X
Stainless Removable Transom Mount Burley Bucket
$199
$199
With the same dimensions of 40cm height and 15cm diameter as the other buckets, the deluxe removable stainless steel burley bucket comes with a stainless steel transom mounting bracket plus berley bucket mounting bracket incorporating a locking pin to enable easy removal for cleaning or storage. The bucket hardware allows for the perfect mount height to be achieved as after fitting half the bracket to the boat you then choose what height you want the bucket at and mount the other half to the bucket. The removable pin then allows the halves to be separated for easy cleaning.
Brand:
Hunts Marine
SKU:
X
Side Mount Bracket to suit Gen2 pumps above
$29.95
$29.95
If you cannot screw down the removable blue plastic strainer base then you can buy this bracket so you can side mount the new Rule-Mate Gen 2 pumps. One bracket suits all three sizes.
Brand:
Hunts Marine
SKU:
X
Outlets to suit Gen2 pumps above
$19.95
$19.95
The Rule-Mate Gen2 pump above above is supplied with a 20mm (3/4") hose fitting however you can also purchase a 25mm (1") fitting, a 20mm elbow and a 25mm elbow.
Brand:
Hunts Marine
SKU:
X
Relaxn Centre Console Seat - Reversible backrest
$1,849
$1,849
The Relaxn Flip back leaning seat is the same as the fixed version above however it has a reversible backrest which make sit ideal for when you need forward or rear facing seating positions. Perfect for driving or facing astern for fishing. It's only available in the silver anodised aluminium finish with the two upholstery choices of white and grey or black and grey. Overall dimensions are 1035mm wide, 1190mm high and 596mm deep.
Brand:
Hunts Marine
SKU:
X
Relaxn Centre Console Seat - Fixed backrest
$1,449
$1,449
The Relaxn Centre Console leaning seats with fixed backrest are available in either black or silver finish frame and have a choice of two upholstery colour combos being the Grey and Black as per the picture or white (where the black is) with a dark grey insert in the middle panel. The frames are 2" aerospace 6061 aluminium and the are designed with ample space under the seat to fit a full sized esky or cooler. The backrest mounting bar allows you to mount rod racks or any accessory that can mount on to 2" tube. Overall dimensions are 1030mm wide, 1130mm high and 517mm deep.
Brand:
Hunts Marine
SKU:
X
Suspension Base Adjustable Height
$1,690
$1,690
This precision engineered adjustable height suspension base is also made from 5052 marine grade anodised aluminium for strength and high corrosion resistance. The pre loaded nitrogen gas strut produces optimal shock mitigation through rough seas. Dimensions are 415mm X 240mm X 380mm and the shock travel is 80mm. The height is adjustable from 330mm to 380mm.
Brand:
Hunts Marine
SKU:
X
Whale In-Line 12V Sink And Shower Pumps - 2 Sizes
$59.95
$59.95
This is the inline galley pump used in almost all of the Whittley boats. It is available in the 2 sizes of 12LPM and 16LPM and is a perfect little pump for sinks and low volume fresh water transom showers. It is not a self priming pump so needs to be mounted at tank level so there is always water in the line. Both models are supplied with outlet adaptors so they will suit either 10mm ID or 13mm ID hose.
Brand:
Hunts Marine
SKU:
X
Rule 12V Automatic 900GPH Low Profile Bilge Pump
$185
$185
This is the Automatic version of the pump above. This is also a new low profile version that sits only 60mm high and the outlet can be angled either up or to the side. It comes with the 4 output nozzles of 19mm straight and elbow, 25mm straight and 28mm straight. Output capacity is 900 GPH or 3407 LPH.
Brand:
Hunts Marine
SKU: RWB5159
X
Rule Replacement Round Base Strainer
$19.95
$19.95
Rule replacement round base strainer to suit 360 and 500 GPH pumps.
Brand:
Hunts Marine
SKU:
X
Rule 12V 1500GPH Bilge Pump
$245
$245
Rule is one of the most popular brands of bilge pumps on the market. All pumps are fully submersible and ignition protected with low amp draw. Output suits a 28mm or 1-1/8" hose. Output capacity is 1500 GPH or 5678 LPH. Height of pump is 150mm.
Brand:
Hunts Marine
SKU: RWB16
X
Rule 12V 1100GPH Bilge Pump
$95
$95
Rule is one of the most popular brands of bilge pumps on the market. All pumps are fully submersible and ignition protected with low amp draw. Two output nozzle are supplied. One to suit 25mm hose and the other to suit 29mm. Output capacity is 1100 GPH or 4164 LPH. Height of pump is 112mm.
Brand:
Hunts Marine
SKU: RWB805
X
Rule 12V 1000GPH Bilge Pump - Square Base
$128
$128
Rule is one of the most popular brands of bilge pumps on the market. All pumps are fully submersible and ignition protected with low amp draw. Output suits a 28mm or 1-1/8" hose. Output capacity is 1000 GPH or 3790 LPH. Height of pump is 102mm.
