Online Accessories Store

12volt plastic flush mounted socket with splashproof rubber lid. Requires a 27mm hole for mounting and suits all standard 20mm accessory plugs. Perfect for charging phones, spotlights and 12v air pumps for blowing up tubes and biscuits.

The Oceansouth Heavy Duty T Top has been redesigned to further improve performance and reliability. This is a heavy duty unit designed for larger console boats or people wanting something that will really handle the elements. It's 2.1m high and can be shortened to your required height if needed. The bimini canopy is made from a 600 denier polyester fabric and the tube size is 44mm polished aluminium and includes all the fittings you will need for complete easy installation. Fabric colour choices are Navy and Black. The dimensions of the T-Top fabric section is 2.00m long and 1.40m wide. The maximum width your console can be is 1.00m. See additional pictures for full dimensions.

The Oceansouth Classic T-Top is a long time favourite and adjusts to fit a range of centre console widths. Both sizes are 2.05m high and can be shortened to your required height if needed. There is a join at 1.45m high so the top can be easily removed for garage storage if needed. The bimini canopy is made from a 600 denier polyester fabric and is available in navy Blue or Black and the tube size is 32mm polished aluminium and includes all the fittings you will need for complete easy installation. The MA080-1 has a T-Top width of 1.2m and length of 1.7m and suits consoles up to a maximum width of 0.85m. The MA080-2 larger version has a T-Top width of 1.4m and length of 1.7m and suits consoles up to a maximum width of 1.05m. See additional pictures for full dimensions.

Boatsmart Extracut polish has all the same properties as the superfine above however it has courser abrasive and really cuts out heavy oxidisation and scratches. For best results wet sand out any deep scratches and then use Extracut with a buffer. You will need to go over with Superfine to remove any swirl marks from the Extracut. Comes in a 500g tub which is easily enough to do a 20ft trailerboat one or two times.

Exactly the same principle as above except the float is an inflatable heavy duty orange PVC that can be deflated for easy storage. It inflates to approx 320mm diameter and the stainless ring splits apart so you can clip it on to your anchor rope. 

We bought these on special from a supplier who was closing up. They are fully welded under the collar and are actually really solid and very good quality. they are perfect for downriggers and bait boards. Comes with cap and mounting gasket. Tube length approx 220mm.

SOLD OUT  This is the previous Maritime seat in the Quintrex boats. The seat is pretty much identical to the new one above except it just has the previous logo on the back. It also has the flip up bolster at the front. Give your boat a face lift today. You can also fit one or both of them with the slider to suit. Note: Price is for ONE only and does NOT include the pedestal. 

This is the current telescopic anchor light that is used on all Quintrex and Stacer boats. Dimensions are in the picture. It is supplied with the pole and the base.

These are excellent and weigh only 2.3kgs. Crafted with a lightweight yet strong brushed anodised aluminium frame, the chair offers excellent durability without adding bulk. The seat and backrest are made from Oceansouth’s premium ATLAS marine-grade fabric, renowned for its toughness, UV resistance, quick drying and easy maintenance — so it performs just as well in full sun by the pool as it does out on the water. Rubber feet provide enhanced stability on various surfaces and ensure that decks and floors remain unmarked and slip-free. Dimensions are 930mm high, 585mm wide and 360mm deep when set up.

This is a great little 12V surface mounted cockpit light that gives you the choice of 4 colours without the need for a controller. Just turn the switch on and off and it will cycle between each colour. Its only 107mm long by 15mm high and is all plastic so wont rust or corrode.  Featuring 6 mesmerising RGBW LEDs, each light cycle offers a spectrum of colours including radiant White, Blue, Red, and Green. With just a press of the switch, toggle through your preferred colour or let them cycle seamlessly with a simple Off/On action. White is 43Lumen, Green is 27 and Blue and Red are 7 Lumens each.

Made in Sweden, Zipwake is the world's first Dynamic Trim Control System which incorporates a state of the art series of durable, fast acting interceptors, eliminating the well known trim problems of planing and semi planing hulls. The S Series suits boats between 17 to 50 feet. The system is fully automatic and significantly enhances performance, fuel economy, comfort and safety when accelerating and cornering. Thye have a built in GPS, 3D Gyro and 3D Accelerometer. 

A kit box includes all the parts needed to install a dynamic trim control system with one pair of fast acting interceptors. There are 4 different kit boxes, one for each length of interceptor model. The 4 different kits are the different interceptor lengths of 300mm, 450mm, 600mm and 750mm. The two most common kits by far are the 300mm and the 450mm and are the ones used on all our trailerboats including the large Yellowfin plate boats and the CruiseCrafts.

Each kit contains a pair on interceptors with 3mtrs cables on each, the control panel with a 7mtr cable and the distribution unit with a 4 mtr power cable. Dimensions of the control panel and the interceptors are in the pictures.

Completely adjustable to suit any brand of phone. Though HoldFastPro was born while creating the best cell phone holder for boats, they have found endless possibilities to secure the adjustable cell phone holder too! Order yours today and save the drink holders on your next boating trip for drinks! Made of durable, high impact plastic, 2 Velcro straps provided to secure to most T-Top Consoles and round poles – adjust the phone holder strap to a round pole 1 inch to 5 inches and keep your phone safe, secure, and at your fingertips. Sunglass hanger attached to phone holder Not just limited to use on your boat, can be used on beach umbrellas, golf buggies and more. CLICK HERE to watch a quick YouTube clip on how it works.

