Online Accessories Store

Screw on rubber boot designed for 2 and 3 position switches above that have a threaded collar.

120amp Anderson Plug designed for super heavy duty joining applications. Price is for one half so just purchase two for the complete pair.

50amp Anderson Plug designed for heavy duty joining applications. Price is for one half so just purchase two for the complete pair.

This BEP twin battery switch is high quality and small so it perfect for trailer boats where a nice neat installation is crucial. It's rated to 200 amp continuous, 300 amps intermittent and 1000 amps cranking. It suits applications up to 48volt. Dimensions are 69mm X 69mm X 75mm.

This 10amp two position switch with rubber boot is suitable for all 12 and 24volt applications and can either be mounted on its own or as a replacement in a switch board. Hole diameter for mounting is 12mm

This ORANGE Bouy Fender has a reinforced black single eye with stainless steel insert for extra strength, is extra heavy duty and designed for commercial applications. They are available in 5 sizes: (Diameter by Length).
350mm by 480mm
450mm by 620mm
550mm by 730mm
650mm by 880mm
850mm by 1050mm

Sikaflex is the BEST marine sealant on the market and is the only brand that we use in all our workshops. We use it for sealing anything that needs to be watertight like windows, skin fitting, transducers and most importantly engine mounting bolts. It sticks to anything and can be overpainted. This is the 310ml gun refill in black. Tip: For a nice smooth finish when edging, dip you finger in dish washing liquid and you can smooth out the Sikaflex without it sticking to your finger.

This high density foam float is available in the 2 sizes of 250mm diameter and 300mm diameter. Both come with a solid 100mm diameter stainless ring on the end and they can be used for Anchor lifting Floats when you purchase the Ezy Lift Clip below or they are often used by skin divers and fisherman to hold fish bags and traps. 

This WHITE Bouy Fender has a reinforced blue single eye, is extra heavy duty and designed for commercial applications. They are available in 5 sizes: (Diameter by Length).
350mm by 480mm
450mm by 620mm
550mm by 730mm
650mm by 880mm
850mm by 1050mm

The Oceansouth Aluminium Swivel with 8-Position Lock is engineered to provide smooth, controlled rotation and secure seating on board. Designed with durability and functionality in mind, it offers full 360° seat rotation and an 8-position locking system, ensuring safe and stable seating in all conditions. Featuring an easy-to-use locking lever accessible while seated, you can quickly adjust the swivel and lock position without having to stand or reposition.

The Oceansouth aluminium Pedestal Slider with 8-Position Lock Swivel is designed to deliver superior comfort, adjustability, and durability on the water. It features smooth forward and backward seat adjustment, allowing users of different heights and body shapes to find their ideal seating position. The full 360° rotation enhances manoeuvrability, while the 8-position locking system ensures secure and stable seating in any conditions.

Equipped with easy-to-use levers that can be accessed while seated, this slider allows quick adjustment of both the sliding and swivel functions – offering convenience without needing to stand or reach awkwardly. Made from marine-grade aluminum, it’s built to resist corrosion and perform reliably in harsh marine environments. Compatible with most heavy-duty boat seat pedestals, it’s the perfect upgrade for long-lasting comfort and functionality.

Using the standard 175mm (7") configuration template its and constructed from high-quality marine-grade aluminium, this swivel is designed to withstand harsh marine environments, offering excellent corrosion resistance and long-lasting performance. It is compatible with all Oceansouth boat seats and pedestals, as well as most other popular brands, making it a versatile choice for upgrading or replacing your existing boat seat swivel.

These are the replacement clip in motors for the new style Rule pumps.

Made by Atlantic products, this is an after market spare wheel carrier that suits galvanised trailers and it bolts on to the side rail or draw bar. Its a multi fit stud pattern so suits Holden and Ford wheels as well as 13" and 14". Supplied with 4 mounting bolts, 2 wheel studs and the padlock. See second picture but the backing plate and carrier have 6 holes and the plate is 10cm wide and 15cm tall. The fully threaded bolts supplied are 11cm long so it will work with any frame size.

Available in the 2 heights of 400mm and 530mm, the Oceansouth Boat Seat Boxes deliver a smart combination of strength, practicality and style. Built from UV-treated, marine-grade ABS plastic, these seat boxes are engineered to withstand years of exposure to sun, saltwater and heavy use. Their heavy-duty construction, combined with stainless-steel hardware and a watertight seal, ensures reliable performance while protecting your gear from the elements. With their robust marine-grade construction, integrated shelved storage, and accompanying 5 fishing tackle boxes, the Oceansouth Boat Seat Boxes offer boaters the perfect combination of seating comfort and practical storage. Whether you choose the compact 415mm high version or the taller 520mm option, both are built to deliver reliability, strength, and convenience for years to come.

Each seat box includes a watertight floor (base footprint 440mm x 440mm) with 12 fastening points to mount securely to the deck of your vessel (12 × tapered stainless-steel screws included). The box also comes with a standard 7″ (177mm) black metal seat swivel (stainless-steel bolts to secure the swivel to the boat seat box included), making it compatible with all Oceansouth boat seats and most other marine seating brands.