Brand:
Hunts Marine
SKU: RWB17
X
Rectangular LED Courtesy Light
$14.95
$14.95
Great LED courtesy light for stair ways and cabin entrances. It only needs approx 20mm depth for flush mounting and the outside dimensions are 80mm X 30mm.
Brand:
Hunts Marine
SKU:
X
6 Inch LED Swivel Reading Light With Switch - Silver
$34.95
$34.95
These are a great stylish light for use in cabins. The lens is 6 inches long and the overall length is 9 1/2 inches. They surface mount and then the centre light bar swivels up and down. Perfect for night time reading.
Brand:
Hunts Marine
SKU:
X
4 Inch LED Swivel Reading Light With Switch - White
$24.95
$24.95
These are a great stylish light for use in cabins. The lens is 4 inches long and the overall length is 7 inches. They surface mount and then the centre light bar swivels up and down. Perfect for night time reading.
Brand:
Hunts Marine
SKU:
X
LED Surface Mounted Down Light With Switch
$24.95
$24.95
This surface mounted light sits 25mm high and has an inbuilt switch. Outside diameter is 90mm.
Brand:
Hunts Marine
SKU:
X
LED Recessed Down Light - White Bezel
$19.95
$19.95
This white recessed down light is also a popular seller and is used in a lot of larger cruisers. It requires approx 15mm depth to be recessed. Outside diameter is 75mm. Light needs to be wired to a separate switch.
Brand:
Hunts Marine
SKU:
X
LED Bow Mount Combination Navigation Light - Stainless Steel
$58
$58
This is an LED combination bow mount navigation light and is designed to be mounted on a horizontal surface. They are 12volt and this set comes with a stainless steel surround. Dimensions are approx 90mm by 75mm by 40mm high.
Brand:
Hunts Marine
SKU:
X
5 inch Inspection Ports - Black, White or Clear
$18.95
$18.95
New Zealand made quality 5" Nairn inspection port with flush lid with 2 finger grips. available in all white, all black, clear lid with white surround or clear lid with black surround.
Brand:
Hunts Marine
SKU:
X
Large Recessed Drink Holder with LED - Stainless Steel
$22.95
$22.95
This stainless steel drink holder with 3 blue LED lights inside has 2 internal sizes to suit either a wine bottle or can snugly. Cutout size is approx 90mm and then there is an 8mm lip. Depth is 90mm. They have a small 1/4 inch drain fitting on the base so they can be plumbed out the sides or internally if required.
Brand:
Hunts Marine
SKU: RWB471
X
Manta 350mm Steering Wheel
$179
$179
Manta three spoke aluminium steering wheel made in Italy. It's 350mm diameter and the offset is 70mm to the back of the grip from the dash and 101mm to the front of the grip. It has a black leather look polyurethane grip with brushed black anodised aluminium spokes and a cast alloy hub to suit any 3/4 inch tapered shaft.
Brand:
Hunts Marine
SKU:
X
Base Mounted Steering Pulley
$34.95
$34.95
This base mounted steering pulley has a stainless steel bracket with a polyethylene wheel and can handle up to 5mm diameter wire. Note to be used for high performance or racing applications.
Brand:
Hunts Marine
SKU: RF2420
X
Baystar Side Mount Steering Kit up to 150hp Part # 291570
$1,300
$1,300
The Baystar Side Mount steering kit is one of the simplest kits on the market and suits almost any outboard that has a threaded tilt tube. You just need to make sure that you have the side clearance of approx 500mm for the Ram to fit without fouling on the outboard motor well or transom. It is rated up to 150hp single engine only and has an anodised alloy cylinder for reduced friction and longer seal life, chromed stainless steel push rod and patented non feedback steering lock valves. It is 5.9 turns lock to lock. Not suitable for racing or high performance engines.
Kits Include:
• BayStar helm pump standard 291490
• BayStar side mount cylinder 291072
• 15m 292997 semi rigid nylon hose kit (You trim it to correct length)
• 4 x 293610 nut and olive kit
• 1 x 291898 filler kit
• 2 x 291902 1 litre SeaStar Solutions® oil
Kits Include:
• BayStar helm pump standard 291490
• BayStar side mount cylinder 291072
• 15m 292997 semi rigid nylon hose kit (You trim it to correct length)
• 4 x 293610 nut and olive kit
• 1 x 291898 filler kit
• 2 x 291902 1 litre SeaStar Solutions® oil
Brand:
Hunts Marine
SKU:
X
Horseshoe Life Bouy Holder
$29.95
$29.95
This stainless steel horseshoe life bouy holder comes complete with a bracket for a life bouy light and rail mount bracket suitable for both 22mm and 25mm rails.
Brand:
Hunts Marine
SKU:
