Online Accessories Store

- Anchoring/Mooring/Ropes
- Boat Maintenance
- Canopies and Covers
- Electrical
- Engine Accessories
- Evinrude Johnson Service
- Fishing Accessories
- Galley
- Gift Card
- Hardware
- Lighting
- Mercury Mercruiser Service
- Minn Kota
- Miscellaneous
- Pumps and Plumbing
- Quintrex Genuine Parts
- Safety Gear
- Seating
- Steering
- Suzuki Service
- Trailer Service Items
- water sports
- Yamaha Service
X
Quintrex Silver Transom Decal - Each
$19.95
Genuine Quintrex Silver Transom decal. Dimensions are approx 25cm by 7cm (At the widest point). Note: In the picture you can see where the sticker peels off from the main square background. It roughly follows the outlines of the flags and then is thinner for the words section. Price is for one only.
Brand:
Quintrex
SKU: 268019
X
Quintrex Folding Seat Leg Kit
$55.00
This is the folding leg that is used on most of the Quintrex and Stacer rear lounges. It's 320mm long overall and has 25mm aluminium tubing which can be cut down if needed. Diameter of the 4 screw hole mounting base is 80mm. It's supplied assembled with the plastic bracket, pole and end cap.
Brand:
Quintrex
SKU: QFL
X
Quintrex Current Model Slim Line Trailer Light - Port Side
$45.00
This are the rear trailer lights that are used on the current range of Quintrex and Stacer Trailers but can be retro fitted to anything. They are LED and waterproof and can just be hard wired in too the existing trailer wiring or use the quick connect plug (comes with 1mtr lead) if you have that system. (If hard wiring just cut the plug off and make sure you seal the connection well with a bit of heat shrink). They are supplied as 1 only so if you need to do both sides make sure you purchase the Starboard one below as well. Black plastic base dimensions are 150mm long by 80mm wide and the screw holes are 100mm apart.
Brand:
Quintrex
SKU: N93730
X
Sand Anchor Kits - 3 Sizes
$65.00
This is what we use for the safety gear packs for all of our boats. Available in 3 sizes they come with 50mtrs of rope in the correct size, 2 gal shackles, stainless eye in the end of the rope and the correct amount of chain.
6lb kit - 50m by 6mm rope and 2m by 6mm chain.
8lb kit - 50m by 8mm rope and 2m by 8mm chain.
10lb kit - 50m by 10mm rope and 4m by 8mm chain.
6lb kit - 50m by 6mm rope and 2m by 6mm chain.
8lb kit - 50m by 8mm rope and 2m by 8mm chain.
10lb kit - 50m by 10mm rope and 4m by 8mm chain.
Brand:
Hunts Marine
SKU: 146016
X
Jiggler Fuel Siphon
$22.50
The jiggler fuel siphon provides a simple and easy way to siphon many types of liquids including fuel. Simply start the flow of liquid by jiggling the brass end up and down in the vertical position in the liquid. Inside diameter is 1/2 inch and the hose is 1.75m long.
Brand:
Hunts Marine
SKU: RWB5681
X
Flare Container
$29.95
Splashproof, robust and suitable for storing your flare kit and other emergency items such as a torch. Size is 305mm by 150mm by 140mm.
Brand:
Hunts Marine
SKU: 222112
X
6 Inch Black or White Registration Numbers
$1.50
6 Inch self adhesive black or white registration numbers. They are sold individually so just order the quantity you require and make a note of the registration number in the notes section when you finalise the order.
Brand:
Hunts Marine
SKU: 6BLACK
X
Stainless Steel 3 and 4 Rod storage Rack
$39.95
Used for storing rods in a horizontal position onboard or at home. Can be used on their own or teamed together. They are made of 316 Stainless steel and have rounded top and bottom edges. The external rod holder diameter is 42mm, they have a pin rod stop at the bottom and an internal polymer sleeve to protect rod handles and reels. The tube length is 210mm. The 3 rod rack is 290mm wide and the 4 rod rack is 415mm wide.
Brand:
Hunts Marine
SKU: MA101-1
X
Quintrex Rocker Switch Insert - End Piece
$6.00
This is used at either the left or right end of your switch panel.
Brand:
Quintrex
SKU: 160546
X
Clamp on Rocket Launcher
$169.00
The Clamp on Rocket Launcher has been designed to match with just about any canopy. It is made from 25mm double wall polished aluminium and has 6 high impact non corrosive polymer rod holders with a metallic finish. The maximum width is 1.9m and the framework can be trimmed to suit the width of your existing bimini.
Brand:
Hunts Marine
SKU: MA110
X
Quintrex Starboard (Green) Horizontal Mount Nav Light
$49.95
Quintrex genuine starboard side (Green) horizontal mount navigation light.
Brand:
Quintrex
SKU: 160513
X
Adjustable Aluminium Transducer Bracket - Small
$19.95
This transom mount adjustable aluminium transducer bracket is 200mm tall and the mounting panel is 50mm by 85mm.