These are the same 2 seat bases as above except instead of just the access hatch they have a tackle storage compartment. Inside, the water-proof storage box is equipped with five removable horizontally stacked tackle boxes. Each tackle box measures 235mm (L) × 185mm (W) × 50mm (H) and features a clear hinged lid for quick visibility and access. Each box contains 12 compartments with removable dividers, allowing you to customise the storage space to suit your gear – perfect for organising fishing lures, hooks, sinkers, swivels and other tackle items.

This Scanstrut ROKK charger securely holds and wirelessly charges your phone even in the toughest conditions. Now you can keep your phone in reach, fully charged and ready to go. Installation is simple on any boat, caravan, 4WD or outdoor location. Four screws secure the unit onto any flat surface with a simple installation guide and drilling template. A waterproof cable pass-through completes the IPX6 sealed installation. The Active charger is easy to clean and can be washed down with fresh water. Fits all brands of phones and works with the case still on. Min device size (including case): 120mm. Max device size (including case): 173mm. Full dimensions in the last picture.

This is new to the market and is a 30 degree Cast Aluminium rod holder. Its super heavy duty and will work with downriggers and game rods no problem. Tube length is approx 240mm and gap between centres of 2 holes at the rear is 65mm and from either rear hole centre to front hole centre is 90mm.

You might freak when you see the price but honestly you get every cent of what you pay for. The new Shockwave S5-SS stainless steel suspension base is a fully welded construction using electropolished 316 stainless steel to last a lifetime. The Shockwave S5-SS is best suited for salt water environments with high salinity, humidity, and moderate to heavy sea conditions. Fitted with a FOX Rhythm air spring and shock with adjustable rebound and compression, suspension travel is 4-inch vertical and 1.5-inch forward, using a four-link forward action, mitigating deceleration associated with wave impact. It sits 220mm high when not in use and drops about 25mm with the weight of an adult. 

The series S PRO Integration is the same kits and specs as the PRO above except it comes with an additional Integration module instead of the standard dahs mounted control module to allow connectivity to most late model sounders/GPS units or Multi Function Displays. Check out the last photo for what comes in the Box.

As boat designs trend toward clean dashboards, larger displays, more flexibility and increased system integration, Zipwake’s Integrator Module gives boat owners a future-proof solution.

SEAMLESS INTEGRATION: Create your perfect set-up. The Integrator Module seamlessly connects the Zipwake system to multiple MFDs from different manufacturers – and even connects wirelessly to smart devices – keeping dashboards free of clutter. But it also offers the flexibility of connecting up to 3 control panels for operation via control wheels in addition to touch screens. A CAN interface enables further external system integration. For assurance, check with your MFD manufacturer to ensure compatibility with Zipwake’s Integrator Module.

WIRELESS CONNECTIVITY: For even greater control, the Integrator Module’s wireless interface lets you configure, operate, monitor, and update the system wirelessly via the Zipwake app on your smartphone or tablet.

EASY TO INSTALL – ANYWHERE: Just slightly bigger than a postcard, the discreet Integrator Module is easy to install behind the helm/dash, on the flybridge or in the engine room. It’s waterproof and comes with a special ethernet connector collar that makes sealing standard ethernet cables easy. A single cable connects the unit to an MFD.

The Scanstrut Flip Pro Multi is a Dual USB-C & 12V power socket. Combining features of the high-power Flip Pro Max and 12V Power Socket into a beautiful multi-power solution. Dimensions are 75mm by 45mm and depth required is 60mm. Universal fit for any USB-C connectors and is UV resistant, has a 316 stainless hinge and spring, is IPX4 waterproof with the cover closed. Input voltage is 12V system for Power Socket / 12V or 24V for Dual USB C Socket and it has a Red LED running light.

This is the one you need to lock the removable pin on your electric motor quick release bracket. ANYTHING LARGER WONT FIT. Made from 99% Stainless Steel it has a 30mm wide body with a 5mm shackle. Overall height is 60mm. Supplied with 3 keys for each lock and both locks are keyed alike.

Weighing only 7.4kgs, With its padded seat, arms, and backrest, this chair offers superior comfort for long, lazy afternoons on the boat or by the pool. The frame is crafted from heavy-duty yet lightweight anodised aluminium, giving it strength without unnecessary weight — easy to move, store, and transport. The chair’s wide base and non-slip feet ensure excellent stability whether you’re at sea or enjoying drinks on the dock. The premium ATLAS marine vinyl fabric is made to withstand harsh UV exposure and moisture, so your chair stays looking great through every season. Dimensions are 800mm high, 660mm wide and 370mm deep when set up.

Similar to the Bimini extension Kit above the difference to this one is that it secures to the boats existing rod rack with rail mounts and thumb screws. Its made so that it allows you to still remove rods from the overhead rack. Made from lightweight yet strong 25mm anodised aluminium poles for durability and adjustability. It provides reliable sun protection and is easy to remove and store when unused. Can be used at anchor or motoring up to 40 knots. Its available in two sizes and the 3 colours of Grey, Navy and Black in each size. See additional pictures for full dimensions.