Online Accessories Store

When you have an anchor well that is not strong enough to bolt the winch to, (like plastic Roto moulded wells on Quintrex and Stacer) then you fit this plate across the top and bolt the winch up to it from underneath. That way the winch is still hidden inside the anchor well. Works best with the 880 winch.

The largest in the range is the 1500. Everything in the main picture is supplied in the box. The 2nd picture is the dimensions of the complete winch. The last picture shows what length of chain and rope it comes with. Below if needed is the Hawse pipes, bow sprits, genuine Savwinch anchors and wiring loom kits. CLICK HERE for the full installation manual for all models.

The next in the range is the 1000. Everything in the main picture is supplied in the box. The 2nd picture is the dimensions of the complete winch. The last picture shows what length of chain and rope it comes with. Below if needed is the Hawse pipes, bow sprits, genuine Savwinch anchors and wiring loom kits. CLICK HERE for the full installation manual for all models.

The next in the range is the 880. Everything in the main picture is supplied in the box. The 2nd picture is the dimensions of the complete winch. The last picture shows what length of chain and rope it comes with. Below if needed is the Hawse pipes, bow sprits, genuine Savwinch anchors and wiring loom kits. CLICK HERE for the full installation manual for all models.

The Savwinch Signature Series (SS) is their premium range of Drum Winch and is what we fit on all our trailerboats. As we fit them inhouse, we genuinely know what we are talking about and are only a phone call away if advice is needed. They feature a complete stainless steel motor, designed locally and exclusively for Savwinch. Machined to fine tolerances and utilising O ring seals, the SS series motors are IP68 rated and are completely submersible without the use of sealants or glues. You no longer need to be concerned about water ingress or corrosion. The motors can be moved into 12 different positions to ensure that each Drum Winch can be installed on almost any vessel.

Once you select the correct size for your boat, the winch is generally mounted on the rear of the anchor locker, provided it is strong enough and reinforced with the backing plate on the inside of the boat. If you have an aluminium boat like a Quintrex with a roto moulded anchor well then just purchase the plate below and still mount the winch inside the anchor locker but bolt it to the plate upside down and bolt the plate across the top of the anchor well. They can also be mounted just on top of the deck. Check out all the pictures as one of them shows the different mounting options and what extra may be needed. The only one its doesn't show is when you mount the winch upside down to the custom plate below that is bolted across the top of the anchor well. (What we use on Quintrex and Stacer boats)

Everything in the main picture is supplied in the box. The 2nd picture is the dimensions of the complete winch. The last picture shows what length of chain and rope it comes with. Below if needed is the Hawse pipes, bow sprits, genuine Savwinch anchors and wiring loom kits. CLICK HERE for the full installation manual for all models.

With the short base ladders above, the gap between the top and bottom mounting arms is 275mm whereas with the 3 long base ones the gap is 430mm. You also get the choice of 3, 4 or 5 rung. All other dimensions and specifications are identical to what is above. There is dimensions in the last picture that shows the extended and retracted heights.

The Oceansouth Short Base Stainless Steel Folding ladder is designed to cater to boats with shorter transoms. It is available in two different sizes to accommodate your specific needs. With spacings of 260mm between the nylon steps and a ladder width of 290mm, they provide a comfortable and secure boarding experience. Crafted from 316-grade stainless steel fasteners and 25mm tubes, and finished with a high-polish shine, these ladders offer not only strength and durability but also an attractive appearance that complements your boat’s aesthetics. There is dimensions in the last picture that shows the extended and retracted heights and the gap between the top and bottom mounting arms is 275mm.

Transparent stickers to suit switches and switch panels above.

6 gang INLINE Stainless Steel switch panel with 15A backlit switches. The 15 Amp Backlit Switches are all pre-wired and are designed to make your life easier and more stylish. Boasting a bright and clear backlit display when pushed and turned on you just fit the appropriate decal for what its being used for. Switch label stickers are supplied as per photo. Face plate dimensions are 52mm by 203mm.

If the fixed length poles above are not long enough, then go with these aluminium telescopic ones. They are a little more expensive but give you heaps of options with the folded back storage height that will work best for your package. They are made from 25mm aluminium tube and have the nylon mounting bases and tube fittings included.

You can now get the Whitewater PRO Bimini with the Clamp on Rocket Launcher all in one package. The Rocket Launcher is made from 25mm double wall polished aluminium and has 6 high impact non corrosive polymer rod holders with a metallic finish. It suits all the boat types of open, runabout, half cabin, bowrider and ski. All Bimini's come with an integrated sock/boot system so you can fold it away for more room and high speed road trailering. Colour choices are Blue and Black so make sure you select the correct one when ordering. Click on Product Name above to see full details of fitting and sizing to suit your boat.

The Whitewater PRO Bimini is 0.9m high instead of 1.3m for the standard Whitewater above and it has heavy duty 3mm walled tube instead of the standard 2mm. They have an adjustable fixed arm at the rear. It's only 1.3m long so is great where you just need a bit of sun protection and then maximum fishing and casting room. It suits all the boat types of open, runabout, half cabin, bowrider and ski. All Bimini's come with an integrated sock/boot system so you can fold it away for more room and high speed road trailering. Colour choices are Blue and Black. Please make a note which colour you would prefer when placing order. Click on Product Name above to see full details of fitting and sizing to suit your boat.