Brand:
Hunts Marine
SKU: RWB2151
X
Live Bait Tank Kit
$195.00
Easy to install, this 30 litre live bait tank kit is 390mm Long, 260mm Wide and 290mm Deep and comes complete with heavy duty hinged lid for easy fitting to most vessels, all necessary plumbing connections, spray head plus 1.6m hose. The hatch has its own recess so all you do have a cutout big enough to suit the hatch recess and then the tank and the hatch bolt together from top and bottom and you plumb up as needed. Pump sold separately.
Brand:
Hunts Marine
SKU: SPXLBTHO-KIT
X
Quintrex Foam Rod Clip to Suit Side Panels
$10.00
This replacement Quintrex Foam Rod Clip is the one that is in all the boats that have the plastic side panels. It simply presses in so no gluing or fastening needed.
Brand:
Quintrex
SKU: 161059
X
Ute Loops - 7 sizes
$3.00
Made from 6mm bungee cord these ute loops are designed to attach to a canopy or fixed surface then fasten down over a canopy stud or ute loop hook. Available in 7 sizes, the measurement is the end of the ute loop to the fastening hole.
Brand:
Hunts Marine
SKU: BCA16
X
Titan Bench Seat Swivel Kit for Aluminium Boats
$29.99
The Titan Swivel Seat kit for aluminium boats is a great product and comes with innovative Titan Anchors which expand, locking the base to the bench seat. It also includes the special drill bit required to mount the anchors as well as the 4 stainless anchor bolts. The two piece removable boat seat easily comes apart so you can remove the seat from the boat and it swivels through a full 360° offering a truly removable seat option.
Brand:
Hunts Marine
SKU: MA765-1
X
Cast Stainless Steel Rod Holders - Straight and 30 Degree
$65.00
Available in 0 & 30 degrees these heavy duty cast 316 marine grade stainless steel game rated rod holders are fully welded, hand polished to a mirror finish and are strong enough to hold your most precious game rods. With heavy duty gimble pins and heavy wall thickness (1.5 x 48mm), the 0 degree version is ideal for your bent butt game rods. Come complete with a rubber cap to prevent unwanted water entry and a gimbal bar in the base to align the rod. They are supplied with the 4mm thick base gasket and also feature a rubber liner to protect fishing rods. Hole cutout is approx 55mm and length of tube is approx 210mm.
Brand:
Hunts Marine
SKU: BM-10008
X
Quintrex Burley Bucket Muncher
$39.95
Quintrex alloy burley bucket muncher.
Brand:
Quintrex
SKU: 161201
X
Inox Spray 300g
$12.00
Inox is excellent for spraying on the powerhead of your engine and won't dry out or wash off with water. It's what we use in all our workshops after servicing an engine. Inox contains no silicone is more of an industrial product. Leaving a clear film when it is applied, it protects, penetrates and lubricates and is designed for use where extreme climatic conditions prevail, such as the heat of an engine powerhead.
Brand:
Hunts Marine
SKU: 2497
X
Wave Rider Gas Powered Shock Absorber Pedestals - 3 Sizes
$89.00
The Waverider pedestal is the ultimate in convenience and comfort. Being gas powered, it allows easy adjustment of the seat height for each individual. It has a nylon top, anodised aluminium shaft and powder coated aluminium base. Comes in 3 sizes, 340mm to 450mm, 500mm to 630mm and 580mm to 710mm.
Brand:
Hunts Marine
SKU:
X
Clamp on Seat Swivel
$45.00
This clamp on seat swivel is adjustable to suit any tinnie bench seat. Just tighten the wing nuts till the arms clamp tight on the seat sides. Comes with a 360º PPG seat swivel with nylon slide runners for smooth operation.
Brand:
Hunts Marine
SKU: W3790
X
Quintrex Burley Bucket Kit - Small
$145.00
This Quintrex small burley bucket kit suits the standard maxi bracket and is supplied with the aluminium muncher. See diagram for dimension. Measurement in picture is 245mm.
Brand:
Quintrex
SKU: A_BURB001
X
Vuplex Canopy Clear Cleaner and Polish 445ml
$29.95
Vuplex is another fantastic product and one that we use when detailing all our new and 2nd hand boats. It is a spray on polish and is perfect for cleaning and rejuvenating your canopy clears as well as the perspex and glass windscreens on your boat. It leaves a micro layer of protection and can also be used on any plastic product around the home. It comes in a 445ml spray can.
Brand:
Hunts Marine
SKU: VU375
X
Quintrex/Stacer Trailer 100mm Bow Roller Assembly
$29.95
Bow Roller assembly to suit Quintrex and Stacer Trailers with 100mm gap. Supplied with bolt, washers and nut as well.
Brand:
Quintrex
SKU: A_BRA100
Accessories
- Latest Catalogue
- Electric Engines
- Service Items, Kits & Oils
- Anchoring/ Mooring/Ropes
- Boat Maintenance
- Cabin, Galley & Hull
- Canopies and Covers
- Electrical
- Electronics
- Engine Accessories
- Engine Spare Parts
- Fishing Accessories
- Gift Cards
- Hardware
- Lighting
- Miscellaneous & Gifts
- Pumps & Plumbing
- Quintrex Genuine Parts
- Safety gear
- Sailing
- Seating
- Steering
- Trailer Items
- Water Sports