X

Anchor Chain - 3 Sizes

$11

Hot dip galvanised anchor chain comes in 3 main sizes and is sold by the meter. It is "regular" link and is not suitable for electric anchor winches. When being used for anchoring the rule of thumb is you have a length of chain similar to the length of your boat. Sizes available are 6mm, 8mm and 10mm.
Brand: Hunts Marine
SKU: 120306
X

SeaFlo 12V 19LPM Deck Wash Pump Kit

$239

This is a great value yet good quality deck wash pump kit and has everything you need to complete the job. It has an output capacity of 19 LPM, is self priming with an adjustable pressure switch, has rubber mounted feet for corrosion protection and noise reduction, runs dry without damage and is ignition protected. The coiled hose extends up to 25 feet and coils up back to approx 16" so takes up very little storage space. It also comes with a strainer, hand nozzle and 2 by half inch hose connectors.
Brand: Hunts Marine
SKU: WP1-050-070-51
X

Hydraulic Steering Oil 946ml

$41

This hydraulic steering fluid is made by Baystar/Seastar but can be used in any sort of outboard hydraulic steering system. Buy a bottle today and keep as a spare on the boat or back in the garage.
Brand: Hunts Marine
SKU: 291902
X

Port and Starboard LED Navigation Lights - White

$59.95

These are a great quality port and starboard cabin mounted navigation light and are used on a lot of our boats. They are 12volt and this set comes with white plastic surrounds. Dimensions are approx 90mm by 55mm by 40mm high.
Brand: Hunts Marine
SKU: RWB1081
X

Small Bait Board - Rod Holder or Rail Mount

$39.95

These white polypropylene boat boards are reinforced with a unique rib core to provide a rigid and stable surface. The size of the board is 460mm by 375mm and they can be purchased in either a rod holder or 25mm rail mount setup. Both mounting setups feature an adjustable thumbscrew ratchet which allows the table to be fixed at the desired angle.
Brand: Hunts Marine
SKU: MA104-1
X

Oval Stainless Steel Angled Rod Holder

$32

This is a very common pressed 304 grade stainless steel oval flush mounted 30 degree rod holder. Comes with cap and mounting gasket. Tube length approx 240mm.
Brand: Hunts Marine
SKU: RWB511
X

PVC Straight Rectangular Rod Holder

$4.50

Available in Black or White, PVC straight deck mount rod holder with rectangular flange. Flange size is approx 85mm by 55mm. The tube is 250mm long and has an inside diameter of 40mm.
Brand: Hunts Marine
SKU: 21171
X

Mako Oil Multipurpose Spray 400g

$14.95

Mako Oil Multipurpose Spray is another great product for home, car and marine use. It is for more lighter duty use than Inox and nourishes and protects almost any surface including rubber, plastic, vinyl, leather, stainless and aluminium. Mako oil dries clear and help disperse water and inhibit corrosion and rust.
Brand: Hunts Marine
SKU: 322002
X

Stainless Steel Plough Anchor - 7 Sizes

$299

Stand out form the rest and accentuate the bow of your boat with a polished cast 316 grade stainless steel plough anchor. It is also fitted with a retrieval eye for ease of removal if snagged. The anchor size refers to the approximate weight in pounds (lb). Make sure you choose the right size for your boat. CLICK ON THE NEXT PICTURE TO SEE ANCHOR DIMENSIONS. (Note: Sizes 48 and 60 are POA as not always available)
10lb - Boats up to 5 mtrs
15lb - Boats up to 7 mtrs
20lb - Boats up to 8 mtrs
27lb - Boats up to 9 mtrs
33lb - Boats up to 11 mtrs
48lb - Boats up to 13 mtrs
60lb - Boats up to 15 mtrs
Brand: Hunts Marine
SKU: 146182
X

Quintrex Folding Seat Leg Bracket

$24.95

This is the plastic seat leg bracket on its own as a replacement.
Brand: Quintrex
SKU: 161295
X

T-Top Extension Kit - 2 sizes in 3 colours

$189

Again not a bad idea. This T-Top Extension Kit is an easy install to extend the shaded area up to 1.52m. With Dope Dyed Polyester Canvas 200g/m² which is breathable and UV-resistant, it's supplied with stainless steel Telescopic poles and fabric & polyester webbing straps which secure to your existing T-top frame. Its available in two sizes and the 3 colours of Grey, White and Black in each size. See additional pictures for full dimensions.
Brand: Hunts Marine
SKU: MA049-1BK
X

Cable Cover Kits - Black or White

$5

Available in Black or White, this Cable Cover Kit is ideal for covering cable entries on transoms, instrument panels and aluminium or fibreglass dashes. It can cover holes up to 28mm diameter and the snap in plastic bush stops cables wearing on any sharp edges as they vibrate or move around. Mounts simply with 2 by 6 gauge screws. (not supplied)
Brand: Hunts Marine
SKU: W1575
X