MIU MINI is a powerful and hardwearing underwater LED light option ideal for small leisure boats averaging 4-6 metres. Measuring only 93mm wide, 50mm high and 7mm deep, the ultra-thin and impact-proof, MIU MINI generates a 1200+ fixture lumen and will penetrate on average 5 to 6 mtrs in most water conditions. It has 1mtr of twin sheathed cable and the unit is designed to be glued, rather than screwed on. See last picture for installation instructions. There is also installation instructions in the box.

This bracket mount compass is ideal for centre consoles, runabouts, bass boats, PWC's and sport fishing boats. It also has adjustable compensators. It sits about 74mm high, 86mm wide and 63mm deep.

Effortlessly install a RAILBLAZA HEX strike-ready HEXX Rod Holder onto your rails. Solidly constructed from durable materials, the clever HEXX RailMount features an integrated grub screw for extra holding power. HEXX RailMount 25 fits perfectly on rails 1” (25mm) in diameter.

Great for large cockpits, dockside installation and even home cleaning useThe Seaflow Hosecoil is designed to facilitate easy, neat, safe storage. It consists of UV-protected 20 foot (6.5 m) Coiled 5/16 O.D Hose, soft contoured rubber grip spray nozzle with adjustable tip and all quick connect fittings.

Made from 316 Stainless Steel, this is a popular heavy duty fully adjustable rod holder extension with a 42mm Inside diameter tube to take the rods. It rotates 360 degrees as well as vertically 180 degrees. The bottom tube size is OD42mm and the bottom and top tube lengths are 323mm to pivot point so 646mm overall.

Dimensions of all 5 tanks are in the last picture. Ranging from 50ltr up to 200ltr, these Plastimo flexible water tanks are strong and reliable and a practical low cost solution to fresh water storage on board. They are flexible, lightweight and form-fitting and so can be installed in compartments where it would not be possible to fit a rigid tank. Double envelope - a water chamber inside a tough nylon outer. Consists of a welded nonporous tasteless NON-BPA PVC water chamber (inner bladder) inside a tough nylon outer. They are completely waterproof and highly resistant to tearing and  abrasion. The inner water bladder can be easily removed from the outer covering for routine cleaning and inspection and replacement inner bladders are available, if required. The tanks include tie-down loops on the corners and all tanks have a 38mm (1 1/2”) hose inlet fitting on the upper side of the tank and a 12mm (1/2”) hose outlet fitting on the underside. The exception is the triangular bow tank where both fittings are located on the upper side. When filled with water all tanks are approx 250mm depth.

Handy to have for a million applications. It's 3mm diameter 8 plait solid colour UV treated polypropylene venetian blind cord. Each roll is 100mtrs.

A very common product, its a large size woven polyester netting with elastic shock cord all round and nylon corner securing clips. This versatile elastic netting can be used for securing bedding, clothing and cabin items as well as being a great cupboard organiser. Its 2mtrs wide and 600mm high.

Significantly quieten your chain so that you don’t scare away the fish! Our Chain Guard Sock is exclusively manufactured for Savwinch. Made from a custom thick sleeving which reduces almost all of the noise from the chain going over the Bowsprit. The thick custom material stretches over both 6mm and 8mm chain which allows the chain to breathe, ensuring you don’t get any sand/mud/seaweed stuck in the sleeving. Available in 7mtr or 9mtr lengths.  

The Savwinch Wiring Loom Kit includes twin sheath cable, heatshrink and required terminals. Featuring oversized cable to ensure that you don’t experience any voltage or performance issues. What length you choose will depend on not only the size of your boat but also where you batteries are positioned. 

There is a picture attached that shows you how the clip works. Its worth looking at so just scroll through. Made in Australia from stainless steel all you do is simply shackle the correct sized clip onto the float above (300mm float works best for these) and when ready to retrieve you anchor you just clip it on to the rope anywhere and simply drive forward at about 6 knots. The float will run down the anchor line as the clip has a one way design.  It will stop when it hits the chain and the power of the float will pull the anchor free. You then simply pull all the slack rope and the rest of the anchor in. Suits all types of anchors, saves your back and no more sore hands or whinging. The clips are the same size and all that changes is the small V shaped gap at the bottom that suits the appropriate rope size. (Note: shackle not supplied but just use anything you have as its doesn't have to be big.)

All four anchor kits are 4 prong and are supplied straight and you bend them yourself with a bit or pipe or in a vice. It's not hard to do. Available in 4 sizes they all come with 50mtrs of silver rope all in 8mm thickness, 2 gal shackles, stainless eye in the end of the rope and the correct amount of chain. The 4 kits are:
8mm pronged anchor with 2mtrs chain - suits 3m - 4m boat
8mm pronged anchor with 3mtrs chain - suits 3.5m - 4.5m boat
10mm pronged anchor with 2mtrs chain - suits 4.5m - 5m boat
10mm pronged anchor with 3mtrs chain - suits 5m - 5.5m boat