X
Quintrex/Yellowfin 150mm Genuine Inspection Port
$19.95
$19.95
This is the inspection port found on the rear of all Yellowfin and larger Quintrex boats. The thread will match up so if you loose your lid just buy this and then you don't need to replace the surround. O-ring seal for maximum protection.
Brand:
Quintrex
SKU: 165927
X
Seaflo Hosecoil Washdown Hose
$49.99
$49.99
Great for large cockpits, dockside installation and even home cleaning useThe Seaflow Hosecoil is designed to facilitate easy, neat, safe storage. It consists of UV-protected 20 foot (6.5 m) Coiled 5/16 O.D Hose, soft contoured rubber grip spray nozzle with adjustable tip and all quick connect fittings.
Brand:
Hunts Marine
SKU: SFHW2-060-01
X
Stainless Steel Fully Adjustable Rod Holder Extension
$125
$125
Made from 316 Stainless Steel, this is a popular heavy duty fully adjustable rod holder extension with a 42mm Inside diameter tube to take the rods. It rotates 360 degrees as well as vertically 180 degrees. The bottom tube size is OD42mm and the bottom and top tube lengths are 323mm to pivot point so 646mm overall.
Brand:
Hunts Marine
SKU: FM99290
X
Heavy Duty Flexible Water Tanks - 5 Sizes
$159
$159
Dimensions of all 5 tanks are in the last picture. Ranging from 50ltr up to 200ltr, these Plastimo flexible water tanks are strong and reliable and a practical low cost solution to fresh water storage on board. They are flexible, lightweight and form-fitting and so can be installed in compartments where it would not be possible to fit a rigid tank. Double envelope - a water chamber inside a tough nylon outer. Consists of a welded nonporous tasteless NON-BPA PVC water chamber (inner bladder) inside a tough nylon outer. They are completely waterproof and highly resistant to tearing and abrasion. The inner water bladder can be easily removed from the outer covering for routine cleaning and inspection and replacement inner bladders are available, if required. The tanks include tie-down loops on the corners and all tanks have a 38mm (1 1/2”) hose inlet fitting on the upper side of the tank and a 12mm (1/2”) hose outlet fitting on the underside. The exception is the triangular bow tank where both fittings are located on the upper side. When filled with water all tanks are approx 250mm depth.
Brand:
Hunts Marine
SKU: RWB8200
X
Venetian Blind cord - 5 Colours
$34.95
$34.95
Handy to have for a million applications. It's 3mm diameter 8 plait solid colour UV treated polypropylene venetian blind cord. Each roll is 100mtrs.
Brand:
Hunts Marine
SKU: RWB8520
X
Elastic Bunk or Cupboard Netting
$39.95
$39.95
A very common product, its a large size woven polyester netting with elastic shock cord all round and nylon corner securing clips. This versatile elastic netting can be used for securing bedding, clothing and cabin items as well as being a great cupboard organiser. Its 2mtrs wide and 600mm high.
Brand:
Hunts Marine
SKU: RWB1093
X
Savwinch Chain Guard Sock - 2 lengths
$45
$45
Significantly quieten your chain so that you don’t scare away the fish! Our Chain Guard Sock is exclusively manufactured for Savwinch. Made from a custom thick sleeving which reduces almost all of the noise from the chain going over the Bowsprit. The thick custom material stretches over both 6mm and 8mm chain which allows the chain to breathe, ensuring you don’t get any sand/mud/seaweed stuck in the sleeving. Available in 7mtr or 9mtr lengths.
Brand:
Hunts Marine
SKU: 5041
X
Savwinch Wiring Loom Kits - 3 lengths
$185
$185
The Savwinch Wiring Loom Kit includes twin sheath cable, heatshrink and required terminals. Featuring oversized cable to ensure that you don’t experience any voltage or performance issues. What length you choose will depend on not only the size of your boat but also where you batteries are positioned.
Brand:
Hunts Marine
SKU: 5081
X
Ezy Lift Anchor Clip to suit float above - 2 Sizes
$39.95
$39.95
There is a picture attached that shows you how the clip works. Its worth looking at so just scroll through. Made in Australia from stainless steel all you do is simply shackle the correct sized clip onto the float above (300mm float works best for these) and when ready to retrieve you anchor you just clip it on to the rope anywhere and simply drive forward at about 6 knots. The float will run down the anchor line as the clip has a one way design. It will stop when it hits the chain and the power of the float will pull the anchor free. You then simply pull all the slack rope and the rest of the anchor in. Suits all types of anchors, saves your back and no more sore hands or whinging. The clips are the same size and all that changes is the small V shaped gap at the bottom that suits the appropriate rope size. (Note: shackle not supplied but just use anything you have as its doesn't have to be big.)
Brand:
Hunts Marine
SKU: RWB2890
X
Reef Anchor Kits - 4 Sizes
$65
$65
All four anchor kits are 4 prong and are supplied straight and you bend them yourself with a bit or pipe or in a vice. It's not hard to do. Available in 4 sizes they all come with 50mtrs of silver rope all in 8mm thickness, 2 gal shackles, stainless eye in the end of the rope and the correct amount of chain. The 4 kits are:
8mm pronged anchor with 2mtrs chain - suits 3m - 4m boat
8mm pronged anchor with 3mtrs chain - suits 3.5m - 4.5m boat
10mm pronged anchor with 2mtrs chain - suits 4.5m - 5m boat
10mm pronged anchor with 3mtrs chain - suits 5m - 5.5m boat
8mm pronged anchor with 2mtrs chain - suits 3m - 4m boat
8mm pronged anchor with 3mtrs chain - suits 3.5m - 4.5m boat
10mm pronged anchor with 2mtrs chain - suits 4.5m - 5m boat
10mm pronged anchor with 3mtrs chain - suits 5m - 5.5m boat
Brand:
Hunts Marine
SKU: 109205
X
Safety Grab Bag
$324
$324
Whilst at first this kit may look expensive, it's actually a very good idea and you also get the 90ltr heavy duty PVC woven bag with waterproof moulded EVA base. The bag dimensions are 750mm by 360mm by 360mm and is great for an emergency fish kill bag. The kit contains 4 jackets, waterproof torch with batteries, V sheet, 1kg fire extinguisher, signalling mirror, pealess whistle, bailer scoop and 2 telescopic paddles. It does NOT come with flares as they cannot be shipped however we sell them in store. Don't forget you will also need an anchor, rope and chain so if you look in the Anchoring/Mooring/Ropes section there is a great selection as well as a perfect portable folding anchor kit that will fit in the bag.
Brand:
Hunts Marine
SKU: RWB9927
X
Oceansouth Super Heavy Duty T Top - 3 Fabric Colours
$1,290
$1,290
Oceansouth Australia’s latest addition, the Heavy Duty T-Top, is a game-changer for marine enthusiasts seeking reliability and durability. Crafted with premium materials and innovative engineering, this T-Top boasts exceptional strength to withstand the toughest conditions on the water. Its sleek design not only enhances the aesthetics of your vessel but also ensures practicality and functionality, offering ample shade and protection while maximizing deck space. Engineered for easy installation and built to last, the Heavy Duty T-Top from Oceansouth Australia is a top-tier choice for those who demand quality and performance in their marine adventures. The bimini canopy is made from a 600 denier polyester fabric and the tube size is 44mm clear anodised aluminium and includes all the fittings you will need for complete installation. (Moderate skill required) Fabric colour choices are Navy, Black and Dark Grey. Max console width can be 900mm and to special order you can get the frame powder coated in White, Grey or Black. Note: Rod Holders are not included and can be purchased below. See additional pictures for full dimensions.
Brand:
Hunts Marine
SKU: MA182A-B Navy
X
15AMP Blue LED push button on/off switch
$24.99
$24.99
15 Amp push button switch to suit switch panels above. They don't have to be mounted in the panel and as they are IP67 waterproof they are great to just fit on their own out in the open somewhere. Note: Stickers are supplied separately below.
Brand:
Hunts Marine
SKU: BM-90200-15
X
Deluxe Kool Bag - OMNI Size
$156
$156
Kool Bags just got even better! Now with thicker 20mm insulation, they’re the perfect way to store your catch and keep it chilled and cold! They’re designed with a stable base so they don’t tip over, making them user friendly and easy to fill. Ideal for taking out on the boat! They feature a drain plug at one end for easy emptying, carry handles for easy moving and a fish ruler on the side so you can measure your catch before storing it! Dimensions are 500mm X 400mm X 400mm.
Brand:
Hunts Marine
SKU: BBB-AFNAC9072
X
Fixed Bimini Top Support Poles - 1100mm length
$35
$35
If you buy one of the 2, 3 or 4 bow bimini's above these are a great addition. These poles are fitted at the rear and hold the canopy up away from your engine and out of the way when you put it back in its inbuilt sock. They can be cut down if needed. They are made from 25mm aluminium tube and have the nylon mounting bases and tube fittings included.
Brand:
Hunts Marine
SKU: MA051-4
X
Shark Flex Ultra Plus Suspension Seat Base with Seat - Black or White
$3,250
$3,250
Again utilising the Shark Flex suspension mechanism it also comes with a polycarbonate and rubber foam seat in either black or white and is rated to 130kgs. It's easy to clean and is ideal for making your ride softer still. It has an overall width of 327mm and full dimensions can be found in the additional pictures attached.
Brand:
Hunts Marine
SKU: 293887
X
Shark Flex Plus Suspension Seat Base with Plinth
$2,450
$2,450
The Shark Flex Plus runs the same suspension system as the Shark Flex however it sits atop a Flexanite Plinth seat base with storage compartment to raise the overall height to 650mm. All other specifications are as per the standard Shark Flex. Further dimensions can be seen in the pictures attached.