Whitewater Bimini - 5 sizes in 5 colours

$265

The Whitewater Bimini is a heavy duty bimini with 2mm thick 25mm bright dipped aluminium tube and is designed for higher speeds both on the water and the road. They have an adjustable fixed arm at the rear. It's only 1.3m long so is great where you just need a bit of sun protection and then maximum fishing and casting room. The height of all 5 bimini's is 1.2m It suits all the boat types of open, runabout, half cabin, bowrider and ski. All Bimini's come with an integrated sock/boot system so you can fold it away for more room and high speed road trailering. Colour choices are Blue, Black, Grey, Sand and Maroon. Please make a note which colour you would prefer when placing order. Click on Product Name above to see full details of fitting and sizing to suit your boat.
Brand: Hunts Marine
SKU: MA090-0
X

Outboard Backing Plate or Transom Board

$29.95

This outboard backing plate, or transom board, is what we use in the workshop for all our installations. It's made from solid 8mm thick UV polypropylene and has smooth rounded outer edges for a professional finish. The top is 390mm wide, the bottom is 350mm and the height is 330mm.
Brand: Hunts Marine
SKU: L100134
X

Canopy Rope/Ute Loop Hooks - White or Black

$1.50

Canopy rope or ute loop hooks in nylon. The screw holes are already countersunk.
Brand: Hunts Marine
SKU: OP47
X

Outboard Motor Trolley

$110

Rated to 50kg this is the main trolley that we sell pallet loads of in our accessories department and the one we use in our service department. It will suit a 2 stroke up to about 20hp and a 4 stroke up to about 15hp. It has a plated steel frame with plastic end caps on all tube ends and soft rubber hand grips. It has 150mm diameter plastic wheels. Supplied in kit form which is quick and simple to assemble.
Brand: Hunts Marine
SKU: RWB3875
X

Plug In Telescopic LED All Round Light

$99.95

Plug in telescopic LED all round white navigation light. The pole is 1.5mtr tall when extended and when removed from the base there is a rubber cap to prevent water entry.
Brand: Hunts Marine
SKU: RWB3897
X

Small Recessed Drink Holder - Black or White

$9

Available in Black or White these drink holders suit cans and smaller bottles. Cutout size is approx 70mm and then there is an 8mm lip. Depth is 75mm.
Brand: Hunts Marine
SKU: W466
X

Rectangular Outboard Flusher

$10

This is a common flusher that will suit mainly larger engines. It has rectangular black PVC ear muffs mounted on a painted steel frame.
Brand: Hunts Marine
SKU: RWB3872
X

50mm Budget Bracket Mount Compass with Light

$19.99

This 50mm bracket mounted compass with light is a great option for smaller trailerboats. It is easy to read and is corrosion resistant.
Brand: Hunts Marine
SKU: SC040
X

Oceansouth Side Console Cover

$170

All Oceansouth Covers are light grey in colour and are made from a 600 denier premium woven dope dyed polyester fabric which is breathable and water repellent. They are designed to be semi custom fit covers and are a perfect choice when you need something to store your boat from the sun, rain, leaves, dust and birds. They are not really designed for trailing at high speeds however can be towed provided they are fitted tightly and correctly as per instructions. Click on Product Name above to see full details of fitting and sizing to suit your boat.
Brand: Hunts Marine
SKU: MA205-6
X

Salt Engine Flush - 1Ltr concentrate

$39.95

For use in all salt water cooled engines, inboards, outboards and jet skis. It removes salt deposits and protects your engine from corrosion. Simply add 50mls of Salt Engine Flush concentrate to the engine flush adaptor below, place adaptor in-line between the garden hose and the engine water inlet and turn on the tap. The flow of engine flush concentrate can be adjusted up or down to determine the length of the flush time but a few minutes is heaps. Continue to flush the engine for a further 2 minutes with just fresh water to remove the last of the concentrate. NOTE: The engine does not have to be running for this product to work. You can use the static flush port found on most late model engines or you can use earmuffs for older engines.
Brand: Hunts Marine
SKU: HMEF1
X

Adaptor for Salt Engine Flush

$29.95

This adaptor for the Salt Engine Flush above comes with a 100ml capacity canister as well as the inlet and outlet hose fittings. Just add 50ml to 100ml of the Salt Flush, connect the hose and start flushing your engine. The dial on top lets you turn the ratio up and down depending on how long you want to flush your engine for.
Brand: Hunts Marine
SKU: HMEF
X

Outboard Motor support Bracket

$69.99

The "MOTO FLEX" deluxe support bracket for outboards suits motors up to 150HP and supports the motor leg while towing to take the weight of the hydraulics. It's adjustable from 510mm to 770mm and made from heavy gauge plated steel tubing with a shock absorbing spring steel coil. The "U" end hooks over the trailer chassis or real roller and the padded "V" end supports the motor leg. Supplied complete with rubber securing strap with end hooks.
Brand: Hunts Marine
SKU: RWB616