The HD Heavy Duty version has all the same specs as the Shark Flex above except its slightly thicker, weighs 10kg instead of 9kg and has the strapping at the rear to better control and regulate the movement. Most importantly is rated to 140kgs over the standard 120kgs.

Take one look at Sharks back-saving suspension and you will see it right away..... Only one moving part (the shock absorber) mounted to two rugged, but elegant injection moulded leaf-springs which have a massive 200mm of movement without any of the sharp edges and pinch-points found on other suspension set ups. Measuring 300mm wide and 400mm high, (See pictures for all mounting dimensions) the Sharks unique "Flex" design absorbs impact on three-axis since waves don't just pitch straight up or down!

Ideal for making your ride softer.
• The Flex suspension unit is simple with only one moving part.
• Self adjusts for passengers from 40kg to 120kg.
• Exclusive stainless steel shock absorber.
• Three-axis shock mitigation for reduced whiplash from lateral and fore-aft forces.
• Small foot print.
• Non-corroding 316G stainless and Flexanite.
• Low maintenance.
• Tested 1 million full 10G impacts (200mm displacement, 100ms duration at 100kg payload).
• Light weight and easy to install.
• Complies with HSC 2000 Annex 10.
• 3 years warranty.

Made in New Zealand from high strength UV stabilized polymer, the RAILBLAZA HEXX Universal Fish Finder Mount is a solid, lightweight, removable and elegant composite mount for fish finders up to 3kgs. Suitable for screens up to 12” from all your favorite brands including Humminbird, Lowrance, Garmin, Furuno and more. The design allows for 90° base rotation, 90° platform rotation & 180° tilt range. These 3 axes of adjustment allow a solution for the most complex fish finder mounting locations on your boat like consoles and bow mount solutions. The screen mounting pad is 250mm long and 60mm wide with multiple mounting holes and the round round base is 90mm in diameter. It stands 130mm high.

Only 25mm in height, the lens is 10 inches long and the overall length is 347mm or 14 inches. With 18 super bright 5630 SMD LEDs it puts out 288 Lumens and rotates 180 degrees. They surface mount and then the centre light bar swivels up and down. Perfect for not only reading but also ideal in a cabin or galley. 

Available in Blue or White, the Lumitec SeaBlaze Mini Underwater Lights are top quality and offer great value for their output and longevity. They have almost 900 Lumens output and their compact size means they can fit almost anywhere (See additional pictures for dimensions). They suit both 12V and 12V applications and have an anodized aluminium housing. Price is for a Pair

These are the light bars that we use on all our new boat installations now. The premium range of curved Lightbars are the apex predator of flood/spotlighting, aptly named the Mako series. The combination of flood and spotlight provides an even widespread beam while covering an extensive distance. The reflectors are designed with 94% reflector efficiency to take full advantage of the high performance CREE’s Next-Gen LEDs. These bad boys will eliminate darkness with an output of up to 22400 lumens! The die-cast aluminium housing is as rugged as it gets, torture tested to the extreme. These Mako Series Light Bars feature a large heat sink with a patented military-grade breather, GE Lexan lens and all 316-grade stainless steel hardware. The Mako Series Light Bars are built for the harshest environments. These Relaxn Mako Series Light Bars are available 20, 30 and 40-inch lengths and can be mounted almost anywhere. Kit Includes: 1 x Mako Series Light Bar, 2 x Mounting Brackets, 1 x Pre-wired Deutsch Plug (0.4m), 1 x Wiring Harness (4.2m) and 1 x 30A Relay.

You get both red and green lights all in the one housing and the optional stainless cover if needed all in one pack. Mounted on a horizontal surface these LED Port and Starboard lights are compact and bright. They are 12volt and the light comes with a stainless steel surround. Dimensions are approx 86mm by 69mm by 39mm high.

Made from 32mm anodised aluminium tube with UV resistant nylon components, “The Fisherman Top” is designed for small – medium “open style” boats. The top offers excellent shelter from the sun and rain as well as safe mounting for equipment on board such as Navigation lights, Antennas, Deck lights and Rod Holders. Note: Rod holders in the picture are an optional extra. Its very sturdy and travels well at speeds of up to about 70km/h on the water and is suitable for road trailering at moderate speeds. The bimini is 1.55m high from the deck mounting point and they are all 1.55m long as well. Its just the mounting width that varies. You can choose between navy blue or black material. Click on Product Name above to see full details of fitting and sizing to suit your boat.

This is the 1 piece black version. (The picture of the smaller pair just shows how they look from the left and the right.)

This is the 2 piece black housing version. (The picture of the smaller pair just shows how they look from the left and the right.)

Same specs and design as the Blue Axis kneeboard above except now available in a limited edition orange.

Weather Resitant and measuring 68cm by 40cm it's made of closed cell expanded polyurethane with a soft velure coloured top layer.