Online Accessories Store

White 3mm 8 plait polyester venetian blind cord for lashing and other uses onboard or around the home. Available in either a 100mtr or 500mtr roll.

Made from pressed 304 grade stainless steel with cam action lever. The length adjusts by turning the threaded bolt and it has an integral eye that can be padlocked for security. Click on the pictures for further dimensions.

Made from cast 316 grade stainless steel, the pad eye folds down after use. 2 piece construction with a cast base with 3 x countersunk fastening holes and cast folding dee ring. Click on the pictures for further dimensions.

Made from 304 stainless steel they have a 2 piece body and dee ring that folds down and is only 14mm high when not in use. The overall dimensions of both are 65mm by 50mm and you can have either a 6mm by 40mm dee ring or a 8mm by 40mm dee ring.

Made from 304 stainless steel they have a welded eye and welded ring and 4 by countersunk holes drilled. Click on the 2nd picture to see the dimensions of each one. Note: the SWL is approx 25% of ultimate breaking load.

Made from 304 stainless steel they have a welded eye and 4 by countersunk holes drilled. Click on the 2nd picture to see the dimensions of each one. Note: the SWL is approx 25% of ultimate breaking load.

The Swivel Arm Bowsprit Small is a fixed 316 Stainless Steel Bowsprit perfect for any vessel up to 8m. Featuring a self launching design to ensure your anchor always drops. Universal mounting holes make this easy to install yourself with just a few bolts. If you’re looking for a self launching Bowsprit that not only looks great but performs flawlessly every time, you can’t go past the Swivel Arm Bowsprit. Dimensions are 78mm X 417mm.

The 316 Stainless Steel Savwinch Signature Bowsprit is designed to secure and house your anchor and suits almost all boats. This is our high end, premium Bowsprit which starts with a large piece of Stainless Steel that is folded, a second piece of Stainless Steel is then welded to the top, which is then polished our to create the perfect Bowsprit. The signature Bowsprit features 3 rollers, which allows for quick and easy anchor retrieval every time. If you look at the 1st picture you can see the 3 axle bolts along the side showing where the 3 rollers are. Dimensions are 78mm X 430mm.

If you don’t have an open Anchor Well and you don’t want to Deck Mount your Drum Winch you will require a Hawse Pipe. A Hawse Pipe gives a nice clean look and ensures the Winch is hidden away within the boat. Made from 316 stainless the small is great for boats under 7mtrs and suits almost all our trailer boats. the large is for boats over 7mtrs. The small has a base of 168mm X 100mm and an opening of 100mm X 48mm. The large has a base of 223mm X 100mm and an opening of 154mm X 48mm.

When you have an anchor well that is not strong enough to bolt the winch to, (like plastic Roto moulded wells on Quintrex and Stacer) then you fit this plate across the top and bolt the winch up to it from underneath. That way the winch is still hidden inside the anchor well. Works best with the 880 winch.

The largest in the range is the 1500. Everything in the main picture is supplied in the box. The 2nd picture is the dimensions of the complete winch. The last picture shows what length of chain and rope it comes with. Below if needed is the Hawse pipes, bow sprits, genuine Savwinch anchors and wiring loom kits. CLICK HERE for the full installation manual for all models.

The next in the range is the 1000. Everything in the main picture is supplied in the box. The 2nd picture is the dimensions of the complete winch. The last picture shows what length of chain and rope it comes with. Below if needed is the Hawse pipes, bow sprits, genuine Savwinch anchors and wiring loom kits. CLICK HERE for the full installation manual for all models.

The next in the range is the 880. Everything in the main picture is supplied in the box. The 2nd picture is the dimensions of the complete winch. The last picture shows what length of chain and rope it comes with. Below if needed is the Hawse pipes, bow sprits, genuine Savwinch anchors and wiring loom kits. CLICK HERE for the full installation manual for all models.

The Savwinch Signature Series (SS) is their premium range of Drum Winch and is what we fit on all our trailerboats. As we fit them inhouse, we genuinely know what we are talking about and are only a phone call away if advice is needed. They feature a complete stainless steel motor, designed locally and exclusively for Savwinch. Machined to fine tolerances and utilising O ring seals, the SS series motors are IP68 rated and are completely submersible without the use of sealants or glues. You no longer need to be concerned about water ingress or corrosion. The motors can be moved into 12 different positions to ensure that each Drum Winch can be installed on almost any vessel.

Once you select the correct size for your boat, the winch is generally mounted on the rear of the anchor locker, provided it is strong enough and reinforced with the backing plate on the inside of the boat. If you have an aluminium boat like a Quintrex with a roto moulded anchor well then just purchase the plate below and still mount the winch inside the anchor locker but bolt it to the plate upside down and bolt the plate across the top of the anchor well. They can also be mounted just on top of the deck. Check out all the pictures as one of them shows the different mounting options and what extra may be needed. The only one its doesn't show is when you mount the winch upside down to the custom plate below that is bolted across the top of the anchor well. (What we use on Quintrex and Stacer boats)

Everything in the main picture is supplied in the box. The 2nd picture is the dimensions of the complete winch. The last picture shows what length of chain and rope it comes with. Below if needed is the Hawse pipes, bow sprits, genuine Savwinch anchors and wiring loom kits. CLICK HERE for the full installation manual for all models.

With the short base ladders above, the gap between the top and bottom mounting arms is 275mm whereas with the 3 long base ones the gap is 430mm. You also get the choice of 3, 4 or 5 rung. All other dimensions and specifications are identical to what is above. There is dimensions in the last picture that shows the extended and retracted heights.

The Oceansouth Short Base Stainless Steel Folding ladder is designed to cater to boats with shorter transoms. It is available in two different sizes to accommodate your specific needs. With spacings of 260mm between the nylon steps and a ladder width of 290mm, they provide a comfortable and secure boarding experience. Crafted from 316-grade stainless steel fasteners and 25mm tubes, and finished with a high-polish shine, these ladders offer not only strength and durability but also an attractive appearance that complements your boat’s aesthetics. There is dimensions in the last picture that shows the extended and retracted heights and the gap between the top and bottom mounting arms is 275mm.

Transparent stickers to suit switches and switch panels above.

6 gang INLINE Stainless Steel switch panel with 15A backlit switches. The 15 Amp Backlit Switches are all pre-wired and are designed to make your life easier and more stylish. Boasting a bright and clear backlit display when pushed and turned on you just fit the appropriate decal for what its being used for. Switch label stickers are supplied as per photo. Face plate dimensions are 52mm by 203mm.

Kool Bags just got even better! Now with thicker 20mm insulation, they’re the perfect way to store your catch and keep it chilled and cold! They’re designed with a stable base so they don’t tip over, making them user friendly and easy to fill. Ideal for taking out on the boat! They feature a drain plug at one end for easy emptying, carry handles for easy moving and a fish ruler on the side so you can measure your catch before storing it! Dimensions are 500mm X 400mm X 400mm.

If the fixed length poles above are not long enough, then go with these aluminium telescopic ones. They are a little more expensive but give you heaps of options with the folded back storage height that will work best for your package. They are made from 25mm aluminium tube and have the nylon mounting bases and tube fittings included.

You can now get the Whitewater PRO Bimini with the Clamp on Rocket Launcher all in one package. The Rocket Launcher is made from 25mm double wall polished aluminium and has 6 high impact non corrosive polymer rod holders with a metallic finish. It suits all the boat types of open, runabout, half cabin, bowrider and ski. All Bimini's come with an integrated sock/boot system so you can fold it away for more room and high speed road trailering. Colour choices are Blue and Black. Please make a note which colour you would prefer when placing order. Click on Product Name above to see full details of fitting and sizing to suit your boat.

The Whitewater PRO Bimini is 0.9m high instead of 1.3m for the standard Whitewater above and it has heavy duty 3mm walled tube instead of the standard 2mm. They have an adjustable fixed arm at the rear. It's only 1.3m long so is great where you just need a bit of sun protection and then maximum fishing and casting room. It suits all the boat types of open, runabout, half cabin, bowrider and ski. All Bimini's come with an integrated sock/boot system so you can fold it away for more room and high speed road trailering. Colour choices are Blue and Black. Please make a note which colour you would prefer when placing order. Click on Product Name above to see full details of fitting and sizing to suit your boat.

The HD Heavy Duty version has all the same specs as the Shark Flex above except its slightly thicker, weighs 10kg instead of 9kg and has the strapping at the rear to better control and regulate the movement. Most importantly is rated to 140kgs over the standard 120kgs.

Take one look at Sharks back-saving suspension and you will see it right away..... Only one moving part (the shock absorber) mounted to two rugged, but elegant injection moulded leaf-springs which have a massive 200mm of movement without any of the sharp edges and pinch-points found on other suspension set ups. Measuring 300mm wide and 400mm high, (See pictures for all mounting dimensions) the Sharks unique "Flex" design absorbs impact on three-axis since waves don't just pitch straight up or down!

Ideal for making your ride softer.
• The Flex suspension unit is simple with only one moving part.
• Self adjusts for passengers from 40kg to 120kg.
• Exclusive stainless steel shock absorber.
• Three-axis shock mitigation for reduced whiplash from lateral and fore-aft forces.
• Small foot print.
• Non-corroding 316G stainless and Flexanite.
• Low maintenance.
• Tested 1 million full 10G impacts (200mm displacement, 100ms duration at 100kg payload).
• Light weight and easy to install.
• Complies with HSC 2000 Annex 10.
• 3 years warranty.