Brand:
Hunts Marine
SKU: 293886
X
HD Clamp On Rod Holder to suit Fisherman, T Top and Heavy Duty Bimini - 2 Sizes
$39.95
$39.95
The heavy duty clamp on Fishing Rod Holder is manufactured with Capron HMGB Nylon for superior structural strength and has a moulded rod gimbal in the shaft base. Both models have an internal diameter of 40mm and its available to suit rails 32mm & 44mm so it can be used for Oceansouth Heavy Duty and normal T-Top's. Note: Suits all the T Tops above but NOT the Deluxe model below.
Brand:
Hunts Marine
SKU: 21153
X
USA style small bow mount Nav Lights - Stainless Steel All in one
$65
$65
These 4 (here and below) USA style Horizontal Mount LED Nav lights are a great substitute for almost all of the Nav lights fitted to imported American boats over the years. The dimensions of all 4 are the same, including the 2 piece ones, and they are L76mm by W58mm by H35mm. They are made from black UV resistant plastic and are waterproof to an IP67 rating. Both styles are available in either a stainless steel housing or a black plastic housing. This first on in the stainless 1 piece version. (The picture of the smaller pair just shows how they look from the left and the right.)
Brand:
Hunts Marine
SKU: 121062
X
Complete Viper Deck Mount Outrigger Set Includes Bases, Poles and Line Clip Kit
$1,370
$1,370
There are 2 poles and absolutely everything you need in this kit. This high quality complete outrigger kit comes with everything you need and is a great seller. The 8mm 316 grade stainless steel bases with spring loaded S/S locking pins are designed to provide 180 degree rotation bow to stern adjustment and 90 degree vertical sky to water adjustment. Each side mounted base has the ability to be rotated for perfect trawl alignment. The 3 stage 4.8m Telescopic UV Stabilised Black telescopic outrigger poles are a fibreglass composite and weight only approx 5kgs for the pair. Kit also includes sandwich plates, all fixing hardware, weather proof caps for bases when not in use, tag lines, clips, pulleys and tag returns. Five year warranty! Sold as a pair.
Brand:
Hunts Marine
SKU: BM-80002
X
Heavy Duty Dinghy Wheeler - Pair
$165
$165
These heavy duty wheels allow you to easily move your boat across sand and all firm surfaces including parking lot and boat ramps. The Heavy Duty wheels measure 105 x 135mm and can carry boats up to 200 Kg in total weight and up to four metres in length. An all non-corrosive construction with self-lubricating wheels means no maintenance is required and the wheels also easily lock up in up or down position for convenience. Suitable for all wooden, fibreglass, aluminium an inflatable boats with a solid, fixed transom.
Brand:
Hunts Marine
SKU: W2648
X
Transom Protector Pad
$9
$9
Made from heavy black plastic, the pad fastens to the dinghy transom to prevent wear from the outboard clamps. Dimensions are 270mm x 96mm and it has 5 x 4mm countersunk fastening holes. (Screws not supplied)
Brand:
Hunts Marine
SKU: RWB1754
X
Deluxe Side Mount Cockpit Table with or without Soft Top Matting.
$550
$550
The removable Side Mounting Table Pedestal kit is the perfect spacesaver solution for your boat. The Side Mounting Pedestal is made from high-quality marine grade stainless steel. A versatile heavy-duty aluminium mounting bracket can be mounted against any vertical surface making it ideal for all entertainment areas. The Side Mounting Pedestal is perfectly paired with the Premium Tabletop, which attaches to the Pedestal bracket with a pull-pin that locks the Tabletop in place. The pull-pin is easily accessible when you need to remove and store the table. This Tabletop is available in a premium artic white high-gloss surface or the eye-catching contoured Seadek finish. The table top is 740mm wide by 460mm deep and has 4 recessed cup holders.
Pedestal:
• W 365mm x H 350mm.
• Eliminates the need for mounting holes in the deck or cockpit.
• Easily removable when not in use.
• Polished stainless steel finish with anodised aluminium bracket.
• Quick release pin.
Pedestal:
• W 365mm x H 350mm.
• Eliminates the need for mounting holes in the deck or cockpit.
• Easily removable when not in use.
• Polished stainless steel finish with anodised aluminium bracket.
• Quick release pin.
Brand:
Hunts Marine
SKU: 293980
X
Johnson SPXFLOW 500GPH Cartridge Style all in one Straight and Inline Live Bait Tank Pump
$99.95
$99.95
This is the 500GPH version. Used on Quintrex and Stacer Boats, it is both straight and inline all in the one pump. All necessary bits are supplied to simply convert the one pump from straight to right angled. This is a 12V small, low profile pump that suits small confined bilge and tank areas and has an easy to change motor cartridge should it ever get blocked with debris and fail.
Brand:
Hunts Marine
SKU: 10-13642-01
