known brand. This one can be mounted either on a horizontal or vertical surface. Output suits a 19mm or 3/4 hose. Output capacity is 450 GPH. Height of pump is 100mm.

This self priming pump will deliver approximately 35 litres of water per minute. It has a fixed handle with rubber hand grip. Inlet/outlet ports suit 25mm (1") hose.

This Rule float switch suits both 12V and 24V pumps up to 14 Amps (2000 GPH). It turns on when the water level reaches 2" and turns off when it reaches 3/4".